0x0000001E (KMODE EXCEPTION NOT HANDLED) – Fix for Windows

Here we can see, “0x0000001E (KMODE EXCEPTION NOT HANDLED) – Fix for Windows”

Symptoms and description

This error is linked to the error messages, alerts, warnings, and symptoms listed below.

Symptom 1: 0x0000001E error screen

The error indicates that the system error handler did not catch a kernel-mode program’s exception. A Blue Screen Error (BSOD) or a STOP code is most commonly displayed. When this happens, the computer immediately shuts off.

One of the following scenarios may result in the error:

1. Hardware issues.
2. Device drivers are incompatible.
3. System services are corrupted.
4. Software apps you’ve recently installed that might be incompatible with your Windows version.

A problem has been detect and Windows has been shut down to prevent damage
to your computer.

If this is the first time you’ve seen this Stop error screen,
restart your computer. If this screen appears again, follow these steps:

Check to be sure you have adequate disk space. If a driver is
identified in the Stop message, disable the driver or check
with the manufacturer for driver updates. Try changing video
adapters.

Check with your hardware vendor for any BIOS updates. Disable
BIOS memory options such as caching or shadowing. If you need
to use Safe Mode to remove or disable components, restart your
computer, press F8 to select Advanced Startup options, and then
select Safe Mode.

Technical information:

*** STOP: 0x0000001E (0x0000001E, 0x0000001E)

This Error’s Causes

One or more of the following factors have been linked to this error:

Cause 1: Faulty RAM module

The most typical reason for this error is a defective RAM module that causes read/to write errors regularly. If this is the case, the system memory should be scanned and the malfunctioning RAM module replaced.

Cause 2: Outdated or corrupt device drivers

Device drivers can become misconfigured, corrupt, or outdated over time. This can also happen after installing a Windows update or downgrading from a newer machine to an older one.

Getting rid of “0x0000001E” on Windows

Fix 1: Run a RAM test.

Check your RAM with the Windows Memory Diagnostic Tool if a malfunctioning RAM memory causes the error.

To do so, take the following steps:

1. Start by pressing the Start button.
2. In the search box, type Memory Diagnostics Tool.
3. Right-click on Memory Diagnostics Tool and select Properties.
4. Select the Run as Administrator option.
5. To begin the diagnostic procedure, follow the instructions.

If Windows Memory Diagnostic fails to produce results, you can utilize Easy Recovery Essentials’ Automated Repair tool to examine your RAM, HDD, and CPU all at once:

1. Download Easy Recovery Essentials.
2. The ISO image should be burned.
3. Easy Recovery Essentials is a great place to start.
4. Select Automated Repair from the drop-down menu.
5. Wait for the Automated Repair process to complete before clicking Continue. The Automated Repair process will report any problems with your hard disk or RAM.

Fix 2: Update or disable drivers

Run an automatic driver update or manually update the drivers to the latest versions to see if a defective drive causes the error.

Follow these steps to manually update a driver:

1. Start by pressing the Start button.
2. In the search box, type devmgmt.msc.
3. From the list of results, select devmgmt.
4. Select the driver with the right-click menu.
5. Select Update Driver Software to update the driver.
6. Select Disable to turn off the driver.
7. Select Uninstall to remove the driver.

Follow these procedures to perform an automated driver update:

1. Start by pressing the Start button.
2. Next, go to Printers and Devices.
3. Right-click on your PC and select “save target as.”
4. Choose the Device Installation Settings option.
5. Select Yes, and this will be done automatically.
6. Save your changes by clicking the Save button.
7. Continue the process by following the essential steps.

Fix 3: Turn off your antivirus software

This error can be caused by software applications such as antivirus software, backup software, and remote control software.

Disable any antivirus or malware detection software you have installed.

Fix 4: Check for new software

If a hardware incompatible device driver does not cause the 0x0000001E error, you can also see if any new software has been installed recently on your computer that could be causing the error.

If you’ve recently installed new software, consider uninstalling it and restarting your computer.

Conclusion

I hope you found this information helpful. Please fill out the form below if you have any queries or comments.

User Questions

1. How do I repair a Kmode exception that isn’t being handled?

• Make use of a repair tool.
• Install any drivers that are missing.
• Drivers for your network should be updated.
• Rename the file that is causing you problems.
• ON/OFF Gigabyte should be uninstalled.
• Remove your antivirus software from your computer.
• Set the CPU voltage manually.
• You should update your BIOS.

2. What is the reason for the Kmode exception not being handled?

When software or apps overwrite one other’s memory, the KMODE EXCEPTION NOT HANDLED error occurs. It causes the software to crash and a blue screen of death. The code shows on the blue screen and provides information about the error.

3. What is a kernel-mode trap error, and how do I fix it?

The UNEXPECTED KERNEL MODE TRAP error means that the CPU generated a trap that the kernel was unable or not permitted to handle or that the system is in an unrecoverable error. This is an error with Windows 11, Windows 10, Windows 8, and Windows 8.1.

4. BSOD ntoskrnl.exe 0x0000001E

BSOD ntoskrnl.exe 0x0000001E from techsupport

5. Frequent 0x0000001e BSoDs with no parameters. How do I troubleshoot?

Frequent 0x0000001e BSoDs with no parameters. How do I troubleshoot? from techsupport