Windows Error Recovery. Windows failed to start: Fix for Windows Vista, 7, 8, 8.1

Here we can see, “Windows Error Recovery. Windows failed to start: Fix for Windows Vista, 7, 8, 8.1”

For Windows Vista, Windows 7, Windows 8, and Windows 8.1 get the solution to the “Error: Windows failed to start” boot error.

Symptoms and description

This mistake is linked to the error messages, alerts, warnings, and symptoms listed below.

Symptom 1: Error: Windows failed to start error screen on startup

Only Windows 8 and Windows 8.1 users will see the “Windows failed to start” screen, characterised by a unique error code.

These issues can also occur on Windows Vista and Windows 7 computers.

This Error’s Causes

The following are the most prevalent causes of this error:

Cause 1: BCD is corrupted or absent

The BCD being absent or corrupted is one of the most typical reasons for this problem. This could occur due to disc write problems, power outages, boot sector viruses, or mistakes made while manually configuring the BCD.

Cause 2: The integrity of the file system has been violated

The file system may become corrupt or damaged for the same reasons. When a computer is turned off while it is in the middle of writing important data to the boot sector, this happens even more frequently.

Cause 3: System files have been corrupted

For the same reasons, system files can become corrupt or destroyed.

On Windows, How to Fix “Windows failed to start.”

Fix 1: Use Easy Recovery Essentials

Easy Recovery Essentials’ built-in Automated Repair solution is guaranteed to fix the “Windows Fault Recovery. Windows failed to start” error. EasyRE can be downloaded and produced on any PC and is presently available for Windows XP, Vista, 7, and 8.

1. Easy Recovery Essentials is a free download. Before you download EasyRE, note your Windows version (XP, Vista, 7, or 8).
2. The image should be burned.
3. Start your computer with the Easy Recovery Essentials CD or USB you made.
4. After EasyRE has started, select “Automated Repair” and click Continue.
5. After EasyRE has finished scanning your computer’s discs, find and pick the drive letter for your Windows installation from the list, and then click the Automated Repair option to start the repair process.
6. Easy Recovery Essentials will begin looking for faults on the selected drive. EasyRE will scan the disc, partition, bootsector, filesystem, bootloader, and registry for faults and rectify them automatically. EasyRE’s repair is automated; thus, no interaction is required.
7. EasyRE will provide its findings after the process is completed. To reboot your PC and test the changes, click the Restart option.
8. “Windows Error Recovery” is a programme that allows you to recover from errors in Windows. As your computer starts to load, the error “Windows failed to start” should be fixed.

Fix 2: Restart the computer in the Last Known Good Configuration

To access the Last Known Good Configuration option, follow these steps:

1. Your computer should be restarted.
2. Keep pressing F8 until you get a list of boot options.
3. Select the Last Known Good Configuration (Advanced).
4. Wait for the computer to boot up after pressing Enter.

Fix 3: Use the Windows installation CD to run System Restore

This procedure will only work if your Windows copy has the installation disc and System Restore turned on. To get to System Restore, follow these steps:

1. Place the Windows installation DVD in the drive.
2. When the message “Press any key to boot from CD or DVD” comes on your screen, press a key.
3. After selecting a language, time, and typing technique, click Repair your computer.
4. Click Next after selecting the drive where Windows was installed (typically C:\).
5. From the System Recovery Options window, choose System Restore.
6. To choose a restore point, follow the System Restore wizard’s instructions.
7. By selecting Finish, you can restore your computer.

Fix 4: Run chkdsk

You can also use the chkdsk command to check your system. The steps are as follows:

1. Restart your computer after inserting the CD.
2. When the message “Press any key to boot from CD” appears on your computer, press any key to boot into the CD.
3. At the Options menu, press R to bring up the Recovery Console.
4. Put your Administrator password in the box.
5. Press Enter
6. Type the following command in Command Prompt:

chkdsk C: /f /x /r

7. Press Enter

8. Restart your computer after the chkdsk process is completed.

Fix 5: Rebuild the master boot sector

You can recreate the master boot sector with Bootrec.exe (BCD). This utility can recover boot configuration data and is included in the Windows Recovery Environment (Windows RE).

BCD (Boot Configuration Data) is a file that includes boot configuration parameters and regulates how Windows is started.

1. Place your Windows installation DVD in the drive.
2. When the message “Press any key to boot from CD or DVD” appears, press any key.
3. After you’ve chosen your language, time, and typing method, click Repair your computer.
4. Click Next after selecting your Windows installation drive (typically C:\).
5. At System Recovery Options, choose Command Prompt.
6. After that, type the following command and click Enter:

bootrec /FixMbr

bootrec /FixBoot

bootrec /ScanOs

bootrec /rebuildBcd

Conclusion

I hope this information was helpful. If you have anything to add, please do so in the comments.

User Questions

1. What should I do if Windows Startup Repair fails?

• Click the Start button, then the arrow next to Shut Down, and finally Restart to restart your computer.
• As your computer restarts, press and hold the F8 key.
• Use the arrow keys to highlight Repair your computer on the Advanced Boot Options page, then press Enter.

2. What is the best way to avoid startup repair?

• Type bcdedit /set default recovery enabled No in Command Prompt and hit Enter.
• If you restart your computer, the Automatic Startup Repair feature should be disabled, and you should be able to access Windows 10 once more.
• If you need to re-enable it, execute bcdedit /set default recovery enabled Yes and hit Enter in CMD.

3. Is there a Windows 7 repair tool?

The Startup Repair tool repairs Windows 7 by replacing important operating system files that might be damaged or missing. Startup Repair is an easy diagnostic and repair tool to use when Windows 7 fails to start properly and you can’t use Safe Mode.

4. My Windows 7 Laptop is stuck in Error Recovery.

My Windows 7 Laptop is stuck in Error Recovery. from techsupport

5. Stuck in a loop on Windows Error Recovery on Windows 7

Stuck in a loop on Windows Error Recovery on Windows 7 from 24hoursupport