Startup Repair cannot repair: Fix for Windows Vista, 7

0
181
Startup Repair cannot repair: Fix for Windows Vista, 7

Here we can see, “Startup Repair cannot repair: Fix for Windows Vista, 7”

Find a solution to the problem. Unfortunately, on Windows Vista and Windows 7, startup repair will not automatically fix this PC.

Symptoms and description

This Error is linked to the error messages, alerts, warnings, and symptoms listed below.

Symptom 1: “Startup repair cannot repair this computer automatically” error screen on startup

When the OS automatically boots into Startup Repair, this problem notice occurs.

When you click “View problem details,” you’ll get more information, but no solution approach is provided. Instead, it would show variables specific to the computer, such as the Problem Event Name, OS Version, Locale ID, and so on.

Problem Event name : StartupRepairOffline
Problem Signature 01: 6.1.7
Problem Signature 02: 6.1.7
Problem Signature 03: unknown
Problem Signature 04: 212
Problem Signature 05: AutoFailover
Problem Signature 06: 25
Problem Signature 07: CorruptVolume
POS Version: 6.1.7
Locale ID: 10

Variables on your computer would very likely be extremely different from those listed above. So, for example, the name of the problem event can be StartupRepairV2 instead of StartupRepairOffline, and so forth.

Also See:  Boot critical file is corrupt: Fix for Windows Vista, 7, 8, 8.1

This Error’s Causes

Cause 1: The integrity of the file system has been violated

Disk write failures, power outages, and virus infections can harm the file system on a hard drive. If this is the case, the operating system will not load the system files to boot or repair properly, and the loading process will be interrupted.

On Windows, resolving the error “Startup repair cannot fix this computer automatically.”

Fix 1: Use Easy Recovery Essentials

Easy Recovery Essentials’ built-in Automated Repair solution is guaranteed to fix the “Startup repair cannot repair this computer automatically” issue. EasyRE can be downloaded and produced on any PC and is presently available for Windows XP, Vista, 7, and 8.

  1. Download Easy Recovery Essentials.
  2. The image should be burned.
  3. Start your computer with the Easy Recovery Essentials CD or USB you made.
  4. After EasyRE has started, select “Automated Repair” and click Continue.
  5. After EasyRE has finished scanning your computer’s disks, find and pick the drive letter for your Windows installation from the list, and then click the Automated Repair option to start the repair process.
  6. Easy Recovery Essentials will begin looking for faults on the selected drive. EasyRE will scan the disk, partition, bootsector, filesystem, bootloader, and registry for faults and attempt to automatically rectify them. EasyRE’s repair is totally automated; thus, no interaction is required.
  7. EasyRE will provide its findings after the process is completed. To reboot your PC and test the changes, click the Restart option.
  8. As your computer starts to boot, the error “Startup repair cannot repair this computer automatically” should be fixed.

Fix 2: Run chkdsk

The chkdsk procedure can be used. The steps are as follows:

  1. Place your Windows CD in the drive.
  2. When the message “Press any key to boot from CD or DVD” displays, press any key.
  3. After you’ve chosen your language, time, and typing method, click Repair your computer.
  4. Choose the installation drive for Windows, which is commonly C:.
  5. Next should be selected.
  6. From the System Recovery Options window, select Command Prompt.
  7. Type the following command when the Command Prompt appears:
chkdsk C: /f /r

where C: is the letter of your Windows installation drive (without the trailing slash, /) (usually C:)

8. Press Enter.

Also See:  Windows Startup in Infinite Reboot Loop: Fix for Windows XP, Vista, 7, 8, 8.1

Fix 3: Run the sfc /scannow command

Another solution is to use the sfc command (System File Checker).

The following are the measures to take:

  1. Your computer should be restarted.
  2. F8 should be pressed continuously until the “Startup Options” screen appears.
  3. Using Command Prompt, select Safe Mode.
  4. Type the following command into the Command Prompt when it appears:
sfc /scannow /offbootdir=d:\ /offwindir=d:\windows

5. Press Enter.

6. After the operation is completed, restart your computer.

Conclusion

I hope you found this information helpful. Please fill out the form below if you have any queries or comments.

User questions

1. How can I fix a Windows 7 startup repair that has failed?

  • Method 1: On the boot volume, run chkdsk.
  • Method 2: Turn off the auto-restart feature.
  • Using the sfc /scannow command (System File Checker) to restore the file system.
  • Method 1: Attempt to manually recreate the BCD.
  • Method 2: Manually repair Windows files.

2. What should I do if Startup Repair is unable to repair my computer?

  • Method 1: Disconnect All Peripheral Devices
  • Method 2: Open Bootrec.exe and run it.
  • Method 3: Run the CHKDSK command.
  • Method 4: Use the Windows System File Checker Tool.
  • Method 5: Restore the system.
  • Method 6: Resolve Startup Error Without Backing Up Your System

3. What is the best way to avoid startup repair?

Type bcdedit /set default recoveryenabled No in Command Prompt and hit Enter.

If you restart your computer, the Automatic Startup Repair feature should be disabled, and you should be able to access Windows 10 once more.

If you need to re-enable it, execute bcdedit /set default recoveryenabled Yes and hit Enter in CMD.

Also See:  Apple Releases Detailed List of Products That Should Be Kept Away From Medical Devices--Here Are They

4. Startup Repair Cannot Repair this Computer Automatically (Windows 7)

Startup Repair Cannot Repair this Computer Automatically (Windows 7) from techsupport

5. Windows 7 home, startup repair cannot repair this computer automatically, ad inifinitum

Windows 7 home, startup repair cannot repair this computer automatically, ad inifinitum from techsupport