How to Build a Raspberry Pi-powered NAS on the Cheap

0
500
How to Build a Raspberry Pi-powered NAS on the Cheap

Here we can see, “How to Build a Raspberry Pi-powered NAS on the Cheap”

Some fantastic Network Attached Storage (NAS) systems are available that can be purchased, installed, and operational in under an hour. The cost of these devices, which can range from $1,000 to $2,000 depending on what you require from connected storage, is a disadvantage. Fortunately, if you don’t have enough money or want to construct one yourself, a Raspberry Pi makes it simple.

This guide’s products are as follows:

Buy the Pi: Raspberry Pi 4 CanaKit ($65 at Amazon)
Download free NAS OS: OpenMediaVault (free)
Pick up some NAS HDDs: Western Digital 4TB ($100 at Amazon)

Also See:  How to Turn a Raspberry Pi into a Low-Power Network Storage Device

How to set up your own Raspberry Pi NAS

Raspberry Pis are a favorite of ours. They’re fantastic pieces of kit that allow anyone to buy a ready-to-use microcomputer that can do practically anything – within reason. The Raspberry Pi 4 can be used to run a home or office-based NAS, for example. In this step-by-step tutorial, we’ll use the OpenMediaVault software. Follow the steps below:

  1. On a PC, install OMV for Raspberry Pi.
  2. With the ISO image, create a bootable USB device.
  3. Connect the Raspberry Pi to the external hard discs.
  4. Connect the hard disc to the Raspberry Pi and turn it on.
  5. From the menu, choose Install.
  6. Follow the installation wizard’s instructions carefully (each step is well explained).
  7. The server will reboot when the upgrades have been implemented.
  8. Wait for OMV to complete the boot process.
  9. Use the command line to log in to the NAS (type “root” and click enter):
    • the root is the user name.
    • The password is the one you chose throughout the installation process.
  10. To see the set IP address, use the command ifconfig.
  11. Using the IP address in a browser on a PC, access the web interface.
  12. To access the web interface, go to:
    • User – admin.
    • Password – openmediavault.

After you’ve finished the installation and connected a device or two to the Raspberry Pi, you should think about the following:

  • Change the password for the website.
  • SSH, SMB, and FTP are among the protocols that can be activated.
  • For each device or partition you want to utilize, create a file system.
  • Friends and family can be added as users.
  • Make a shared folder.
  • Plug-ins must be installed (like the excellent Plex Media Server).
Also See:  How to Install a Wired Security Camera System

There is no such thing as a “best” solution for everyone when it comes to NAS. Price, storage capacity, functionality, noise, and power consumption are just a few of the considerations to consider. Synology and other solutions are good options if you want to plug and play, but they have certain drawbacks. A Raspberry Pi is significantly less expensive, enabling you to fine-tune how everything is set up, is great for individuals who don’t want to rely on third-party assistance, and allows you to master a NAS OS.

However, there are certain drawbacks. Within fences, space is scarce. When you put the little PC into a case, there’s no room for a hard disc drive (HDD), so you’ll need to use an external enclosure. In comparison to other NAS operating systems, there is also a steeper learning curve.

Conclusion

I hope you found this information helpful. Please fill out the form below if you have any queries or comments.

User Questions:

  1. Is it possible to use a Raspberry Pi as a NAS server?

Fortunately for us, setting up your Raspberry Pi as a NAS server has never been simpler. We can quickly and easily make a Raspberry Pi NAS box by utilizing the Linux distro OpenMediaVault. NAS stands for Network Attached Storage for the uninitiated.

  1. How much does a Raspberry Pi cost?

The Raspberry Pi Zero is the cheapest Raspberry Pi. It is identical to the Raspberry Pi Zero W, but it lacks Wi-Fi and Bluetooth. You can connect it to the internet through USB by connecting an Ethernet or Wi-Fi dongle, or you can share a PC’s internet connection with it.

  1. Does the Raspberry Pi have the ability to run Windows?

The Raspberry Pi is most commonly associated with the Linux operating system, which has difficulty dealing with the graphical intensity of other flashier operating systems. Users of the Raspberry Pi who want to run newer Windows operating systems on their devices are limited to Windows 10 IoT Core.

Also See:  Resident Evil: Code Veronica Is Getting a Fan Remake This Year
  1. Should I build a DIY NAS using a Raspberry Pi 4?

Should I use Raspberry Pi 4 for a DIY NAS? from raspberry_pi

  1. Is a Raspberry Pi NAS worth it?

Is a Raspberry Pi NAS worth it? from HomeServer