How to: Fix Something Happened and We Couldn’t Install a Feature

Here we can see, “How to: Fix Something Happened and We Couldn’t Install a Feature”

• • There are several issues with upgrading to Windows 10.
  • In this article, we looked into the What happened issue message that users reported seeing when trying to update to Windows 10 and provided comprehensive remedies.
  • The instructions below offer insightful information regarding this problem and address consumers’ concerns.

You could occasionally get the Something happened error notice while upgrading to Windows 10, which will result in a failed Windows 10 installation.

The message “Something happened” can appear in a variety of circumstances, and users have reported the following issues with this message:

• • Windows 10 Media Creation Tool there was a problem running this tool – Media Creation Tool occasionally has issues. Be sure to try some of our remedies if you run into this issue.
  • Something happened Windows 10 installation failed – This error may indicate an issue with your system locale if Windows 10 installation fails as a result. Simply switch your locale to English to see if it fixes the issue.
  • Windows 10 Something happened and we couldn’t install a feature – This warning has been reported on several users’ computers. Running Windows Update Troubleshooter might be all that is required to resolve this issue if it arises.
  • Something happened Windows 10 0x20016 – If you run into this error number, ensure all required services are up and functioning.
  • Something happened while installing Windows 10 – This error message may occasionally appear owing to partition space issues. Make sure to make some space available and run the installation once again to correct that.
  • Windows 10 create bootable USB something happened – Several users reported this problem while creating a bootable USB drive. This can be caused by your antivirus, so you might have to disable it temporarily.
  • Something happened Windows 10 Media Creation Tool – This issue could arise when utilizing the Media Creation Tool. You must launch the tool with administrative rights in order to resolve the problem.

Fortunately, we have several helpful options, and in this post, we’ll go over each one.

How can I fix the error message when updating Windows 10?

1. Disable or uninstall your antivirus software

1. 1. Search for Settings in the search box, then choose it.
   2. From the Settings menu, choose Apps.
   3. Enter “antivirus” into the search field and then click “Uninstall program.”

Try deleting your antivirus program if you have disabled it but still receive the message “Something happened.”

Remember that disabling your antivirus can expose your machine, so you may want to change to a new antivirus program.

You can also choose a third-party option if you want to avoid any security difficulties while uninstalling your antivirus software.

2. Make sure that you’re having enough space

1. 1. Type “Storage options” into the search bar and click on it.
   2. Check to see if there is adequate storage to update Windows 10

A storage space issue may be to blame if you receive the error message “Something happened” on your computer. Occasionally, updates won’t have enough room to install, which will result in the appearance of this error.

You must make available room on your system partition to resolve the problem. Although you can do it manually, we advise using specialized software like Ashampoo WinOptimizer.

The user interface is straightforward to use. Simply choose the Drive Cleaner option under the Maintain system menu, and the software will remove all unnecessary files for you.

3. Use an Administrator account

1. 1. Right-click the Media Creation Tool.exe file you found.
   2. From the menu, select Run as administrator.
   3. Continue with the Windows update.

4. Make sure that certain services are running

1. 1. Type “Services” into the search bar and click Services.
   2. Search for the following services when the Services window appears:
      • Automatic Updates OR Windows Update
      • Background Intelligent Transfer Service
      • Server
      • Workstation
      • TCP/IP NetBIOS Helper
      • IKE and AuthIP IPsec Keying Modules
   3. Double-click any of the services we listed to access it.
   4. Look under Startup type. Ensure that Automatic is selected as the Startup type.
   5. Check the status of the service next. Then, click the Start button to launch that service if it isn’t already running.
   6. To save the changes, click OK and then Apply.
   7. For all of the services we listed in Step 2, you must repeat Steps 3 and 4.
   8. Close the Services window once you’re finished, then restart your computer.

5. Delete SoftwareDistributionDownload folder

1. 1. Go to                                                                      C:WindowsSoftwareDistributionDownload folder
   2. As an administrator, launch Command Prompt.
   3. In the list that appears, press Windows Key + X and select Command Prompt (Admin).
   4. Start Command Prompt and enter the following commands:  

      • net stop wuauserv

   5. Delete everything from folder

      • C:WindowsSoftwareDistributionDownload

   6. Reopen Command Prompt and execute the code provided here:

      • net start wuauserv

      • wuauclt.exe /updatenow
   7. Command Prompt should be closed before choosing Windows Update in the Control Panel.

6. Make sure that your Taskbar is positioned properly

If you attempt to update to Windows 10 while your Taskbar is not positioned at the bottom of the screen, a notification titled “Something happened” may show.

Although this is a rare problem, if your Taskbar has been moved to another area, simply slide it back to the bottom of the screen and attempt updating to Windows 10 once more.

7. Change your system locale

1. 1. Use the Control Panel to open the region.
   2. Click the Change system locale button on the Administrative tab.
   3. Ensure English (United States) is selected under the Current system locale.
   4. To save the changes, click OK.
   5. For the Region window to close, click Apply and OK.
   6. Switch off your computer.
   7. Start the Media Download Tool, then redownload the Windows 10 ISO.

8. Use English as your default language

Using a language pack, you could occasionally encounter the Something happened error. You must uninstall all language packs that aren’t in English from your computer and use an English pack to resolve this problem.

However, numerous users who were using different English language packs, such as en-AU or en-UK, reported experiencing this problem.

To resolve that issue, you must delete any additional language packs from the Settings app’s Region & language settings area.

Additionally, ensure that the en-US English pack is your default language.

9. Add new DWORD to Registry

1. 1. By hitting Windows Key + R and typing regedit, you can launch Registry Editor.
   2. To launch Registry Editor, click OK or press Enter.
   3. Navigate to the following key in the left pane:
      • HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdateOSUpgrade
   4. You will have to make the key if it doesn’t already exist. For example, go to the following key and right-click it to create the OSUpgrade key:
      • HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdate
   5. Select Key under New.
   6. The newly produced key is called OSUpgrade.
   7. Activate the OSUpgrade key.
   8. Select New and DWORD (32-bit) Value from the context menu from the right pane.
   9. Give the new DWORD the name AllowOSUpgrade.
   10. To view the AllowOSUpgrade DWORD’s attributes, double-click on it.
   11. Value data should be set to 1, then click OK to save the changes.
   12. Restart Windows Update after shutting off Registry Editor.

10. Use Windows Update Troubleshooter

1. 1. Open the Command Prompt in administrator mode.
   2. Disable Windows Update, the Cryptographic service, and the BITS service. Enter the lines below, pressing Enter after each line to complete:
      • net stop bits
      • net stop wuauserv
      • net stop appidsvc
      • net stop cryptsvc
   3. Rename backup copies used for program distribution. Enter the following commands into Command Prompt, one line of code after another, to accomplish that:

      • Ren %systemroot%SoftwareDistribution SoftwareDistribution.bak

      • Ren %systemroot%system32catroot2 catroot2.bak

   4. By executing the following commands, you can now restart the BITS service, Windows Update service, and Cryptographic service:
      • net stop bits
      • net stop wuauserv
      • net stop appidsvc
      • net stop cryptsvc
   5. Start your computer up again, then update to Windows 10.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions

1. How can we disable the event that prevented us from installing a feature?

1. 1. Temporarily disable your antivirus software.
   2. Problems With Storage.
   3. The SoftwareDistribution folder should be deleted.
   4. The default language of the system can be changed.
   5. The system locale should be changed.
   6. Verify the position of the taskbar.

2. How can we prevent Windows from getting a new feature?

1. 1. Install failing language files. For this option an internet connection is required, and Windows Updates should be enabled. Click on Start > Settings > Time & Language > Language. 
   2. Disable the task schedule. Open Control Panel and head over to Task Schedular.

3. How do I fix a Windows Installer error?

1. 1. Click Start, then enter services.
   2. Right-click Windows Installer and select Properties.
   3. Change the Startup type box to Manual if it is currently set to Disabled.
   4. To close the Properties window, click OK.
   5. Select Start from the context menu of the right-clicked Windows Installer service.
   6. Retry installing or uninstalling.

4. Something happened, and we couldn’t install a feature. – Reddit

"Something happened, and we couldn’t install a feature." from techsupport

5. Something happened, and we couldn’t install a feature. – Reddit

"We are adding some new features" | "Something happened, and we couldn’t install a feature." from Windows10