Network Protocol Missing in Windows 10

Here we can see, “Network Protocol Missing in Windows 10”

• A network comprises at least two computers that are connected to shared resources. This straightforward networking description applies to any operating system and version, including Windows 10.
• There isn’t much left to do with the network if protocols don’t perform as expected, or worse, if they’re missing. Network Protocol Missing is one of the most aggravating network-related problems.
• This annoying problem slows down the sharing procedure and can also block machines from connecting to the internet. However, alternatives are as annoying as they may appear, and we’ve compiled the best of them in the post below.
• Are you interested in learning more about Windows 10 issues and how to fix them? In our dedicated section, you’ll find all you need to know.

Networking is an important element of the Windows 10 experience, and one of the most frustrating network issues is the lack of Network Protocols. So let’s check whether there’s a method to remedy this mistake because it seems significant.

Users report being unable to share files between network machines and, in some cases, even accessing the internet. As you can see, this issue can cause many problems, but there are a few options that can help.

How can I fix the missing Network Protocol issue in Windows 10?

Aside from the Network protocol missing error, the same offenders may be responsible for several other difficulties. Consider the following scenario:

• The registry entries for Windows sockets, which are essential for network connectivity, are missing.
• This PC lacks one or more network protocols.
• We were unable to implement the desired feature.
• Error with network protocols Windows 10 is the latest version of Microsoft‘s operating.
• This PC lacks one or more network protocols. WiFi

So, regardless of the error number, you can use the remedies listed below to solve the problem (hopefully).

Solution 1: Turn off your antivirus software for the time being

Although it is not a good idea to uninstall your antivirus program, some users have reported that their problems have been fixed after removing Kaspersky Internet Security.

If you’re using Kaspersky Internet Security, you might try temporarily disabling it or switching to another antivirus program. Additionally, reinstalling antivirus software may be beneficial.

Solution 2: Reset network protocols to their default values

Resetting network protocols to default settings is another thing we’ll attempt. This will be accomplished by resetting the TCP/IP stack. If you’re not sure how to do it, simply follow these steps:

• As an administrator, open Command Prompt.
• When the Command Prompt window appears, type the following commands:
• set dns netsh int ip
• reset Winsock netsh
• Close Command Prompt and verify that the problem has been repaired.

Solution 3: Turn off NetBIOS

1. Select Control Panel > Network and Internet > Network Connections from the drop-down menu.
2. Select Properties from the right-click menu for your network adapter.
3. Tap IP v4 (TCP/IP) from the drop-down menu and select Properties.
4. Then select Advanced.
5. Next, navigate to the WINS tab and disable NetBIOS over TCP/IP in the NetBIOS settings section.
6. To save your settings, click OK.

Some users say this problem can be remedied by utilizing an automated IP address rather than a static IP address. Simply follow the first three steps in this solution to modify this setting.

When you open IPv4(TCP/IP) Properties, you should see an option to choose whether you want to use a static IP address or one that is assigned to you automatically.

Solution 4: Use Command Prompt

1. As an administrator, open Command Prompt. To do so, type Command Prompt into the search bar, right-click Command Prompt from the list of results and select Run as administrator.
2. To execute netcfg -d, type it into Command Prompt and click Enter.
3. Wait for the procedure to finish. Your computer should restart after the process is completed, and the problem should be resolved.

Some users also recommend using the netsh int ipv4 install command. To perform netsh int ipv4 install, simply open Command Prompt as administrator and put netsh int ipv4 install into Command Prompt.

After that, reboot your computer to see if the problem has been resolved.

Solution 5: Use Command Prompt and sc.exe

This is a temporary fix, and if the problems return after a new Windows 10 update, you may need to revert the adjustments. This is what you must do:

1. As an administrator, open Command Prompt.
2. Type the following lines, pressing Enter after each one to run them:

• depend= bowser/mrxsmb10/nsi sc.exe config lanmanworkstation
• sc.exe config mrxsmb20 start= disabled

The problem should be resolved after entering these lines into Command Prompt. However, if you’re having problems after installing a Windows 10 update, you might wish to go back to the default settings. To do so, follow the steps below:

1. As an administrator, open Command Prompt.
2. Enter the following lines, pressing Enter after each one to run it:

• depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config lanmanworkstation
• start=auto sc.exe config mrxsmb20

Solution 6: Use a different computer to import Winsock keys

We must emphasize that this is a sophisticated method, and if you aren’t careful or don’t know how to edit a registry, you should not do it since you risk damaging your operating system.

If you decide to go on, you’ll need a new computer with no network protocol issues. You do not need to use a Windows 10 PC. This is what you must do:

1. On a functional Windows computer, Locate the following keys in Registry Editor:
   • HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock
   • HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
2. 2. These keys should be exported and saved to a USB flash drive.
3. Switch to a Windows 10 PC with Network Protocols difficulties.
4. Remove the network driver.
5. Locate the following keys in Registry Editor:
   • HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock
   • HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
6. If you need a backup, you can export them. Remove both keys after exporting them.
7. Your computer should be restarted.
8. Insert the USB with Winsock keys from a different machine when your computer restarts.
9. Return to Registry Editor.
10. Go to the location where those keys were (HKEY_LOCAL_MACHINESystemCurrentControlSetServices)
11. If Winsock2 key is back, delete it again.
12. Import the following keys from your USB:
    • HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock
    • HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
13. Close the Registry Editor window.
14. Run the netsh winsock reset command as an administrator in Command Prompt.
15. Your computer should be restarted.

Solution 7: Reset your router and double-check your cable

If none of the above methods were successful, try resetting your router. Turn it off first, then turn it back on after a few moments.

You can also connect your PC to the router with a different LAN cable.

Finally, push the little button on the back of your router to restore factory settings (actually, the position of the reset button depends on your router).

Solution 8: Reinstall your Network Adapter

You might want to reinstall your Network Adapters after completing the procedures above. Here’s how you can do it:

1. Press R while holding down the Windows Key.
2. In the input field, type hdwwiz.cpl and click OK.
3. Expand Network Adapters, right-click on your Ethernet card, and select Uninstall device from the menu that appears.
4. When the confirmation box displays, select Uninstall from the drop-down menu.
5. Use the driver that came with your network device to reinstall it.

Solution 9: Use Network Troubleshooter

Microsoft has released a new troubleshooting tool if you’re running Windows 10 Creators Update (or later). This troubleshooting tool is intended to address various problems with the Windows operating system, including network faults.

If you’re not sure how to use this troubleshooter, simply follow these steps:

1. Now go to Settings and select Updates & Security > Troubleshoot
2. Internet Connections to Consider
3. Wait for the wizard to complete the process after following the on-screen instructions.
4. Start your computer again.

If the problem still persists, try using the Network Adapter option instead of Internet Connections.

Solution 10: Restore network components

You can also try resetting the network components listed below:

As an administrator, open Command Prompt.

When Command Prompt appears, type the commands below and click Enter after each command:

• IPconfig /release
• IPconfig /flushdns
• IPconfig /renew

Solution 11: Update BIOS

Finally, several customers have found that updating the BIOS resolves the issue. However, before you go all in and flash your BIOS, we must caution you that it is a potentially dangerous procedure, as one wrong move could render your motherboard inoperable.

Do it just if you’re confident in your abilities.

Conclusion

I hope you found this information helpful. Please fill out the form below if you have any questions or comments.

User Questions

1. What steps should I take to re-establish network protocols?

1. As an administrator, open Command Prompt.
2. Enter the following commands in Command Prompt: netsh int ip set dns. netsh winsock reset.
3. Close Command Prompt and verify that the problem has been repaired.

2. How do I figure out what network protocol I’m using?

Choose Settings, then Control Panel from the Start menu. Double-click Network to access the Network control panel when the Control Panel appears. Check whether NetBIOS, NetBEUI, or TCP/IP (or LANBIOS, if you’re using a LANtastic network) are mentioned under the Protocols tab.

3. What if there aren’t any protocols in place?

A system of rules or processes for exchanging data between electronic devices, such as computers, is known as a protocol in computer science. A transmitting computer, for example, could send data in 8-bit packets while the receiving computer expects 16-bit packets if there is no protocol in place.

4. One or more network protocols are missing on this computer

"One or more network protocols are missing on this computer" from Windows10

5. Network Protocols Missing Windows 10 – need help – Reddit

Network Protocols Missing Windows 10 – need help from techsupport