10.0.0.1 Default Router IP Login Complete Guide.
Default Username and Password
IP Address: 10.0.0.1
Username: admin
Password: password
Default username & password combinations for devices that use 10.0.0.1 as their default IP address
| # | Username | Password |
| 1 | admin | password |
| 2 | admin | admin |
| 3 | (blank) | public |
| 4 | user | user |
| 5 | Cisco | Cisco |
| 6 | public | |
| 7 | (blank) | (blank) |
| 8 | cusadmin | highspeed |
| 9 | enduser | password |
| 10 | (blank) | 1234 |
| 11 | n/a | public |
| 12 | (blank) | printed on router |
| 13 | ipbbx | ipbbx |
| 14 | (blank) | |
| 15 | admin | (blank) |
How to: login to 10.0.0.1?
- To begin, open a web browser.
- Type 10.0.0.1 in the address bar or go to http://10.0.0.1.
- You’ll be taken to a login page. Enter your router’s admin panel’s username and password. (A list of default router usernames and passwords can be found here.)
- You’ll now be logged into your router’s settings or admin panel, where you may make the necessary modifications.
What If You Can’t Connect to 10.0.0.1?
There are three primary reasons why individuals are unable to connect to 10.0.0.1:
- For security reasons, most routers can only be accessed through the 10.0.0.1 IP address of a computer to which they are directly connected with an Ethernet cable. Some routers allow you to adjust this setting, but the majority do not. A moderately long Ethernet cable will not set you back much, and your desktop computer should already have one. If you only have a laptop, a USB adaptor can be found for a few bucks on Amazon or at your local electronics store.
- Even experienced network administrators make the mistake of typing 10.0.0.0.1 instead of 10.0.0.1. Just remember that all IPv4 addresses have just four digits, not five, six, or 10. If you’ve changed your router’s IP address from 10.0.0.1 to something else and can’t remember what it was, we recommend resetting it to its default settings. On the back of the router, there should be a restore button.
- Wrong login and password: Routers are password-protected to prevent unauthorized users from altering your settings and jeopardizing your security. The most common username/password combinations are listed here, although the default username and password should be put on a sticker somewhere on your router.
10.0.0.1 Troubleshooting
If you can’t get into the Admin Panel through 10.0.0.1, it’s possible that:
- You typed the IP address incorrectly. You may have typed “O” instead of “0,” preventing your browser from accessing the Admin Panel.
- Your browser is unable to complete your request because you have added an extra digit or dot.
- Your device’s default IP address may be something different than 10.0.0.1, such as 192.168.0.1 or 192.168.1.1.
- You are not using an Ethernet cable to connect to the network. Use an Ethernet cable to connect to the router.
Issues with 10.0.0.1
While trying to enter the Admin Panel using 10.0.0.1, you may run into certain problems. These problems could include:
10.0.0.1 took too long to respond
192.168.1.1, 192.168.0.1, and 192.168.1.254 are all good options for logging.
If you’re still having problems, it’s possible that there’s a problem with the wire you’re using or with the router’s hardware. Looking for any loose connections and rebooting your router is a frequent solution.
Incorrect IP Address
Make sure you type the IP address correctly; it’s common to mistype it as 10.0.0.0.1, which is an invalid URL. 10.0.0.1 is the right IP address. If you type 10.0.0.0.1 into your browser, it will send you to the Google search results page or the default search engine you selected. Even if you add https:// at the beginning of the URL, it will be invalid.
Unresponsive gateway device
Technical errors are to blame for this mistake. If the problem still exists, you should reboot your router.
Incorrect client address assignment
This occurs on a wireless network when IP addresses are allocated automatically to customers, resulting in your device’s IP address being something other than 10.0.0.1.
User Questions
1. What is 10.0 0.1?
The default IP address is 10.0.0.1. The IP address is always made up of four sets of integers, ranging from 0 to 255. This is because each internet-connected gadget is intended to have its own address. The network id is represented by the first three sets, whereas the device id is represented by the last set. The network id in 10.0.0.1 is 10.0.1, which is the device id.
2. How to log in to 10.0 0.1 / How to login into 10.0 0.1 / How to use 10.0 0.1
To begin, go to your browser’s address bar and type 10.0.0.1. Then, after entering your username and password, click OK or Login.
3. What are the (most common) default logins for 10.0 0.1?
Username: admin, Password: admin, are the most popular default logins for the 10.0.0.1 IP address.
4. What is the (most common) default username for 10.0 0.1?
The username “admin” is the most popular default username for the 10.0.0.1 IP.
5. What is the (most common) default password for 10.0 0.1?
For the 10.0.0.1 IP, the most frequented default password is admin.
6. 10.0 0.1 – How to Access Router IP Address?
To get started, type 10.0.0.1 into your browser’s address box, then enter your username and password and click OK or LOGIN.
The most common default logins to access 10.0.0.1 are – username: admin, password: admin
7. How to login into 10.0 0.1 / Hot to go to 10.0 0.1 / How to use 10.0 0.1
To get started, type 10.0.0.1 into your browser’s address box, then enter your username and password and click OK or LOGIN.
The most common default logins to access 10.0.0.1 are – username: admin, password: admin
