Here we can see “0x0000006B: PROCESS1_INITIALIZATION_FAILED”
Symptoms and description
This Error is linked to the error messages, alerts, warnings, and symptoms listed below.
Symptom 1: On starting, a 0xc000006b error screen appears.
The ntdll.dll file is a Microsoft library that mostly provides NT kernel functionality. It must be located in the percent windir percent /system32 folder for the system to load properly. The 0x0000006b error screen appears if it is missing or corrupt.
An error screen that appears on Windows XP, Vista, and Windows 7 is seen below.
A problem has been detected and Windows has been shut down to prevent damage to your computer. PROCESS1_INITIALIZATION_FAILED If this is the first time you’ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x0000006B (0x00000034, 0x00000002, 0x00000000, 0x00000000)
Here’s an example of a Windows 8, Windows 8.1, or Windows 10 error screen:
Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you(80% complete) If you'd like to know more, you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
Symptom 2: On Windows 7 or Windows Server 2008 R2, the 0xc000006b error screen appears.
A corrupted Bootcat frequently causes this problem.cache file or a change in the size of the Bootcat.cache file since the last successful start on Windows 7 with no Service Packs loaded or on Windows Server 2008 R2. Service Pack 1 for Windows 7 and Windows Server 2008 R2 fixes this problem.
This Error’s Causes
One or more of the following factors have been linked to this error:
Cause 1: NTDLL.dll file is missing or corrupt
The NTDLL.dll file, stored in percent windir percent /system32, is a critical component of the Windows boot process, and if it is corrupted or missing, the system will not function properly. Disk read/write problems, virus attacks, and power outages can all cause this.
Cause 2: The file Bootcat.cache is corrupt
This issue occurs when the Bootcat.cache file is corrupted or modified on Windows 7 and Windows 2008 R2 without Service Packs installed. If this is the case, the user should remove the file manually or install Microsoft’s current Service Pack.
Getting rid of “0x0000006B” on Windows
Fix 1: Replace the DLL
You can restore the original ntdll.dll file from your Windows XP installation DVD if ntdll.dll is indeed missing or corrupt.
- Put your Windows XP CD into the machine.
- Your computer should be restarted.
- When you get the “Press any key to boot from CD” message, press any key to boot into the CD.
- When the Options screen displays, press R to start Recovery Console.
- To enter your Administrator password, type it in and press the Enter key.
- Now that you’ve reached the Command Prompt, type the following command, replacing D: with the letter of the CD drive and C: with the letter of the drive where Windows was installed:
copy D:\i386\ntdll.dll C:\Windows\system32\ntdll.dll
7. If prompted to overwrite this file, select Yes, and then press Enter to complete the action.
8. Your computer should be restarted.
Here’s an example of what the console output on a PC should look like when the ntdll.dll file has been properly restored:
Fix 2: Attempt NTDLL replacement with Startup Repair
Startup Repair can be used to scan the system for damaged or missing system files and replace the ntdll.dll file if it is faulty or missing on Windows Vista, Windows 7, Windows 8, and Windows 8.1.
Startup Repair is an automated diagnosis and repair program that comes with the Windows installation disc and may be used to discover and fix various issues. In our knowledge base, you may learn more about how Startup Repair works and what it does. The Startup Repair procedure from the Windows setup CD is as follows:
- Place your Windows installation DVD in the CD-ROM drive of your computer.
- Make sure your computer is completely turned off by shutting it down completely.
- Turn on your computer.
- When you see “Press any key to boot from CD or DVD,” press any key.
- After selecting your language and keyboard selections, click the “Repair your computer” link in the bottom-lefthand corner.
- Wait for Startup Repair to finish scanning your computer for Windows installations, then choose yours from the list:
- To get started, select “Startup Repair” from the list of potential recovery options:
- Startup Repair will begin checking your installation for known problems and, if possible, will repair them.
Fix 3: Use the SFC command to repair corrupted system files.
On Windows Vista, Windows 7, Windows 8, and Windows 8.1, the built-in Windows SFC (system file checker) program can be used to scan and repair a computer’s system files automatically.
The steps to run SFC are as follows:
- Start by booting from your Windows installation DVD.
- After selecting the appropriate language, time, and keyboard input, click Repair your machine.
- Click Next after selecting the Windows installation drive, commonly C:\
- When the System Recovery Options box displays, select Command Prompt.
- After that, type the following command and click Enter:
sfc /scannow /offbootdir=D:\ /offwindir=D:\Windows\
D:\Windows is the location of the Windows folder, and D:\Windows is the letter of the driver where Windows is installed.
Fix 4: Delete the Bootcat.cache file and install Service Pack 1 (SP1).
If the error is caused by a corrupt Bootcat.cache file, you can manually delete it and then apply the Service Pack to resolve the issue once the system has loaded successfully. To do so, take the following steps:
- Place the Windows 7 installation DVD in the optical drive.
- Restart the computer if necessary.
- Start by booting from the DVD.
- Select Repair your machine or press R on the Install Windows screen.
- Select Command Prompt from the System Recovery Options menu.
- Type the letter of the drive where Windows 7 is installed in Command Prompt when it appears.
- If D: is not your normal installation drive, replace it with the letter of the disk where Windows 7 is installed.
D:
8. Press Enter
9. Then type:
cd windows\system32\codeintegrity
10. Press Enter
11. Type:
del bootcat.cache
12. Press Enter
13. Restart your computer
Follow these instructions to install the Service Pack after your computer has loaded successfully:
- Start by pressing the Start button.
- Select All Programs from the menu.
- Select Windows Update from the drop-down menu.
- Check for updates by clicking Check for updates.
- Choose a Microsoft Service Pack (KB976932).
- Click the OK button.
- Install Updates is the next option.
- When prompted, enter the Administrator password.
- To finish the installation, follow the directions on the screen.
Fix 5: Run the CHKDSK software on the hard disk
If the file integrity of the hard drive has been compromised, the built-in Windows CHKDSK software can be used to scan the disk and correct the file system issues.
The steps to run CHKDSK are as follows:
- Start by booting from your Windows installation DVD.
- After selecting the appropriate language, time, and keyboard input, click Repair your machine.
- Click Next after selecting the Windows installation drive, commonly C:\
- When the System Recovery Options box displays, select Command Prompt.
- After that, type the following command and click Enter:
chkdsk C: /f
Substitute the letter C with the letter of the driver on which Windows is installed.
Conclusion
I hope you found this information helpful. Please fill out the form below if you have any queries or comments.
User Questions:
1. What does it mean when initialization fails?
The network status indicator shows SOS on the Home screen, indicating that the BlackBerry smartphone can only connect to the wireless service provider’s network to make emergency calls. The problem may occur every time the device is rebooted, or sometimes it may occur.
2. Is it possible that Unmountable boot volume is a virus?
When one of the files that keep your system running becomes corrupted, it can cause various problems. One of these issues is the inability to boot into Windows 10, which causes the “Unmountable boot volume” error. Malware, human mistake, or an application could all be blamed for the corruption.
3. What exactly is the Bootcat cache?
C:bootcat.cache is a file that may be found at the following location: C:bootcat. cache
Windows\Ssystem32\Codeintegrity. Windows is installed on the C: partition by default, and the default name is Local Disk (C:). We’ll demonstrate how to get rid of Bootcat.
4. Windows 7 Pro x64 BSoD STOP: 0x0000006B – Reddit
Windows 7 Pro x64 BSoD STOP: 0x0000006B PROCESS1_INITIALIZATION_FAILED from techsupport
5. 0x0000006b Error : r/24hoursupport – Reddit