How to: Fix Windows Update Error 0x8007001f

0
188
How to: Fix Windows Update Error 0x8007001f

Here we can see, “How to: Fix Windows Update Error 0x8007001f”

  • The audio drivers are to blame for the Windows Update error 0x8007001F, but our tutorial will show you how to solve it easily.
  • Unfortunately, this issue prevents you from updating your operating system; thus it must be resolved as soon as possible.
  • We’ve compiled a list of all viable options, including using the Microsoft Update Assistant.

Update issues are nothing new in the history of the Windows operating system. Some of them are simple to solve, while others are rather difficult.

Today, we’ll look at the code 0x8007001F, which indicates a problem. This problem is linked to audio drivers, prohibiting Windows 10 users from updating.

There are a couple of possible remedies for this issue, so follow these procedures, and perhaps we’ll be able to figure it out.

Other symptoms of the 0x8007001F Windows Update error

The update error 0x8007001F can prevent you from installing the most recent updates, which can be a major inconvenience. In terms of update troubles, users have reported the following issues:

  • With problem 0x8007001f, Windows was unable to install the following update — Third-party apps are frequently to blame for this issue, so if you get it, consider removing your antivirus or doing a clean boot.
  • Error 0x8007001f with Windows 10 Update Assistant – Because your drivers can sometimes cause this problem, it’s a good idea to update critical drivers before attempting to upgrade Windows.
  • Error in updating Windows 7 is the latest version of Microsoft’s operating
    • Update problems can also be found in older versions of Windows.

Even if you don’t have Windows 10, you should be able to use most of our solutions without issue on older versions of Windows.

Also See:  How to: Fix Microsoft Office Picture Manager Is Not Saving Edits

How can I fix the 0x8007001F update problem on Windows 10 and 11?

1. Run the troubleshooter for Windows updates

  1. Select Settings from the Start button.
  2. Select Update & Security from the drop-down menu.
  3. From the left pane, click Troubleshoot, then Additional Troubleshooters from the right.
  4. To run the troubleshooter, expand Windows Update and then click the Run the troubleshooter button.
  5. The system will look for any issues with the update and try to fix them. To continue, simply follow the additional steps.

2. Turn off the antivirus software

  1. Select Settings from the Start menu.
  2. Select Update & Security from the drop-down menu.
  3. Select Windows Security from the left-hand menu then clicks Open Windows Security in the right-hand window.
  4. Choose between virus and threat prevention.
  5. Choose Virus & threat protection options and disable Windows Defender protection if you don’t have a third-party antivirus installed. If you do, select Open app, which will take you to your antivirus’s menu.
  6. The button to disable the antivirus is usually found under the Security settings however, this varies with every antivirus.

Although your antivirus software protects you from infection, it might occasionally interfere with your system, resulting in the 0x8007001F problem.

It is recommended that you update your antivirus settings and disable specific capabilities to resolve the issue. If it doesn’t work, you might have to turn off your antivirus for a while.

You may have to uninstall your antivirus completely from your computer in the worst-case scenario.

Many people have claimed that Norton and McAfee might cause this problem, so if you’re running one of these programs, make sure you uninstall it.

Although these two programs are the most typical causes of this problem, other antivirus programs can also cause it, so make sure to uninstall them.

2. Remove the audio drivers from your computer

  1. Select the app from the results by pressing the Start button and typing the device manager.
  2. Right-click your audio device and select Uninstall device from the Sound, video, and game controllers menu.
  3. Remove driver software for this device if it’s available. To uninstall the driver, click the Uninstall button.

According to users, your audio drivers can cause error 0x8007001F to appear on your PC. This problem can occur if your audio drivers are outdated or faulty.

After that, you should try to download the most recent audio device drivers. Then, simply go to the manufacturer’s website and download the most recent drivers for your motherboard or sound card.

With only a few clicks, this application will download all of your PC’s Outdated drivers and assist you in resolving the problem.

3. Restart the Windows Update Service if it hasn’t already

  1. Enter services.msc by pressing Windows key + R, then press Enter or click OK.
  2. Look for Windows Update in the Services list, right-click it, and select Properties.
  3. Select Disabled as the Startup Type now.
  4. Save your changes, restart your computer, and check to see if the service is still disabled following the reboot.
  5. Start File Explorer by using the Windows key + E, then travel to C:Windows and look for the SoftwareDistribution folder.
  6. SoftwareDistribution should be the new name of the folder.
  7. ANCIENT (you can delete it, as well, but why take unnecessary risks).
  8. Start the Services app as described in steps 1 and 2 and change the Startup Type from Disabled to Manual under Properties.
  9. Go to the Start menu and select Settings from the left-hand menu.
  10. Check for updates in Update & Security.

The update service might be the source of a variety of update problems. It’s also notorious for causing excessive CPU consumption for no apparent reason on occasion.

Nonetheless, we’ll show you a remedy that can be applied to most update failures. And the one we’re dealing with right now is no exception.

Keep in mind that changing or deleting system directories will require administrative access. This approach has proven to be a viable solution for repeated update issues. However, if the problem persists, proceed to the following step.

4. Run SFC and DISM tests

4.1 Perform a quick scan with SFC

  1. To start Command Prompt with full privileges, click the Start button, type cmd, and select Run as administrator.
  2. To run the command, open Command Prompt and input the following command and press Enter:
    • sfc /scannow
  3. The SFC scan will now begin. Do not interrupt this scan since it may take up to 15 minutes.

Corrupted system files can cause error 0x8007001F to arise. We recommend scanning and repairing your files with SFC if this is the case.

File corruption is intimately linked to system update failures. In addition, some system files may become corrupted or quarantined due to malware infections.

As a result, DISM (Deployment Image Servicing and Management) can be used to scan for and fix broken files to resolve this issue, so follow the instructions below.

4.2 Carry out a DISM scan

  1. Press the Windows key, type cmd, and then choose Run as administrator from the list of options.
  2. To run the command, type it and then hit Enter:
    • DISM.exe /Online /Cleanup-image /Restorehealth
  3. Do not interrupt the scanning process, taking a few minutes.
Also See:  xfinity wifi connected but no internet access

5. Carry out a thorough boot cleaning

  1. Enter msconfig by pressing Windows key + R, then hit Enter or click OK.
  2. Select Hide all Microsoft services from the Services tab, then click the Disable all button.
  3. Click the Open Task Manager button on the Startup tab.
  4. Now, look for any programs that you don’t want to execute at startup and disable them one by one with a right-click.
  5. Return to the System Configuration window and click Apply and OK to save the changes.
  6. Restart your computer.

Third-party software, according to users, might sometimes cause your system to malfunction, resulting in this error. However, a clean boot may be all that is required to resolve the issue.

All starting apps and services will be disabled when your PC restarts, ensuring that third-party software does not interfere with the update process.

6. Make a new account for yourself

  1. Select Settings from the Start button.
  2. Navigate to the Accounts area of the Settings app after it has opened.
  3. Select Family & other individuals in the left pane, then Add someone else to this PC.
  4. Select I don’t have this person’s sign-in information from the drop-down menu.
  5. Choose to Add a user who does not have a Microsoft account.
  6. Click Next after entering the desired user name.

If you’re having trouble updating because of error 0x8007001F, the problem may be caused by a corrupted user account. However, you might be able to get around this problem by simply creating a new user account.

7. Make an on-the-fly update

  1. Install the Microsoft Update Assistant on your computer.
  2. Select Upgrade this PC now if the tools detect a new update. If you don’t, you’ll get a message. Thank you for upgrading to Windows 10’s newest version.
  3. To finish the setup, follow the on-screen prompts, being sure to accept the option to keep your files if prompted.

If you’re having trouble installing Windows updates because of error 0x8007001F, you should try an in-place upgrade. This will compel Windows 10 to update to the most recent version.

When the procedure is complete, you’ll have the most recent version of Windows installed, as well as all of your files and apps.

How can I fix the 0x8007001F update problem in Windows 11?

Although Windows 11 has a new interface and features, it still has many of the same issues as Windows 10, including the Windows Update error code 0x8007001F.

However, all of the methods given in this article are fully compatible with the new OS.

The only minor difference is that instead of downloading the Windows 11 Installation Assistant, you must download the Windows 11 Installation Assistant.

Because it isn’t an updater program, the procedure will be slightly different, but it will assist you in installing a fresh copy of Windows 11.

Your data will be fine if you want to maintain your files within the procedure. However, it’s a good idea to back up your files first for increased protection.

That should be the end of it.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions:

1. What should I do if I get a Microsoft Update error?

The Update Troubleshooter can assist you in resolving an error code that appears while downloading and installing Windows updates. To access other troubleshooters, go to Start > Settings > Update & Security > Troubleshoot > Additional troubleshooters. Select Windows Update > Run the troubleshooter from the Get up and running menu.

2. What Is Error 0x80070002 and How Do I Fix It?

  1. Check the settings for the Date and Time.
  2. Delete the Software Distribution Folder from your computer.
  3. Windows Update Troubleshooter is a good place to start.
  4. Use the Registry Editor to make changes.
  5. Bonus Suggestion

3. What is the 0x8007001F error code?

Typically, the error number 0x8007001F appears when a device has stopped responding or has had a general failure. External devices should be disconnected, and a clean boot should be performed. Then give the update a shot; it should go smoothly. Choose Start > Settings > Update & Security > Troubleshoot from the Start menu.

Also See:  Report: WhatsApp Rolling Out Voice, Video Calls to Desktop and Web

4. Windows 10 Update keeps failing – “0x8007001F – 0x20006”

Windows 10 Update keeps failing – "0x8007001F – 0x20006" from techsupport

5. Windows will not update – Reddit

Windows will not update from windows