How to: Fix Windows 10 Update Error 0x800705b3

279
How to: Fix Windows 10 Update Error 0x800705b3

Here we can see, “How to: Fix Windows 10 Update Error 0x800705b3”

It’s difficult to expect your system to run well if your drivers are ineffective. Previously, you would have installed the drivers given by the hardware manufacturer, but in Windows 10, the system update takes care of this.

The code 0x800705b3 is one of the most common errors caused by incompatible drivers. When Windows Update cannot install the appropriate software for its hardware counterparts, this error occurs. And that’s too often fertile ground for a variety of problems.

If you’ve encountered this issue and your updates have become stuck, you should see the list below, where we’ve compiled the best remedies.

Also See:  How to: Fix Windows Defender Causes Appleiedav.exe Errors

How to Fix Error 0x800705b3 in Windows 10 Update

Solution 1 – Update your drivers manually to fix Update error 0x800705b3 in Windows 10

As we’ve explained many times before, you’ll need to obtain the drivers yourself for things to work correctly. Over-the-air-updated drivers aren’t always the greatest fit for the job. Furthermore, some of the devices may be obsolete, necessitating the use of a legacy driver to get them up and running.

Follow these instructions if you’re not sure how to get valid drivers:

  1. Open the Device Manager by right-clicking the Start menu.
  2. Locate and uninstall the problematic driver.
  3. Open Properties by right-clicking the driver.
  4. Locate and copy HardwareID from the Details tab.
  5. Paste the values into your web browser’s search box to get the correct drivers.
  6. Make sure to look for the OEM’s recommended drivers.
  7. Restart the computer after installing the drivers.

It is vital to get drivers from reputable sources to avoid malware or severe harm to your computer.

Drivers are updated automatically

To avoid damaging your computer by downloading the wrong driver versions, we recommend utilizing a specialist utility to do so automatically.

Our team determined that this is the best-automated option after doing multiple testing. Our team has validated and tested this tool, and it will assist you in safely updating all old drivers. A simple tutorial on how to do it may be seen below.

You may also create driver backups and go back to where you started with your drivers if something goes wrong throughout the procedure.

As a result, using this practical tool to manage your drivers will provide an automatic search for missing or obsolete drivers, optimizing the hardware with the most recent driver versions.

Solution 2 – Run Update troubleshooter

A unified troubleshooter is one of the additions that came with the Creators Update, and it should be more valuable than the previous built-in solutions. As a result, you may go to the new unified menu and troubleshoot the problems you’re having. You can troubleshoot Updates, as well as Hardware & Devices, in this situation.

To do so, follow these steps:

  1. To open the Settings app, press Windows key + I.
  2. Security and open updates.
  3. Click Troubleshoot in the left pane.
  4. Run the Troubleshooter for Updates.
  5. Run the Hardware and Devices troubleshooter if you want to.
  6. Check for changes after restarting your computer.

However, if the problem persists, follow the actions outlined below to remedy it.

Solution 3: Disable the driver’s auto-update feature

Even if disabling some of the update features and preventing a device from updating is difficult, it is possible. To be precise, there were several. And you may find them in this article, along with detailed explanations.

Some older devices have been reported to interfere with the upgrade process, so unplug the device and delete the driver. Later on, you’ll be able to find some alternative legacy drivers to get you started. One of the few flaws of Microsoft’s recent update is that some older devices aren’t supported at all. And many people have decided to go back to Windows 7 since they have a professional requirement for an obsolete printer or scanner.

Solution 4: Perform an SFC scan

The SFC scan is another troubleshooting tool worth attempting. This is a command-line tool that checks your computer for potential problems and fixes them while you’re at it. Here’s what you’ll need to do:

  1. Open Command Prompt by right-clicking on the Start Menu button (Admin).
    • sfc/scannow
  2. Wait till the procedure is completed (it may take a while).
  3. If a solution is found, it will be applied automatically.
  4. Restart your computer after closing the Command Prompt.

Solution 5: Run DISM

DISM is the next tool we’re going to attempt. The following steps will show you how to start DISM in Windows 10:

The following steps will show you how to start DISM in Windows 10:

  1. As demonstrated above, open the Command Prompt.
  2. Press Enter after entering the following command:
    • DISM.exe /Online /Cleanup-image /Restorehealth
  3. Wait for the procedure to complete.
  4. Your computer should be restarted.
  5. If the DISM cannot acquire files from the internet, try using your installation USB or DVD. Insert the appropriate media and type the following command:
    • DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess
  6. Ensure the path “C:RepairSourceWindows” on your DVD or USB is replaced.
  7. Follow the on-screen directions for the rest of the process.
Also See:  How to: Fix Windows 10 Upgrade Error 0xc1900201

Solution 6: Reset Windows Update components

If none of the troubleshooting tools successfully resolved the issue, consider resetting critical update components. This is what you must do:

  1. As an administrator, open Command Prompt.
  2. Run the following commands in Command Prompt once it has started:
  • net stop wuauserv
  • net stop cryptSvc
  • net stop msiserver
  • ren C:WindowsSoftwareDistribution SoftwareDistribution.old
  • ren C:WindowsSystem32catroot2 Catroot2.old
  • net start wuauserv
  • net start cryptSvc
  • net start msiserver

Solution 7: Verify that the Windows Update service is up and working

The Windows Update service is essential for receiving updates in Windows 10. You won’t be able to get any updates if this service isn’t functioning correctly. As a result, make sure it’s up and running by completing the following:

  1. Open Services by going to Search and typing services.msc.
  2. The Windows Update service can be found here. Right-click and select Properties from the drop-down menu.
  3. Select Automatic from the Startup type drop-down menu on the General tab.
  4. Right-click and select Start if the service isn’t running.
  5. Close the window when you’ve confirmed your selection.

Solution 8: Verify that the BITS service is operational

The Background Intelligent Transfer Service (BITS) is a critical Updates service. It may crash and cease working on occasion for a variety of reasons. All you have to do now is restart the service and check if the Update protocol improves. Here’s how to do it:

  1. Hold down the Windows key and the R key at the same time. Type services in the search box. Enter the command msc.
  2. Double-click the Background Intelligent Transfer Service (BITS) to view its properties.
  3. Click the Start button to start the service if it isn’t already operating.
  4. Select the Recovery tab and ensure that the Restart service option is selected for both the First and Second failures.
  5. Check for updates and confirm your selection.

Solution 9: Make a DNS change

We’ll attempt changing the DNS settings if none of the other remedies cure the problem. Here’s how you can do it:

  1. Open Control Panel by typing control panel into Windows Search.
  2. Change adapter settings can be found in the left pane of Network and Sharing Center.
  3. Right-click the network you’re presently using and select Properties.
  4. Select Properties from the Internet protocol version 4 (TCP/IPv4) drop-down menu.
  5. Now make your decision. Use the DNS Server addresses listed below.
  6. Fill in the following information: Alternate DNS Server – 8.8.4.4 and DNS Server – 8.8.8.8
  7. Restart your computer after saving your modifications.

Solution 10: Reinstall everything from scratch

Finally, if all else fails and you’re still staring at the error on the screen, a clean reinstallation is a sensible course of action. Fortunately, performing a clean installation has never been easier than it is on Windows 10.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions:

1. What should I do if I get a driver update error?

  1. Drivers can be updated using the Device Manager menu. Windows 10 updates your drivers automatically as new versions are released.
  2. Reinstall the drivers if necessary.
  3. Run the Windows Troubleshooter programme.
  4. Use Windows Security to scan your computer for viruses.
  5. Windows 10 should be updated.

2. Which Windows 10 update is the source of the issue?

Microsoft’s latest ‘Patch Tuesday’ security update for Windows 10 was issued last week, but it’s causing major problems for people who install it. Users have reported a considerable decline in FPS (frames per second) and stuttering while playing games.

3. What should I do if I get an OOBE error?

Press and hold the power button until the system goes off to force a complete shutdown. Because Windows is already installed – it’s just the OOBE that hasn’t finished yet – when you turn on the device again, Windows will simply restart and ask you to adjust OOBE settings again.

Also See:  New iPad leaks just before iPhone event

4. Windows Update Error 0x800705b3 : r/techsupport – Reddit

Windows Update Error 0x800705b3 from techsupport

5. Windows 10 fails to update to 21H1. Error code 0x80070652

Windows 10 fails to update to 21H1. Error code 0x80070652 from techsupport