How to: fix screen flickering after upgrading to Fall Creators Update

0
148
How to: fix screen flickering after upgrading to Fall Creators Update

Here we can see, “How to: Fix Screen Flickering After Upgrading to Fall Creators Update”

The long-awaited Fall Creators Update for Windows 10 is nowhere, and we’ll see if it lives up to the hype. The Redstone 3 update, like its predecessor, comes with it a slew of middling improvements and a slew of bugs.

An unexpected screen flicker is one of the most sensitive issues we encounter. However, shortly after the upgrade, it appeared that the Fall Creators Update was to blame.

To help you, we’ve prepared a list of potential solutions and handpicked them for you. Consider the instructions below if your screen flickers or behaves strangely in any other way.

Also See:  Streaming Requires Additional Driver Installation

How to Fix Flickering Screen in Windows 10 Fall Creators Update 

1. Check GPU drivers

The first place to look at the GPU drivers when it comes to screen problems. Faulty or incompatible drivers are the most common cause of flickering, stuttering, resolution drops, abrupt black screens, and other unwelcomed inconveniences. And it appears that every new Windows version is causing some form of driver incompatibility issue.

As a result, your next steps are straightforward: Check your drivers, uninstall the generic driver, install the genuine driver, and enjoy the Fall Creators Update without the screen flickering. If this appears to be too much for you to handle on your own, please be sure to follow the steps below:

  1. To open the Settings app, press Windows key + I.
  2. Select Update & Security from the drop-down menu.
  3. From the left pane, choose Recovery.
  4. Select “Restart Now” from the drop-down menu.
  5. From the Windows Recovery Environment, select Troubleshoot.
  6. Select Advanced settings from the menu.
  7. Restart after selecting Startup settings.
  8. To start your computer in Safe Mode with Networking, press 5.
  9. Open Device Manager by right-clicking on the Start button.
  10. Select Display Adapters from the drop-down menu.
  11. Uninstall your GPU device by right-clicking on it.
  12. Restart your computer.

If it wasn’t enough and you’re still having problems, go to one of these websites and obtain an official driver from the manufacturer, depending on your GPU model.

Keep in mind that your PC’s drivers must all be updated for it to function properly. Therefore, we recommend updating drivers automatically with a specialized driver updater program to avoid PC harm caused by installing the improper driver versions.

This type of software will automate the entire procedure for you, searching for, updating, and downloading the correct driver version for your device, preventing irreversible PC harm.

2. Remove any third-party antivirus software

This is a last-ditch effort, but weirder things have happened on Windows 10, so it’s worth a chance. The rivalry between Windows 10 and third-party antivirus software is well-documented.

It can cause many problems, especially now that Windows Defender is usable and non-marginalized. The potential conflict could have an impact on overall performance and result in a variety of complications.

As a result, we recommend that you uninstall the antivirus and check for changes. If the annoying screen flickering persists, you may always reinstall your preferred antivirus. To get rid of the antivirus temporarily, follow the steps below:

  1. Type Control into the Windows Search bar to open the Control Panel.
  2. Select the Category view.
  3. Uninstall a software is an option.
  4. Locate your antivirus on the list, right-click it, and choose Uninstall from the menu.
  5. Restart your computer after the antivirus has been removed and look for any changes.

Additionally, specific antivirus programs are more difficult to uninstall, so you may need to boot into Safe Mode to do it.

3. Double-check the refresh rate of the display

Now, we’re still on “not likely” territory, but the latest Windows update may cause the refresh rate, as well as other system settings, to be affected.

With difficulties like this, anything is possible; therefore confirmation that the refresh rate is set to 60Hz is appreciated. It won’t take up much of your time, and it might even be beneficial.

Here’s how to do it step by step:

  1. From the contextual menu, right-click on the desktop and select Display Settings.
  2. Go to the bottom of the page and select Display adapter properties.
  3. Confirm that the Screen refresh rate is set to 60Hz under the Monitor tab.
  4. Changes should be confirmed.

4. Make a BIOS update

Switching from Windows 10 to its predecessors is usually a quick and painless process. On the other hand, BIOS can occasionally be a stumbling block and cause a slew of problems.

If you’re upgrading from Windows 7 or 8 to Windows 10 and have an older motherboard, the previous UEFI/BIOS firmware may not be enough.

As a result, the non-functional firmware that is incompatible with Windows 10 can wreak havoc on the GPU, resulting in a slew of issues that are difficult to solve.

So, you’ll need to upgrade your BIOS, which should hopefully address all of your screen troubles. But on the other hand, BIOS updates aren’t always straightforward, and they can be dangerous.

5. Restart your computer

Finally, don’t worry if none of the above-listed methods worked for you; we won’t give up just yet. As a last resort, restore options can be used. Alternatively, you can use the “Reset this PC” option, which is the most thorough in resolving issues. It works similarly to a clean reinstall, but the primary distinction is that it allows you to keep your apps and files.

If you’re unsure about your recuperation options, make sure to follow these instructions carefully:

  1. To open Settings, press Windows key + I.
  2. Select Update & Security from the drop-down menu.
  3. From the left-hand pane, choose Recovery.
  4. Click Get started under the ‘Reset this PC’ option.
  5. Choose whether you wish to keep or delete all of your files.
  6. After that, click Next, and then Reset.
  7. The operation is lengthy, but it will finally return your computer to its original settings.

This is arguably the most excellent option for consumers that updated to Windows 10 rather than reinstalling the operating system from scratch.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions:

1. How do I get rid of the display flickering?

  1. Make sure your monitor and cables are in good working order. The first thing to rule out if your screen is flashing is the hardware.
  2. Set the Refresh Rate to the Appropriate Level.
  3. Restart your computer’s display driver.
  4. Your graphics card should be reseated.
  5. Uninstall any applications that are causing you problems.
  6. Make a new user profile in Windows.

2. Is it possible for BIOS to create flickering?

The evidence leads to the hardware if the display panel flickers in the BIOS. It can happen in Windows because of the drivers. The drivers, on the other hand, are not involved in BIOS.

3. Stuttering and screen tearing in games after Windows 10 Fall

Stuttering and screen tearing in games after Windows 10 Fall Creators Update from Windows10

Also See:  Chrome Is Causing Bsod Errors on Windows 10

4. Screen flashing after optional windows 10 update : r/techsupport

Screen flashing after optional windows 10 update from techsupport

5. After I dropped it, why is my screen flickering?

Solution: If the phone display flickers after it has been dropped, it is likely that the display has been damaged. However, you should check if the problem is caused by a software flaw by returning your phone to factory settings and then setting it up as a new device.