Here we can see, “How to Fix Nvidia Driver Error Code 37 for Good”
The two most common causes of driver errors are hardware issues and new installations, but they can also be brought on by corrupted drivers and other issues with system resources.
If you have NVIDIA driver error 37, it could be because of a short-term hardware issue or a modification you made to your computer’s device management.
This article examines some of the fixes available to assist in fixing this problem.
FIX: NVidia driver error code 37
Solution 1: Restart your computer
Restarting your computer is sometimes the best approach to solving problems for which you may not have solutions. Try the next method if this doesn’t resolve the NVIDIA driver error number 37 on your PC.
Solution 2: Run the Hardware and Devices troubleshooter
The Hardware and Devices troubleshooter ensures that any new hardware or device is installed successfully on your computer and looks for any frequently occurring problems.
How to do it is as follows:
-
- Just click Launch and choose Control Panel
- In the top right corner, select View by.
- Large icons can be chosen by clicking the drop-down arrow.
- To troubleshoot, click.
- Click Sound and Hardware.
- To configure a device, click.
- To launch the troubleshooter, click Next.
Run the Hardware and Devices troubleshooter by following the instructions. Any problems that could be producing NVIDIA driver error code 37 will be found by the troubleshooter.
Solution 3: Revert the driver by selecting Device Manager by right-clicking Start.
-
- Click to enlarge the list after selecting Sound, Video, and Game Controllers, then pick the NVIDIA card.
- Select Properties by doing right-click on the NVIDIA card.
- Select the Driver tab in Properties.
- Choose Roll Back Driver, then adhere to the instructions.
The absence of the button indicates that there is no driver to roll back to.
Visit the website of your computer maker to obtain the most recent driver if Windows cannot locate a new driver for your NVIDIA card.
If no driver updates are available, select Uninstall from the context menu of the graphics card driver, then restart your computer.
Solution 4 – Update drivers
4.1. Update drivers from Windows Update
-
- Start by choosing Settings.
- Windows Update can be found under Update & Security.
- To check for updates, click.
4.2. Update drivers from manufacturer’s website
Visit the NVIDIA manufacturer website, look for the most recent Windows 10 drivers, and install them according to the website’s instructions.
From the manufacturer’s website, update drivers as follows:
-
- Right-click Start
- the Device Manager option
- Expand the option for game controllers, sound, and video
- Select “right-click” on the NVIDIA card.
- To update the driver software, click.
- your computer, restart it
4.3. Update drivers automatically
It is crucial to note that installing the incorrect driver versions when manually updating and downloading drivers can permanently harm your system. Therefore, we strongly advise doing it automatically with the aid of an automatic tool to stop that from happening in the first place.
Solution 5: Uninstall and reinstall NVIDIA driver
Before updating to updated drivers or swapping out an old NVIDIA card for a new one, driver files should be removed. How to remove NVIDIA drivers from your computer are as follows:
-
- Right-click Start
- Choosing Control Panel
- the Add/Remove Programs icon twice
- the appropriate NVIDIA Windows display drivers
- select the Add/Remove or Change/Remove buttons.
- Verify that you want to carry out the uninstallation.
- A dialogue will ask you if you want to remove all saved nView profiles. All saved profiles and nView software will be deleted if you choose Yes. The profile data are saved in the WindowsnView directory on your hard drive, even if clicking No would delete the nView software.
- Restart your computer to finish the removal of driver files once they have been removed.
- Reinstall the NVIDIA driver after turning on your machine.
Solution 6: Perform a System Restore
Use System Restore to create restore points using the instructions below if your computer’s Windows 10 browser isn’t working, and see if it helps:
-
- Select “Start”
- Enter “System Restore” in the search bar.
- In the list of search results, select System Restore.
- If prompted, enter the password for your administrator account or give access.
- Click in the System Restore dialogue box. Alternately select a restoration point.
- Select Next
- Select a restore point that was made before the issue occurred.
- Next, select Finish.
Your personal files are unaffected by restoration. However, it also removes software, drivers, and updates installed after the restore point was made.
Do the following to return to a restore point:
-
- Right-click Start and choose Control Panel.
- Type Recovery Select Recovery into the control panel’s search box.
- the Open System Restore button
- Select Next
- Select the restore point for the malfunctioning driver, update, or program.
- Next, select Finish.
Solution 7: Boot in Safe Mode with Networking
The network drivers and services you need to access the internet, or other computers on the same network are launched in safe mode when Windows is started in safe mode with networking.
To enter safe mode with networking, adhere to the following steps:
-
- your computer, restart it
- Hold down the SHIFT key while you choose Power, then Restart after the sign-in screen appears.
- Select Troubleshoot on the Choose an option screen after the machine restarts.
- Choose the advanced options.
- Toggle Startup Settings
- Select “Restart”
- You’ll get a menu of choices after it resumes. For Safe Mode with Networking, press 5 or F5.
After entering safe mode, you can run a System File Checker (SFC) scan.
How to run an SFC scan
A System File Checker scan examines all protected system files, and the flawed versions are subsequently swapped out with the true, accurate Microsoft versions.
How to do it is as follows:
-
- Select “Start”
- CMD should be entered in the search bar.
- Run as Administrator from the context menu when you right-click Command Prompt
- key in sfc/scannow
- Enter the key
- your computer, restart it
To leave Safe Mode, perform these steps:
-
- Right-click the Start button.
- msconfig as the Run Type
- A window will pop up.
- Activate the Boot tab.
- Uncheck or deselect the Safe Boot option box.
- your computer, restart it
Solution 8: Replace hardware
If none of those mentioned above fixes worked, you might need to get a new NVIDIA card since it has problem number 37. If you have newer hardware running an outdated OS, it’s also possible that your device is incompatible with it, leading to error 37.
Conclusion
I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.
User Questions
1. Does my graphics card have a problem?
There’s a significant possibility it’s your graphics card if you experience stuttering along with other red flags. Screen flaws: Your graphics card may be failing if you suddenly see tearing or strange colors appearing all over the screen when playing a game or viewing a movie.
2. Why won’t my NVIDIA driver run?
Cleanly install a stable NVIDIA driver. You might need to use Display Driver Uninstaller to resolve the problem if you’ve already tried a clean install of the drivers (removing all NVIDIA Software and then reinstalling it).
3. Can I safely remove the Nvidia graphics driver?
The method may leave certain leftover files and folders that might still cause issues; therefore it is typically not advised to remove GPU drivers exclusively through the operating system.
4. PSA for the new Xbox One controller drivers. How to fix error …
PSA for the new Xbox One controller drivers. How to fix error 37 for Windows 7. from pcgaming
5. Can’t install a wired controller. “Windows cannot initialize the …
Can’t install a wired controller. "Windows cannot initialize the device driver for this hardware (Code 37)." from pcgamingtechsupport
