cat6 network cable

cat6 network cable

Here we can see, “cat6 network cable”

Category 6

The mainstream adoption of Gigabit Ethernet (1000BASE-T) required a replacement industry-standard cable. The cable needed to be capable of transmitting at a better frequency of 250 MHz. As a result, cable manufacturers introduced CAT6. The CAT6 cable uses a thicker-gauge wire and has an increased shielding. Also, the wires have more twists per inch. These improvements helped to scale back signal loss and interference. The tighter specifications guaranteed that 100-meter runs using CAT6 cable are capable of 1000 Mbit/s transfer speeds. Also, CAT6 cable can reach 10-Gigabit Ethernet speeds by reducing the length too but 50 meters.


1.Speed and Performance

The cable can handle speed performance of up to 250 MHZ. This fast performance makes it possible to use it with a quick ethernet network, including Gigabit Ethernet and 10-Gigabit Ethernet. the entire generation of the Cat 6 cable was introduced to enrich the Gigabit Ethernet, which incorporates interface cards, patch panels, routers, switches, and other components developed to realize a full gigabit network. As a result, many IT professionals realized that the Cat 6 cable provides in no time network performance and may deliver gigabit speeds.

2.Similar Structure with Cat 5 Cable

Cat 6 cable features a similar structure to Cat 5 and Cat 5e. The Cat 6, Cat 5, and Cat 5e cables have eight wires twisted together to make four pairs. The difference is that one pair of the wires within the Cat 6 cable is kept from contact with others to produce double the bandwidth of Cat 5 and Cat 5e.

Also See:  cat6 vs cat7

3.Backward Compatible

The plug and port of the Cat 6 cable are equivalent because of the Cat 5 and Cat 5e. Therefore, they are often plugged into any port or connection that supports both of these cables. If you employ the Cat 5 port, it’ll not yield the complete speed that it’s capable of handling. Instead, it’ll operate at the speed of the pc or cable. However, the speed is going to be acceptable.


If upgrading to a more optimal network, the Cat 6 cable should be included in the upgrade parts. The Cat 6 cable won’t operate at the complete speed if other units within the network don’t support gigabit speeds. Starting small businesses should consider installing the Cat 6 cable since it’s becoming the industry standard.



The Cat 6 cable is far costlier than the Cat 5e cable. If the cable doesn’t show noticeable improvement in your network, it’s not well worth the investment. In most cases, it’s more sensible to use Cat 5e because it’s more economical while still offering a good performance. The Cat 5e cable is additionally available in several colors.

2.doesn’t Guarantee Full Speed

Users often misunderstand that purchasing a Cat 6 cable will offer them the whole gigabit network. In truth, the Cat 6 cable will only yield the complete speed if every single component within the network can work on gigabit speed. If one among the components isn’t gigabit rated, your network will operate at the slowest device’s speed.

Most of the time, the typical user could also be persuaded to get the Cat 6 cable without truly knowing if it’ll make an impression on their network. Therefore, do your research before making a choice.

Also See:  cat6a

Limitations of Cat 6

As with all other sorts of twisted pair EIA/TIA cabling, individual Cat 6 cable runs are limited to a maximum recommended length of 328 feet for nominal connection speeds. In addition, cat 6 cabling supports 10 Gigabit Ethernet connections, but not at this full distance.

Cat6 Network Cable Specifications

 Category 6 / cat6
Applicable for Phone YES
Applicable for Office Network YES
Applcable for Home Network YES
Applicable for Data Center NO
Potential Bandwidth (per sec) 1Gb
Time to transfer 1 Terabyte 3 hours
Data Transmission 1000 BASE-TX
Connector Type RJ45 8P8C (for CAT6)
Frequency Range Minimum 0 - 250 MHz
Frequency Maximum 500 MHz
Performance Distance 328 Feet
Alt. Distance 10Gb 180ft

User Questions:

1.Does Cat 6 support 1gbps?

Like CAT5e, CAT6 cables support Gigabit Ethernet segments up to 100 m, but they also leave use in 10-Gigabit networks over a limited distance.

2.Is CAT6A faster than Cat6?

As well as having the ability to support 1 Gbps network speeds, CAT6 also supports higher data rates of 10Gbps. However, 10Gbps is merely supported over shorter distances of 37-55 meters. CAT6A is capable of supporting data transfer rates of up to 10Gbps at a maximum bandwidth of 500MHz.

Also See:  cat5e cable speed

3.What is the max distance for Cat6?

100 meters

Maximum length

When used for 10/100/1000BASE-T, the utmost allowed length of a Cat 6 cable is 100 meters (328 ft). This consists of 90 meters (295 ft) of solid “horizontal” cabling between the patch panel and therefore the wall jack, plus 5 meters (16 ft) of stranded patch cable between each jack and therefore the attached device.

4.Cat6 cable recommendation?

Cat6 cable recommendation? from HomeNetworking

5.CAT 6 Ethernet not making a difference

CAT 6 Ethernet not making a difference from HomeNetworking