Black Screen at Startup in Windows Vista, 7

Here we can see “Black Screen at Startup in Windows Vista, 7.”

The faulty black screen that shows at startup on Windows Vista and Windows 7 can be fixed.

Symptoms and description

This mistake is linked to the error messages, alerts, warnings, and symptoms listed below.

Symptom 1: A black screen displays when the computer starts up.

Windows 7 may display a completely black screen when you first turn on your computer. There could be several reasons for this, including a visual adapter malfunction, recent driver changes, or new Windows updates.

Regardless of whether your computer is a desktop or a laptop, this error will show. This problem was reported by several users with HP laptops and computers running Windows 7 following a recent Windows update.

This Error’s Causes

One of the following causes has been identified as a possible cause of this error:

Cause 1: System files have been corrupted

Disk write failures, power outages, and virus infections can harm the file system on a hard drive. If this is the case, the operating system cannot locate the necessary system files, and the loading process is interrupted.

Cause 2: An old driver has been installed

Another source of this problem could be an out-of-date driver. This can happen due to a Windows upgrade/downgrade or a failed Windows Update.

On Windows, How to fix the “Black screen that appears upon startup.”

Fix 1: Use Easy Recovery Essentials

Easy Recovery Essentials’ built-in Automated Repair feature can automatically fix numerous issues like these. EasyRE can be downloaded and produced on any PC and is presently available for Windows XP, Vista, 7, and 8.

1. Easy Recovery Essentials is a free download. Before you download EasyRE, note your Windows version (XP, Vista, 7, or 8).
2. The image should be burned.
3. Start your computer with the Easy Recovery Essentials CD or USB you made.
4. After EasyRE has started, select “Automated Repair” and click Continue.
5. After EasyRE has finished scanning your computer’s discs, find and pick the drive letter for your Windows installation from the list, and then click the Automated Repair option to start the repair process.
6. Easy Recovery Essentials will begin looking for faults on the selected drive. EasyRE will scan the disc, partition, bootsector, filesystem, bootloader, and registry for faults and rectify them automatically. EasyRE’s repair is automated; thus, no interaction is required.
7. EasyRE will provide its findings after the process is completed. To reboot your PC and test the changes, click the Restart option.
8. The “black screen that shows at startup” error should be gone as your computer starts up.

Fix 2: Restart the computer in Safe Mode

You can repair it by booting into the Last Known Good Configuration.

To enter the Last Known Good Configuration mode, follow these steps:

1. Restart your computer
2. Keep pressing F8 until you get a list of boot options.
3. Select the most recent good configuration (Advanced).
4. Wait for the computer to boot up after pressing Enter.

Fix 3: Restart your computer in Safe Mode and update your driver software

After restarting your computer, go into Windows Safe Mode by pressing F8 repeatedly. Follow these procedures after selecting “Safe Mode” from the Options menu:

1. By right-clicking on the taskbar, you may access the Start Task Manager.
2. Go to this Manager’s Processes tab.
3. To terminate explorer.exe, locate it and click End Process.
4. Then go to File and select New Task (Run).
5. In the Open box, type explorer.exe and then press the OK button.
6. Enter device manager by pressing the Start Button.
7. When the search results display, select Device Manager.
8. Double-click on the Display adapter and then right-click on your display device at this point.
9. Select Update Driver Software from the drop-down menu.
10. Follow the Drive Software Wizard’s instructions.

Fix 4: Use a recovery disc to access System Restore

This solution approach will only work if your Windows 7 computer has System Restore turned on. To use System Restore from an installation CD, follow these steps:

1. Place the Windows 7 installation DVD in the drive.
2. When the message “Press any key to boot from CD or DVD” comes on your screen, press a key.
3. After selecting a language, time, and typing technique, click Repair your machine.
4. Click Next after selecting the drive where Windows was installed (typically C:\).
5. From the System Recovery Options box, choose System Restore.
6. To choose a restore point, follow the System Restore instructions.
7. By selecting Finish, you can restore your computer.

Fix 5: Run Startup Repair

1. Place your Windows installation CD in the drive.
2. When you see “Press any key to boot from CD or DVD,” press any key.
3. After you’ve chosen your language, time, and typing method, click Repair your computer.
4. Click Next after selecting your Windows installation drive. C:\ is usually the default drive.
5. Wait for the process to complete after selecting Startup Repair.

Conclusion

I hope this information was helpful. If you have anything to add, please do so in the comments.

User Questions:

1. How do I get rid of the dark startup screen?

• Examine Windows for Responsiveness.
• Make sure your monitor and cables are in good working order.
• Disconnect all external devices.
• Change the projection settings as necessary.
• Display Drivers should be reinstalled.
• Ensure that the inside of your computer case is clean.
• Take a look at your internal hardware.

2. What is the best way to fix Windows Vista starting issues?

• Restart the computer after inserting the DVD.
• To boot from the DVD, press any key.
• Select a keyboard layout.
• On the Install now page, select Repair your machine.
• Select Troubleshoot from the drop-down menu.
• Select Advanced settings from the menu.
• Select Startup Settings from the menu.
• Press the Restart button.

3. How can I get rid of the black screen in Windows 7?

• Start by going to the Start Menu.
• Look up “cmd” in the dictionary.
• Right-click on cmd in the search results and select Run as administrator.
• slmgr -rearm slmgr -rearm slmgr -rearm slmgr -rearm slmgr -rearm slmgr -rearm -re
• A confirmation box will appear.

4. What should I do if my computer’s screen goes black?

• Start the program.
• To open the System Configuration program, search for msconfig and click the top result.
• Select the Services tab from the menu bar.
• Select Hide all Microsoft services from the drop-down menu.
• Take a look at one of the services.
• Then press the Apply button.
• Then press the OK button.
• Restart the computer if necessary.

5. All other windows turn into black screen when I open up a game. Any fixes?

All other windows turn into black screen when I open up a game. Any fixes? from windows