Here we can see “How to: Fix 0x00000003 Stop Error”
- The 0x00000003 halt error is just one of numerous Blue Screen of Death problems.
- Others may follow this code on the same blue screen, but the underlying cause remains the same.
- Hardware failure or outdated drivers are the most common causes.
- The most straightforward approach to resolve this is running a broad BSoD troubleshooter to eliminate all bugs.
Due to hardware failure or driver difficulties, your Windows PC may crash with the 0x00000003 stop error. When playing games or surfing the web, the blue screen of death can appear.
This problem has been reported by several users in the Microsoft community forum.
Hello. I’ve been having trouble with a Blue Screen Error past few days. The code is as follows:
STOP 0X00000F4 0X00000003 0XFFFFFA800A502370 0XFFFFFA800A502650 0XFF80000338E460
Memory Dump Failure 0xC0000010 0XFFFFFA800A502650 0XFFFFFA800A502650 0XFFFFFA800A502650 0xC0000010
Try restarting your computer to resolve the problem. If the problem persists, see the article below for troubleshooting advice on fixing the 0x00000003 stop error in Windows.
What is the solution to the 0x00000003 halt error?
1. Restart the computer in Safe Mode
- To open Run, press Windows key + R.
- Click OK after typing msconfig.msc.
- Open the Boot tab in the System Configuration window.
- Under Boot settings, check the Safe Mode box.
- To save the changes, click Apply and OK.
- When requested to restart the system in safe mode, select Yes.
Alternatively, you can use Advanced Options to enter Safe Mode.
- Press Windows Key + I at the same time.
- Select Update & Security from the drop-down menu.
- Navigate to the Recovery tab.
- Advanced Startup can be found by scrolling down.
- Restart your computer by using the Restart now option.
- Select Troubleshoot > Advanced Options > Startup Options from the drop-down menu.
- Restart the computer by pressing the Restart button.
- The Startup Settings menu will appear after the restart.
- To launch Windows in Safe Mode, press the F4 key.
Check if the 0x00000003 halt problem occurs again after booting into Safe Mode. If the error does not appear, third-party software or hardware may be blamed.
To see if uninstalling the most recently installed programs helps you resolve the error, try it. To exit Safe Mode, restart the computer.
2. Use a BSoD troubleshooter to figure out what’s wrong
The most straightforward approach to deal with such issues is to use a BSoD troubleshooter, especially if you’re not sure what’s causing them. Such a program will scan your system and securely correct all of the bugs. You do not need to take any action.
It’s possible that you’ll have to perform this in Safe Mode as well.
3. Device driver for rollback
- To do so, hold down the Windows key and the R key simultaneously.
- To open Device Manager, type devmgmt.msc and click OK.
- Expand the device category for which you wish to roll back the driver in Device Manager.
- Select Properties from the device’s right-click menu.
- Navigate to the Driver tab.
- To go back in time, press the Roll Back Driver button. To confirm, click Yes.
- Windows will now uninstall the selected device’s driver and reinstall the previously installed driver.
If the error is caused by a recently installed device driver, rolling back the device driver may help you resolve the problem. To identify the peripheral generating the issue, try detaching and rejoining all external devices attached to your computer.
4. Check for and install Windows updates
- Select Settings from the Start menu.
- Select Update and Security from the drop-down menu.
- To check for updates now, click the Check for updates now button.
- All pending Windows updates should be downloaded and installed.
The most recent version of Windows might assist you in resolving the blue screen of death concerns. Updated Windows and third-party drivers are included in the newer editions.
5. Run a complete virus scan
- Open Settings by clicking Start.
- Choose Update and Security from the drop-down menu.
- Click Windows Security from the menu.
- Select Virus and Threat Protection from the drop-down menu.
- Click Scan Options from the drop-down menu.
- After that, select Full Scan and then Scan Now.
- The system will now be scanned for viruses and other harmful software that may be causing the issue.
You may also do a comprehensive scan and remove malware and adware from your system using third-party antivirus software.
6. Make use of the System Restore Point
- Type Restore Point while holding down the Windows key.
- Select the option to Create a Restore Point.
- Select System Restore from the System Properties window.
- Check the box that says “Show more restore points.”
- Click Next after selecting the most recently created restore point.
- After reading the description, click Finish.
The repair process may take some time. If successful, your machine will be restored to its previous state before to the described event.
7. Update the firmware on the SSD
- Check the manufacturer’s website for updates if you’re utilizing an SSD for storage.
- Clean your system for dust and reinstall the SSD disks, RAM stick, and GPU if necessary.
- Make sure you have the most recent BIOS version installed as well.
The 0x00000003 halt error in Windows 10 is just another blue screen of death problem that can arise for various reasons. The most popular solutions for fixing this problem on your computer are provided below.
I hope you found this information helpful. Please fill out the form below if you have any questions or comments.
1. What should I do if I get a Microsoft error?
- Check to see if your device has enough storage.
- Run Windows Update a couple times to make sure it’s up to current.
- Check for updates to third-party drivers and download them.
- Remove any unnecessary hardware.
- Look for faults in Device Manager.
- Remove any security software that was installed by a third party.
- Errors on the hard drive can be repaired.
- Restart Windows from the beginning.
2. Error file exists is caused by a number of factors.
A missing or corrupt file, or, in certain situations, a malware infestation, are the main causes of ERROR FILE EXISTS executable errors in Android 6.0. 1. After the problematic file has been changed, a registry scan can be used to remove any invalid Android 6.0 files.
3. Is it possible to fix a blue screen of death?
In my experience, at least 90% of BSODs can be resolved with this information alone. That’s because it’s usually fixed by disconnecting, disabling, or uninstalling associated devices, drivers, apps, or updates, as Microsoft suggests and as I outlined in the preceding section.
4. Error code 0x00000001 : r/XboxGamePassPC – Reddit
5. 0xc0000001 error on my pc, it doesnt wanna startup, help