How to: Fix Windows needs the TAP-Win32 adapter name

Here we can see, “How to: Fix Windows needs the TAP-Win32 adapter name”

• You may have many OpenVPN adapters installed if you get the Windows needs the TAP-Win32 adapter name problem on your PC.
• Learn how to get rid of this error notice and connect to a secure tunnel with OpenVPN.

Windows requires In OpenVPN files, and the TAP-Win32 adapter name error appears (ovpn format). When Windows tries to connect to the secure tunnel, it generates this error.

The whole error message is as follows:

. # Windows needs the TAP-Win32 adapter name

. # from the Network Connections panel

. # if you have more than one

This error message may prevent you from successfully using a virtual private network solution if you are unfamiliar with how VPNs and OpenVPN work.

How can I fix the Windows needs the TAP-Win32 adapter name error?

1. Rename the OpenVPN TAP adapters

You can skip this step if you have one TAP-Win32 adapter for OpenVPN.

When constructing a secure tunnel, you must inform Windows which interface to use if there are two or more.

Keep in mind that the following tasks require admin rights:

1. 1. Right-click the Start button in Windows 10 and select Network Connections.
   2. Click Alter the adapter settings.
   3. Right-click the OpenVPN-associated TAP-Win32 adapter interface.
   4. Please give it a different name (bearing in mind that case matters).
   5. Carry out this procedure for each TAP-Win32 adapter interface connected to OpenVPN.
   6. Open the OVPN document.
   7. Set the new TAP-Win32 adapter name on the dev-node line.
   8. Save your modifications and attempt reconnecting.

It shows that you have two or more TAP-Win32 adapters for OpenVPN installed, and you must choose which one to use.

2. Reinstall the OpenVPN network adapter

If you only have one, it’s good to reinstall the TAP-Win32 adapter for OpenVPN.

This is what you must do:

1. 1. Select Device Manager from the Start menu by right-clicking the Start button.
   2. Expand the section Network Adapters.
   3. Locate the OpenVPN adapter and right-click it.
   4. Uninstall the gadget
   5. Select Scan for Hardware Changes from the Action menu.
   6. Attempt to reconnect using OpenVPN.

3. Use a commercial VPN with OpenVPN support

Consider utilizing a commercial VPN like Private Internet Access instead of the OpenVPN client because it automatically resolves any OpenVPN configuration difficulties.

If you have any problems, you can easily switch VPN servers and reinstall the OpenVPN adapter from the Help menu.

Private DNS servers, static and dynamic IP addresses, split tunnelling mode, kill switch, and native port forwarding are all included with PIA.

More information on PIA:

• • Windows, Mac, iOS, Android, Linux, and routers are all supported.
  • At the same time, protect up to ten devices.
  • A policy of no data logging
  • 24/7 live chat assistance
  • Money-back guarantee for 30 days (no free trial)

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions

1. How do I get the tap Windows adaptor to work?

Open the Control Panel, go to Network and Internet, then Network and Sharing Center. Alter the adapter’s settings. To find the Tap-Windows Adapter, look through the network adapter descriptions. Disable it by right-clicking on it. Right-click once more > Enable.

2. What exactly is a Windows tap adapter?

VPN services employ the TAP-Windows Adapter as a network driver to connect to servers. This indicates that it’s a required component for most VPN clients (ExpressVPN, NordVPN, CyberGhost, and so on).

3. What should I do if my tap adapter is missing or disabled?

Adapters > Control Panel > Network and Sharing Center Find the one with’ TAP-Win32 Adapter V9′ and the name ‘Local Area Connection XX or Ethernet XX (XX designating a number). If it’s turned off, right-click it and select Enable.

4. Multiple TAP-Win32 Adapter OAS. : r/techsupport – Reddit

Multiple TAP-Win32 Adapter OAS. from techsupport

5. TAP-Win32 Adapter OAS keeps reappearing : techsupport – Reddit

TAP-Win32 Adapter OAS keeps reappearing from techsupport