Unexpected Store Exception Windows 10

Here we can see “Unexpected Store Exception Windows 10”

How to Fix an Unexpected Store Exception Error in Windows 10

Ran into an “Unexpected Store Exception” error in Windows 10? find out how to diagnose and fix the difficulty.

Getting a blue screen of death (also referred to as a stop code error), where your system unexpectedly crashes, is frustrating. Especially once you don’t understand the matter, however, if you encounter the Windows 10 Unexpected Store Exception error, we will help.

Despite what you would think, this error has nothing to try with the Microsoft Store. Instead, we’re getting to show you various ways to troubleshoot this error to work out the explanation for an Unexpected Store Exception in Windows 10.

1. Check the Health of Your Hard Drive

The error often indicates that you’re employing a failing disk drive. It is easy to see this with a free program like CrystalDiskInfo. Download the quality edition, run the installer, and open the program.

The tabs at the highest allow you to change between drives if you’ve got multiple. Next, check out the Health Status, which is being determined from the values listed within the table beneath.

Good means exactly that and shows your drive is in fine health. Bad or Caution is negative.

If you see either Bad or Caution status, then you would like to exchange the drive as soon as possible because it’s in danger of failing imminently. Albeit you see Good, it’s worth switching the drive if you’ve got a spare—the favorite explanation for the Unexpected Store Exception stop code may be a faulty disk drive. If the error stops appearing with a special drive, you’ve found the matter.

Check the Rest of Your Hardware

If your disk drive is ok, it’s worth checking the remainder of your hardware for faults. That’s because the Unexpected Store Exception error is most ordinarily caused by faulty hardware. So, for example, your CPU, GPU, or RAM might be throwing the error.

Windows has two built-in tools to help: Performance Monitor and Windows Memory Diagnostic. For assistance on using these, alongside third-party hardware diagnostic apps, please read our guide on the way to test your PC for failing hardware.

2. Update Your Display Driver

Display drivers causing incompatibility issues also can trigger this error. So it’s worth ensuring they’re updated.

To begin, boot your system into safe mode. Then, inspect our guide booting Windows 10 in safe mode if you would like a hand.

Then follow these instructions to reinstall your display driver:

1. Press Windows Key + X and click on Device Manager.
2. Double-click on Display adapters. This may display your graphics card. Right-click the result and click on Uninstall device. Confirm it and restart your PC.
3. Press Windows Key + I to open Settings and click on Update & Security.
4. Click Check for updates. Windows should automatically find the newest driver and update your system.

If that does not work, attend your graphics card manufacturer’s website to download the drivers, following its instructions. Also, see our guide to replacing outdated Windows drivers for more information on downloading and updating drivers.

3. Run System File Checker

Faulty system files could also cause the Unexpected Store Exception error. Handily, Windows includes a simple way for you to scan your system and automatically plan to repair any problematic files.

1. Press Windows Key + X.
2. Click prompt (Admin).
3. Once opened, type sfc /scannow and press Enter.

This will initiate the scan. It’ll display a message once completed. For example, it’d “not find any integrity violations”, which suggests all is ok. Alternatively, it’d say:

• Windows Resource Protection found corrupt files and successfully repaired them. Details are included within the CBS.Log %WinDir%\Logs\CBS\CBS.log
• Windows Resource Protection found corrupt files but was unable to repair a number of them. Details are included within the CBS.Log %WinDir%\Logs\CBS\CBS.log

If so, input the subsequent in prompt to look at that log:

findstr /c:”[SR]” %windir%\Logs\CBS\CBS.log >”%userprofile%\Desktop

fclogs.txt”

This will output the log to your desktop, where you’ll review the problematic files. If the errors cannot be fixed, as per the second message listed above, you’ll want to think about a factory reset of Windows to urge fresh copies of system files.

4. Disable Your Antivirus

Your antivirus software might be interfering together with your system and causing the error. First, try temporarily disabling your antivirus and see if the error still occurs. the way to disable it’ll vary, counting on your software, but the likelihood is that it’ll be somewhere within the program’s settings.

If you’re using Windows Defender, disable it like so:

1. Press Windows key + I to open Settings.
2. Go to Update & Security > Windows Security > Virus & threat protection.
3. Beneath Virus & threat protection settings, click Manage settings.
4. Slide Real-time protection to Off.

Alternatively, if using any third-party antivirus software, you’ll try uninstalling it entirely. Press Windows Key + I to open Settings and attend Apps. Find your antivirus on the list, click it, then click Uninstall.

Of course, it isn’t the simplest practice to go away your system unprotected. If this does not fix the Unexpected Store Exception error, enable your antivirus to keep your computer secure.

5. Turn Off Fast Startup

The fast startup may be a feature that’s enabled by default up-to-date Windows 10 systems. With this, your computer uses a kind of hibernation to offer you quicker boot speeds, especially on hard disc drives.

While great, it can cause some drivers to not load properly, resulting in the Unexpected Store Exception error. As such, it’s worth disabling fast startup to ascertain if it gets to prevent the error.

1. Press Windows key + R to open Settings.
2. Click System > Power & sleep.
3. Beneath Related settings, click Additional power settings.
4. Click Choose what the facility buttons do.
5. You may get to click Change settings that are currently unavailable.
6. Uncheck activate fast startup (recommended).
7. Click Save changes.

Unexpected Store Exception Is Commonly Caused by Hardware

Hopefully, the steps above have helped you troubleshoot or solve the difficulty. Most ordinarily, the culprit for the Windows 10 Unexpected Store Exception blue screen error is faulty hardware. If not, the opposite steps mentioned are worth perusing.

A blue screen of death is often caused by many things but is especially common if you’ve changed something on your system recently.

User Questions:

1. the way to fix unexpected store exception error message

I, too, am experiencing this same error on my HP Pavilion G6 notebook.

The notebook came with Windows 7, and that I updated it to windows 8 from the Microsoft website for college. Once I got the notification to upgrade to windows 10 I did so, and now I’m getting this error. I even have browsed everywhere the web for an answer and may not seem to seek out anything.

I get this boot message when beginning my computer, but the pc boots up just fine after it restarts.

2. Bug Check 0x154: UNEXPECTED_STORE_EXCEPTION

The UNEXPECTED_STORE_EXCEPTION bug check features a value of 0x00000154. This means that the kernel memory store component caught an unexpected exception.

3. Help with Windows 10 UNEXPECTED STORE EXCEPTION BSODHi, 

I have been getting the UNEXPECTED_STORE_EXCEPTION BSOD very often once I use my laptop, mostly during video playbacks. I even have done a system file check, memtest, and chkdsk, the issue persists. Would appreciate it if someone can help me analyze the dump file! 

4. Unexpected Store Exception

I have a 14-month-old Dell XPS that crashes with the blue screen of death over the past few months, stating – ‘Unexpected Store Exception. I even have noticed that this only happens when using Microsoft Edge.

Having spoken to Dell support, and after a series of tests, the hardware is functioning how it should. However, as this is often past the initial 12-month support stage from purchase, which I don’t have extended support, they’re posing for a considerable fee to seem into the matter any longer and specifically watching software diagnostics.

After reading on forums, a suggestion is to reset the pc and reinstall Windows 10. However, this fails whenever. 

I have also read that McAfee LiveSafe might be a contributing factor to the initial problem, which I’m running – could this be true? 

5. BSOD – Unexpected Store Exception

A month approximately ago, I continuously got the Unexpected Store Exception BSOD. After the crash, upon restarting, I might be unable to access my D drive (an HDD) until another pack up and restart. However, no files were ever corrupted on my D drive. After trying multiple things and failing to repair it myself, I sent it in to a tech shop.

They examined all the hardware and told me there is no issue physically with my laptop. Once they wiped my C drive (SSD) and reinstalled Windows 10 thereon, it appeared to be working.

All was fine for a few months, but I noticed tons more lag over the last 2 days, where I can hear a noise from my disk drive, and everything on my laptop seizes for a second or 2. I observed this equivalent thing with my initial problem, so I used to be unsurprised when it crashed again with an equivalent issue as before.

Because it worked fine for so long, I’m assuming something updated on my SSD is causing the BSOD since it only started showing issues a few days ago. the foremost recent update was a Windows Defender update, so I’ve disabled that and downloaded a special antivirus software instead. I’m noticing fewer issues and fewer sounds but still getting minor lag which I’m assuming remains associated with the difficulty since it wasn’t lagging before.

I was ready to access the Minidump file from yesterday’s crash and put it into the Windows debugger, the output of which I’ve posted here:

https://1drv.ms/w/s!ApNnjOj3Q-yWg5NHuEFS1OQCXqwneQ?e=4SqALR

I’m unsure how to interpret the results, and that I hoped someone would be ready to tell me what the difficulty was. I’m hoping I’ve fixed the difficulty by disabling Windows Defender, considering I’ve run both chkdsk on my C: and D: and therefore, the memory diagnostic tool and zip were wrong. I’ve also used CrystalDiskInfo to seem at both drives, and it says both are good.