How to: Fix Windows 10 Won’t Shut Down

306
How to: Fix Windows 10 Won’t Shut Down

Here we can see, “How to: Fix Windows 10 Won’t Shut Down”

  • If Windows 10 isn’t completely shutting down, it could be a driver issue.
  • The Intel(R) Management Engine Interface driver could potentially be blamed. It is recommended that you update the drivers for this device to the most recent version to resolve this issue.
  • Many Microsoft Windows customers have experienced difficulties shutting off their PCs.
  • These issues began after upgrading to Windows 10 and even after a new, clean installation of the same operating system.

How can I get Windows 10 to shut down or restart instead of shutting down?

Sometimes Windows 10 does not shut down properly, which can be a significant issue; however, you can resolve this issue by doing the following steps:

  • Windows 10 won’t shut down after an update – This problem can arise if your drivers aren’t updated. Simply upgrade your drivers to the most recent version and see if it helps.
  • Windows 10 computer won’t shut down – Many users have complained that their computer won’t shut down at all. This could be caused by the Intel(R) Management Engine Interface device, so turn it off and see if that helps.
  • Shutting down Windows 10 becomes stuck — The shutdown procedure might sometimes become stuck. If you experience issues with Windows Update, this can happen. Run the Windows Update troubleshooter to see if that fixes the problem.
  • Windows 10 does not entirely shut down, leaving a black screen — The Fast Startup feature may cause this problem in rare circumstances. To repair it, simply disable this functionality and see whether it resolves your issue.
  • Windows 10 restarts instead of shutting down – This problem is caused by Microsoft‘s new rapid startup function in Windows 10.
  • Windows 10 computer won’t shut down — This issue can also be caused by Windows 10’s fast startup feature, which allows the operating system to boot up faster.
  • Windows 10 takes a long time to shut down – If your computer takes a long time to terminate programs or doesn’t go beyond that, you may have an issue with faulty software.
  • A system crash is one common cause of a Windows 10 computer turning on after shutting down. When the system crashes, Windows is set to restart automatically.
  • Windows 10 not completely shutting down – There’s a chance that Windows 10’s rapid startup function causes this issue.

These issues are frequently caused by incorrect or obsolete drivers or by the power management setup utilized.

This article will go through a few of the solutions that have worked for the vast majority of Windows 10 users.

Also See:  How to: Fix Windows 10 Photo Enhancer Not Working

1. Run the troubleshooter for Windows Update

Users have reported that Windows 10 does not permanently shut down properly due to difficulties with Windows Update.

However, most of these issues can be resolved by using the Windows Update troubleshooter.

Simply follow these simple procedures to do so:

  1. Open the Settings app on your phone. Simply press Windows Key + I to do so. Go to the Update & Security section of the Settings app when it opens.
  2. From the left-hand menu, choose Troubleshoot. Select Windows Update and then press the Run the troubleshooter option.
  3. Follow the on-screen instructions.

Check if the problem persists after the troubleshooter has completed. Keep in mind that this isn’t a universal solution, but it appears to have worked for several people, so give it a shot.

2. Turn off the Intel Management Engine Interface (IMEI)

Many users have complained that the Intel(R) Management Engine Interface driver causes Windows 10 to take an eternity to shut down.

It is recommended that you update the drivers for this device to the most recent version to resolve this issue.

Additionally, if the latest drivers aren’t working properly, you might want to try using older drivers.

In the worst-case scenario, you may have to disable this device entirely. Simply follow these instructions to do so:

  1. By pressing Windows Key + X, open the Win + X menu and select Device Manager.
  2. Right-click the Intel(R) Management Engine Interface and select Disable device from the menu.
  3. Click Yes when the confirmation dialog opens.

Check if the problem with the shutdown persists after disabling this device.

3. Install the latest drivers

Your drivers may be causing Windows 10 not to shut down completely.

It’s critical to have the most recent drivers, especially if you want to avoid conflicts between your operating system and your hardware.

As a result, it’s critical to maintain all of your drivers up to date.

To do so, go to the manufacturer’s website for the device you want to update and download the most recent drivers for your Windows version.

To do so, you must first determine your device’s model, after which you must download the necessary driver. Keep in mind that you must do this for each and every device you wish to upgrade.

Because this might be time-consuming, many users prefer to use third-party solutions like DriverFix to update their drivers.

You should check using this utility because it will automatically update all of your drivers in a couple of minutes.

4. Execute the chkdsk command

A damaged sector on your hard drive is likely causing problems with Windows shutdown in some situations.

If Windows 10 isn’t shutting down properly, the chkdsk scan might be able to help. Follow these steps to do so:

  1. As an administrator, open Command Prompt. To do so, hit Windows Key + X and then choose Command Prompt (Admin) or PowerShell (Admin) from the option that appears.
  2. Enter chkdsk /f:X and hit Enter When Command Prompt appears. Substitute the letter of your system drive for the:X. In most circumstances, the answer is C.
  3. You’ll be prompted to make an appointment for a scan. To confirm, press Y.

Your system drive will be immediately checked after you restart your PC, and any faulty sectors should be automatically repaired.

Check if the problem is still present once the scanning process is completed.

5. Restart your computer’s BIOS

Because of your BIOS settings, Windows 10 may not shut down properly in some instances.

If that’s the case, you should attempt resetting the BIOS to its default settings.

There are various ways to accomplish this, but the most basic is as follows: Select the option to load the default settings in the BIOS.

We recommend consulting your motherboard handbook for complete advice on correctly accessing and resetting BIOS. Check if the problem persists after resetting BIOS to default settings.

You can also clear the BIOS by removing the motherboard battery for a few minutes or moving the jumper to the clear BIOS position on your motherboard.

These two methods are a little more complicated, so they’re best avoided if you’re not a seasoned PC user.

6. Unplug all USB devices

USB devices could be the cause of Windows 10 not shutting down properly.

We all have many devices connected to our computers, and some of these devices can hinder your computer from shutting down properly.

To resolve this issue, make sure any superfluous USB devices are removed from your computer and see if it helps.

7. Disable the Fast Startup option

Fast Startup is a valuable function in Windows that combines hibernation and shutdown into one, allowing you to boot your computer fast.

This feature, however, may cause Windows 10 to fail to shut down properly. You may quickly turn off the Fast Startup function by following these steps:

  1. Enter power settings by pressing Windows Key + S. Select Power & Sleep Settings from the drop-down menu.
  2. Windows 10 won’t shut off my computer.
  3. Click Additional power settings after scrolling down to the Related settings section.
  4. The Power Options window will now display on the screen. From the menu on the left, select Choose what the power button does.
  5. Change settings that are now inaccessible by clicking on Change settings that are currently unavailable.

Uncheck the box for Turn on rapid startup (recommended) and then save your settings.

The Fast Startup feature will be removed as a result, and the shutdown issue should be rectified.

Remember that removing this option may cause your PC to boot slightly slower, so keep that in mind.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions:

1. Why isn’t my Windows 10 shutting down properly?

In the Start Menu, look for “Power Options” and open it. On the left side of the window, click “Choose what the power buttons do” (Figure 3). Make sure “Turn on rapid startup” is unchecked under “Shutdown settings” (Figure 4).

2. Why isn’t my PC turning off?

To shut down the computer, close all open apps and kill processes. One of the reasons Windows will not shut down is if you have specific apps open on your computer. Closing them all should take care of the problem. Select Task Manager by right-clicking on the bottom of your taskbar.

3. How can I prevent a computer from shutting down if it is stuck?

My PC is locked in shutdown mode, as originally stated. What can I do about it? Hold down the power button until the computer shuts down. Remove any source of power for 5-10 minutes (battery, power cable, power cords).

Also See:  How to: Fix Computer Shutdown Issues in Windows 10

4. Problems with my pc not shutting down fully : r/Windows10

Problems with my pc not shutting down fully from Windows10

5. Windows 10 won’t shut down properly. Screen goes blank but

Windows 10 won’t shut down properly. Screen goes blank but power button light and fans still running. from Windows10