How to: Fix Windows Driver Frameworks Uses Too Much Cpu

Here we can see, “How to: Fix Windows Driver Frameworks Uses Too Much Cpu”

• The Windows Driver Frameworks are said to consume too much CPU by many users.
• To get around this problem, all you have to do is follow the steps outlined below.
• This is just one of the many articles available in our dedicated Windows 10 Hub.
• Check out our dedicated Fix section for further troubleshooting information.

The Windows Driver Frameworks (WDF), originally known as Windows Driver Foundation, are a set of libraries for writing device drivers for the Windows operating system.

Microsoft uses WDF drivers in three different ways:

• For conventional kernel-mode device drivers, the Kernel-Mode Driver Framework is used.
• C++ COM-based user-mode drivers, the User-Mode Driver Framework v1 is available.
• For building KMDF-based user-mode drivers, utilize the User-Mode Driver Framework v2.

Many Windows users say that the Windows Driver Frameworks consume too much CPU, causing Windows to slow down and the battery to drain extremely quickly.

Windows Driver Frameworks cause high CPU utilization

[…] The Windows Driver Foundation service consumes roughly 30% of the CPU at all times. This was not the case with the prior version.

I left the machine on for a couple of hours to check if any cleanup operations were in progress, but the service is still consuming the CPU.

What can I do about WDF’s high CPU usage?

Although the Windows Driver Framework is a vital Windows service, it can occasionally cause excessive CPU utilization. In relation to this service, users have reported the following issues:

• Windows Driver Foundation consumes a lot of CPU. DisplayLink – Issues with DisplayLink can cause significant CPU utilization at times. To resolve the issue, reinstall your drivers and see if it resolves the issue.
• Wudfhost’s CPU usage is relatively high. Therefore, other services in Windows 10 can sometimes cause this issue to emerge. To fix this, make sure you reinstall the affected drivers and see if that works.
• High memory utilization by Windows Driver Foundation – This service is also known to utilize a lot of memory. If you’re having memory issues due to this service, try some of our suggestions.
• WDF excessive CPU utilization – Although this is only a version of the original problem, you should be able to resolve it by deactivating harmful services or devices.

1. Uninstall and reinstall your Wi-Fi driver

1. Before we begin, make sure you have the most recent Wi-Fi drivers from the manufacturer of your device.
2. To access the Win + X menu, press Windows Key + X.
3. Now select Device Manager from the drop-down menu.
4. Locate your Wi-Fi adapter in Device Manager, right-click it, and select Uninstall device from the menu.
5. Now you’ll get a confirmation dialogue. First, check the Remove driver software checkbox if it’s accessible. After that, select Uninstall.

According to users, your drivers can cause issues with the Windows Driver Framework and high CPU consumption. In addition, you can have problems with this process if your driver isn’t fully compatible with Windows 10.

Several people claimed that reinstalling their Wi-Fi driver fixed the problem.

After removing the driver, restart your computer and reinstall the Wi-Fi driver. Check to see whether this has resolved the issue.

It’s worth noting that various gadgets can cause this problem, and on a few occasions, customers have stated that their mouse was to blame.

Users had issues with the G-series mouse however, the issue was permanently rectified after updating the driver. If you have a Lenovo laptop, you also need to uninstall the Lenovo Transitions program.

Because Windows Driver Framework is linked to your drivers, we strongly advise that you keep your drivers up to date to resolve this issue.

Drivers are updated automatically (third-party tool suggested)

Manually downloading and installing drivers poses the risk of installing the incorrect driver, resulting in significant problems. We strongly advise that you use a driver updater tool to automatically update your driver since it can perfectly repair broken or missing drivers.

Old or incompatible drivers are the source of some of the most prevalent Windows issues and malfunctions. In addition, lag, system issues, and even BSoDs can occur if your system is out of the current.

2. Simply wait it out

Windows Driver Framework is a standard Windows process, and if it’s hogging your CPU, it’s presumably doing some background work. However, several customers stated that they were merely waiting for Windows Driver Framework to solve the problem.

This isn’t a foolproof method, but in some circumstances, waiting an hour or two can help you solve your problem, so it’s worth a shot.

3. Carry out a thorough boot cleaning

1. Enter msconfig by pressing Windows Key + R. Now hit Enter or OK to continue.
2. The window for System Configuration will now appear.
3. Select Hide all Microsoft services from the Services tab.
4. Now select Disable all from the drop-down menu.
5. Click the Open Task Manager button on the Startup tab.
6. Now you’ll get a list of all startup applications. Disable the first entry on the list by right-clicking it.
7. Rep this process for each of the startup entries on the list.
8. Close Task Manager and return to the System Configuration window after you’ve disabled all startup applications.
9. To save your changes, click Apply and OK. Restart your computer now.

Third-party programs or services can sometimes cause this problem. A clean boot is recommended to locate the source of the problem.

Your computer will now boot up without any third-party software or services. Now all you have to do is double-check to see if the issue has been repaired.

If this is the case, you’ll need to activate disabled programs and services one at a time until you locate the one causing the problem. Keep in mind that you’ll need to restart your computer to see the changes take effect after activating a program.

4. Turn off the SDO Sensor and any other devices that are causing problems

1. Open the Device Manager program.
2. Locate SDO Sensor in the list, right-click it, and select Disable device from the menu that appears.
3. Click Yes when the confirmation dialog opens.

If you have a touchscreen device, the SDO sensor is most likely the source of your PC’s problem. Users recommend turning off the SDO sensor entirely as a remedy.

Keep in mind that removing SDO Sensor may disable several functionalities of your device, but the issue with excessive CPU utilization should be rectified.

Disabling Intel Wireless Gigabit 17265 fixed the problem for several users thus, if you have this device, make sure to disable it.

5. Unnecessary USB peripherals should be removed

Because of your USB devices, you may experience issues with the Windows Driver Framework and high CPU consumption. In addition, specific devices can cause this problem by interfering with Windows.

To resolve the issue, disconnect the relevant USB devices and see whether this resolves the issue.

Keep only the most important devices connected, such as your keyboard and mouse, and unplug everything else. Then, check to see whether the problem still exists after that.

If it doesn’t work, try connecting USB devices one at a time until you locate the one that’s causing the problem. Once you’ve located the malfunctioning device, just reinstall or update its drivers to see if the problem is resolved.

6. Turn off the NFC feature

1. To access the Settings app, press Windows Key + I.
2. Go to the Network & Internet area now.
3. From the left-hand menu, select Airplane Mode.
4. Disable NFC on the right pane now.

Although NFC is a beneficial feature, it can occasionally cause Windows Driver Framework problems. To resolve the issue, it is recommended that NFC be turned off totally.

Checking your Airplane mode settings is the simplest way to do so.

You may also use Device Manager to turn off NFC. Simply navigate to the Proximity Devices section of Device Manager.

Disable your proximity device, and NFC should be entirely disabled. This problem should be resolved entirely once the NFC is disabled.

7. Check to see if your computer is up to date

1. Go to the Update & Security section of the Settings app.
2. Now, go ahead and click the Check for Updates option.

If you’re having problems with Windows Driver Framework, you may be missing an update.

This problem could be caused by a flaw in your system, in which case updating Windows is the best method to fix it.

Windows 10 will automatically install any needed updates by default, but you may miss one or two.

Windows will now look for available updates. If any updates are available, they will automatically be downloaded in the background.

When the updates have finished downloading, restart your computer to install them. After updating Windows to the most recent version, the problem should be permanently resolved.

8. Use the System Restore option

1. Enter system restore by pressing Windows Key + S.
2. From the menu, select Create a restore point.
3. The window for System Properties will now appear.
4. Select System Restore from the drop-down menu.
5. Click Next when System Restore appears.
6. Check Show more restore points if it’s available. Now select the desired restore point and go to the next step.
7. To restore your computer, follow the on-screen directions.

Conclusion

I hope you found this information helpful. Please fill out the form below if you have any questions or comments.

User Questions

1. How do I fix Windows’ high CPU usage?

1. Reboot. First and foremost, save your work and restart your computer.
2. Processes can be stopped or restarted. (CTRL+SHIFT+ESCAPE) Open the Task Manager.
3. Drivers should be updated.
4. Scan your computer for malware.
5. Optional Power.
6. On the internet, you can find specific advice.
7. Windows is being reinstalled.

2. Is it necessary to install Windows Driver Foundation?

Yes, Windows Driver Foundation is required to operate Windows 11/10 on your computer. It aids with the seamless operation of your computer’s drivers. The Windows Driver Foundation must be activated on your computer since drivers allow you link your hardware to software.

3. What is the procedure for turning off WUDFHost?

1. Click OK after pressing Windows Key + R and typing devmgmt.msc. Open the devmgmt.msc file.
2. Locate NFC, right-click it, and choose Disable Device > Yes from the menu. The hungry WUDFHost.exe process should now shut down. NFC should be turned off.
3. Restart your computer, and your WUDFHost.exe problems should be resolved.

4. User-mode Driver Framework Host Process Using all my

Windows Driver Foundation – User-mode Driver Framework Host Process Using all my internet and a bit of my GPU? from Windows10

5. Extremely high CPU usage : r/Windows10 – Reddit

Extremely high CPU usage from Windows10