Here we can see, “0xc000014C: Fix for Windows Vista, 7, 8, 8.1, 10”
For Windows XP, Vista, 7, 8, 8.1, or 10, get a remedy for the “0xc000014C: error attempting to read the boot configuration data” boot error.
Symptoms and description
This error is linked to the error messages, alerts, warnings, and symptoms listed below.
Symptom 1: On starting, a 0xc000014C error screen appears.
Error messages with alternative information “Info: An error occurred while attempting to read the boot configuration data,” your PC will most likely say. Users reported further problems with File: as “BootBCD,” including:
- File: \Windows\system32\config\system
Info: Windows failed to load because the system registry file is missing or is corrupt - Info: The Boot Configuration Data for your PC is missing or contains errors
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance File: \Boot\BCD Status: 0xc000014C Info: An error occurred while attempting to read the boot configuration data.
The information message on Windows 8/10 looks like this:
Windows Recovery Environment Your PC needs to be repaired The Boot configuration data for your PC is missing or contains errors. File: \Boot\BCD Error code: 0x000014c You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
This Error’s Causes
One or more of the following factors have been linked to this error:
Cause 1: BCD is corrupted or absent
The BCD being absent or corrupted is one of the most typical reasons for this error. This could occur due to disk write problems, power outages, boot sector viruses, or mistakes made while manually configuring the BCD.
Cause 2: The integrity of the file system has been violated
The file system may become corrupt or damaged for the same reasons. When a computer is turned off while it is in the middle of writing important data to the boot sector, this happens even more frequently.
Cause 3: System files have been corrupted
For the same reasons, system files can become corrupt or destroyed.
Getting rid of “0xc000014C” on Windows
Fix 1: Use Easy Recovery Essentials to rebuild your BCD
Even if Windows won’t boot due to the error, Easy Recovery Essentials’ one-click automated system repair tool includes comprehensive repair and reconstruction of the BCD to resolve the “0xc000000f” error.
EasyRE’s automated boot repair component will address all BCD-related difficulties, which will either patch the BCD or recreate it from scratch using the correct encoding and location for the partition that is refusing to load properly.
Easy Recovery Essentials’ built-in Automated Repair feature can automatically fix numerous issues like these. EasyRE can be downloaded and produced on any PC and is presently available for Windows XP, Vista, 7, and 8.
- Download Easy Recovery Essentials.
- The image should be burned.
- Start your computer with the Easy Recovery Essentials CD or USB you made.
- After EasyRE has started, select “Automated Repair” and click Continue.
- After EasyRE has finished scanning your computer’s disks, find and pick the drive letter for your Windows installation from the list, and then click the Automated Repair option to start the repair process.
- Easy Recovery Essentials will begin looking for faults on the selected drive. EasyRE will scan the disk, partition, bootsector, filesystem, bootloader, and registry for faults and attempt to automatically rectify them. EasyRE’s repair is totally automated; thus no interaction is required:
- EasyRE will provide its findings after the process is completed. To reboot your PC and test the changes, click the Restart option.
As your PC starts to load, the “0xc000014C” error should be fixed:
In Windows Vista, fix 0xc000014C
This error can be fixed without the use of an installation disc.
Fix 1: Reset the system to the last known good configuration
The Last Known Good configuration settings instruct your system to use the most recent version of system files and registry entries.
The steps are as follows:
- First, your computer should be restarted.
- Then, F8 should be pressed several times.
- This will bring up the Startup Options panel.
- Choose the most recent good configuration.
Fix 2: Run sfc /scannow
By booting into Safe Mode, you can execute the sfc (System File Checker) command without having to use your installation CD (with Command Prompt).
- Your computer should be restarted.
- F8 should be pressed several times.
- This will bring up the Startup Options panel.
- Using Command Prompt, select Safe Mode.
- Type the following command into the Command Prompt when it appears:
sfc /scannow
6. Press Enter.
In Windows 7, fix 0xc000014C
Fix 1: Run the sfc command
On Windows Vista and Windows 7, the built-in Windows SFC (system file checker) program can be used to automatically scan and repair a computer’s system files.
The steps to run SFC are as follows:
- Start by booting from your Windows installation DVD.
- Then, after selecting the appropriate language, time, and keyboard input, click Repair your machine.
- Click Next after selecting the Windows installation drive, commonly C:
- When the System Recovery Options box displays, select Command Prompt.
- After that, type the following command and click Enter:
sfc /scannow /offbootdir=D:\ /offwindir=D:\Windows\
D:Windows is the location of the Windows folder, and D:Windows is the letter of the driver where Windows is installed.
0xc000014C is a bug in Windows 8, 8.1, and 10
Fix 1: Run the chkdsk command
- Place the installation disc in the drive.
- Your computer should be restarted.
- At the “Press any key to boot from CD or DVD” message, press any key to boot from the disc.
- Select a keyboard layout.
- Choose a language, a time zone, and a keyboard method.
- Next should be selected.
- Select Computer Repair from the drop-down menu.
- Click Troubleshoot on the Choose an option screen.
- Click Advanced options on the Troubleshoot screen.
- Click Command Prompt on the Advanced options screen.
- Type the following command into Command Prompt when it appears:
chkdsk C: /f /x /r
12. Press Enter.
Conclusion
I hope you found this information helpful. Please fill out the form below if you have any queries or comments.
User Questions
1. What causes the 0xc000014c error code?
Malware, damaged, or corrupted system files are all possible causes of Error code 0xc000014c. Inconsistency of System Files: The error code 0xc000014c may appear if the computer shuts down unexpectedly while writing crucial data to the boot sector.
2. What is the solution to the 0xc000014c error code?
- Place the installation disc in the drive.
- Your computer should be restarted.
- At the “Press any key to boot from CD or DVD…” message, press any key to boot from the disc.
- Select a keyboard layout.
- Choose a language, a time zone, and a keyboard method.
- Next should be selected.
- Select Computer Repair from the drop-down menu.
3. I don’t have an installation CD, so how can I fix the error code 0xc000014c?
The Boot/bcd error 0xc000014c is a major Windows bug prohibiting users from regularly booting their computers. Unfortunately, if you don’t have the original Windows installation disc, the only option to fix it is to use a bootable installation media, which can be made.
4. Windows 10 suddenly fails to boot with 0xc000014c BCD related issue
Windows 10 suddenly fails to boot with 0xc000014c BCD related issue from techsupport
5. Very specific problem (error code 0xc000014c)
Very specific problem (error code 0xc000014c) from techsupport
