How to: Fix Windows Installer Error 0x80300002

Here we can see, “How to: Fix Windows Installer Error 0x80300002”

• Since they can prohibit your OS from installing software, Windows Installer problems can be very significant.
• Windows Installer error 0x80300002 is an excellent illustration of one of these errors.

The Windows Installer Error 0x80300002 is therefore present. This indicates that there is a problem with the partition or the installation media since the system cannot be installed on the partition you specified.

If the 0x80300002 error occurred, you most likely see the following on your screen: We could not install Windows where you specified. Check your media drive, please. Here is further information regarding what occurred: 0x80300002.

Sounds severe and difficult, but don’t get alarmed. The computer is capable of sensing your anxiety and using it against you. Obviously not! Together, we’ll get this resolved quickly.

How can I fix Windows Installer Error 0x80300002?

Checking for compatibility concerns between the media and the BIOS would be a more delicate strategy.

Your BIOS should be set to UEFI if you are installing Windows 10 from an external HDD or SDD that is based on GPT (GUID Partition Table), and it must be set to Legacy if the media is based on MBR (Master Boot Record).

Sounds complicated, however switching your BIOS boot mode is the easiest fix if you are unfamiliar with either of them. The option can be found in the Boot section.

2. Create another bootable drive

1. 1. Put in a functional USB drive.
   2. Enter cmd by clicking the Windows key and R to launch Command Prompt.
   3. Type diskpart to launch the disk partitioning program when a new window appears.
   4. Type the list disk into the new window to find all the drives on your computer and the external media.
      • Of course, the goal here is for you to recognize the proper drive.
   5. To pick a drive, type disk X (where X is the proper drive number), and then type clean to clear the drive of all data and configuration information.
   6. Type create part pri and pick part 1 to choose a new partition to add to the device.
   7. Enter the command format fs=ntfs quickly to format it as the following step.
   8. Type active to turn on the recently formatted partition.
   9. Save the Windows 10 image to the root of the USB storage device, assuming you have it handy.

3. Recreate all partitions

If nothing you’ve read thus far has worked, you’ll need to start over, which entails establishing all the partitions from scratch. However, it’s not too tricky, so don’t worry.

Simply continue the installation process until you reach the prompt asking where you want Windows installed (Where do you want to install Windows?).

You must choose to delete the partitions there, which is what you should do. All the sections should be deleted before starting over using the New button.

You don’t need to establish the other partitions in great detail because you only need one primary section to install the new system. After the new system has been installed successfully, you can do that.

Of course, please continue with the installation and perhaps squeal with delight when it is finished.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions

1. Windows 10 install error 0x80300002 : r/Windows10 – Reddit

Windows 10 install error 0x80300002 from Windows10

2. Installation Error: 0X80300002 – How to fix? : r/buildapc – Reddit

Installation Error: 0X80300002 – How to fix? from buildapc

3. Trouble clean installing windows 10 on a laptop. 0x80300002

Trouble clean installing windows 10 on a laptop. 0x80300002 from techsupport