samsung tablet battery problem

949
samsung tablet battery problem

Here we can see “Samsung tablet battery problem

Are you having charging issues on your Galaxy tablet? This troubleshooting article will show you the possible solutions if your Galaxy Tab A doesn’t charge. We attempt to be as exhaustive as possible to hide as many factors causing this issue. We hope you’ll fix the matter easily with the assistance of this post.

Before we proceed, we would like to remind you that if you’re trying to find solutions to your own #Android issue, you’ll contact us using the link provided at the rock bottom of this page. When describing your issue, please be as detailed as possible to pinpoint a relevant solution easily. If you’ll, kindly include the precise error messages you’re going to give us a thought on where to start. If you’ve got already tried some troubleshooting steps before emailing us, confirm to say them so we will skip them in our answers.

How to fix Galaxy Tab A that won’t charge | not charging

If your Galaxy Tab A doesn’t charge for a few reasons, you want to consider various things to repair it. Learn what steps you would like to try to to to repair the matter.

Galaxy Tab A won’t charge fix #1: Charge the tablet

This suggestion may sound silly but confirm to go away the tablet charging for a few times. In many cases, Samsung Galaxy devices that appear to power on or not charge have run out of juice. If the battery on your Galaxy Tab A may have drained, this might be the rationale why it won’t charge. It can sometimes take a couple of minutes to display the charging indicator screen if the battery has been emptied to a particular level. Leave your tablet charging for a few half hours and see what happens.

Also See:  How Can I Spy on a Cell Phone Without Installing Software on the Target Phone?

Galaxy Tab A won’t charge fix #2: Check the charging port

One of the possible reasons your Galaxy Tab A may fail to charge is often a nasty charging port. This doesn’t mean a defect is present within the port. Instead, there may only be dirt, lint, or foreign object preventing the charging cable from making good contact during charging. to see the port:

  1. Try employing a magnifier to ascertain more clearly inside.
  2. If you notice dirt or debris inside, confirm to get rid of it by employing a can of compressed gas.
  3. Don’t stick anything inside to avoid damaging the system.

It would help if you didn’t try to do anything more to the charging port aside from seeing it visually. If you think that the charging port could also be damaged or see a clear indication that there’s a physical malfunction within the port, confirm to send the phone in so it is often repaired.

Galaxy Tab A won’t charge fix #3: Verify if the phone has frozen (by doing forced Reboot)

All Samsung devices with power issues can enjoy a restart. Even during this extreme case, you don’t want to skip this easy solution. Here’s what you would like to do: Press and hold the quantity Down button and therefore the Power key at an equivalent time for 10 seconds or until the device’s screen activates.

Should that change anything, you’ll then try these steps:

  1. Press and hold the quantity Down button first, and don’t release it.
  2. While holding it down, press and hold the facility key.
  3. Keep both keys held down for 10 seconds or more.

Galaxy Tab A won’t charge fix #4: Check the charger accessories

Making sure that the USB cable and adapter you’re using are working is a crucial initiative in fixing this problem. Just like the phone itself, charging accessories, especially the USB cable, can break relatively easily. The cable consists of thin, tiny wires inside, and if tons of those wires are broken, charging may fail. In addition, there might not be enough power being transferred during charging resulting in slow or inefficient charging. If there’s a clear sign of physical damage to the cable or adapter, attempt to see if it’s working properly by using it to charge another Galaxy Tab A. If that’s impossible, try connecting your device to a computer using that very same cable. If it still doesn’t charge, you’ll bet a nasty cable is responsible.

Galaxy Tab A won’t charge fix #5: Check for updates

If Galaxy Tab A still doesn’t charge, make certain that it’s software and apps run their latest version. Although Galaxy devices are set to notify you of available software updates automatically, things could also be different for apps. To confirm also to check if there are any available updates for the app within the Play Store. If both software and apps are already updated at this point, continue with the troubleshooting steps below.

Galaxy Tab A won’t charge fix #6: Disconnect SD card

Sometimes, removing an SD card from a Galaxy device helps in fixing this sort of issue. Attempt to reseat the SD card and see what happens afterward. Here’s the way to remove the SD card:

  1. From the house screen, tap Settings.
  2. Scroll to and tap Storage.
  3. Tap DETAIL.
  4. Tap SD card.
  5. Tap Unmount.
  6. Remove the SD card.

Galaxy Tab A won’t charge fix #7: Charge via a PC

In another case, connecting a non-charging device to a PC can help. Confirm using the first USB cable to eliminate the likelihood of a nasty cable problem. 

Galaxy Tab A won’t charge fix #8: Reset app preferences

Sometimes, charging issues could also be fixed by ensuring that default apps are enabled. Android apps and services don’t operate on their own. Most need other apps and default system apps to try to do their tasks. If one among the default apps is disabled for a few reasons, there is often a drag. to make sure that each one default apps are enabled again, you’ll do these steps:

  1. Open Settings app.
  2. Tap Apps.
  3. Tap on More settings at the upper right (three-dot icon).
  4. Select Reset app preferences.
  5. Restart your Galaxy Tab A and check for the matter.
Also See:  blur in paint 3d

Galaxy Tab A won’t charge fix #9: Charge on Safe Mode

If your Galaxy Tab A won’t charge after installing a replacement app, the next good thing to try is to delete that app or restart to safe mode. During this mode, only apps that came with the OS are going to be allowed to run. All the remainder that you’ve added will be blocked, so if one among them is causing your tablet not to work, you ought to realize it. The thought is that since no third-party apps are running on safe mode and therefore the tablet activates, the basis cause must be one among them. Else your device to safe mode:

  1. With your Tab A off, press and hold the facility key past the model name screen.
  2. When “SAMSUNG” appears on the screen, release the facility key.
  3. Immediately after releasing the facility key, press and hold the quantity down key.
  4. Continue to hold the quantity down key until the device finishes restarting.
  5. Safe mode will display within the bottom left corner of the screen.
  6. Release the quantity down key once you see Safe Mode.

If your Galaxy Tab A normally charges to safe mode, meaning that a 3rd party app is preventing it from turning back on. to spot which of your apps is causing the matter, follow the steps below:

  1. Boot to safe mode.
  2. Check for the matter.
  3. Once you’ve confirmed that a 3rd party app is responsible, you’ll start uninstalling apps individually. Again, we propose that you begin with the foremost recent ones you added.
  4. After you uninstall an app, restart the phone to normal mode and check for the matter.
  5. If your Tab A still refuses to power back on, repeat steps 1-4.

Galaxy Tab A won’t charge fix #10: Wipe cache partition

If your Galaxy Tab A had a charging issue after installing a system update, the cause could also be a nasty system cache. to see if that’s the case, try clearing the cache partition. This may prompt the device to rebuild the system cache. Here’s how it’s done:

Turn off the device. This is often important. If you can’t turn it off, you’ll never be ready to boot to Recovery Mode. If you’re unable to shut the device off regularly via the facility button, wait until the phone’s battery is drained. Then, charge the phone for a half-hour before booting to Recovery Mode.

  1. Press and hold the quantity Up key and, therefore, the Power key.
  2. When the Samsung Galaxy Tab A logo screen displays, release all of the keys.
  3. The Android Recovery screen should then show you many options like Reboot system now, Reboot to bootloader, Apply update from ADB, wipe data/factory reset, wipe cache partition, etc. To navigate to any of the choices, just use the quantity Up and Down buttons. 
  4. Highlight wipe cache partition.
  5. Press Power to clear the cache partition.
  6. After wiping the cache partition, reboot the device.

Galaxy Tab A won’t charge fix #11: Recalibrate battery and OS

Sometimes, Android may lose track of the particular battery levels, which successively can cause charging problems. To recalibrate the OS so that it gets accurate battery level readings, do the following:

  1. Drain the battery completely. This suggests using your device until it powers down on its own, and therefore the battery level reads 0%.
  2. Charge the phone until it reaches 100%. Make certain to use original charging equipment for your device and let it agitate completely. Don’t unplug your device for a minimum of two more hours, and also, don’t use it while charging.
  3. After the period, unplug your device.
  4. Restart the device.
  5. Use your phone until it completely runs out of power again.
  6. Repeat steps 1-5.

Galaxy Tab A won’t charge fix #12: Factory reset

If your Galaxy Tab A still doesn’t charge now, consider wiping its software with a factory reset. This wipes all software settings and returns them to their factory state. Unfortunately, factory reset will delete all of your apps and private data, so make certain to make a backup before time.

For reference, here are the two ways to factory reset your device:

Method 1: the way to hard reset on Samsung Galaxy Tab A via Settings Menu

This is the simplest thanks to wiping your Galaxy Tab A. All you’ve got to try is to travel under the Settings menu and follow the steps below. We recommend this method if you’ve got no trouble foundering Settings.

  1. Create a backup of your personal data and take away your Google account.
  2. Open Settings app.
  3. Scroll to and General tap management.
  4. Tap Reset.
  5. Select Factory data reset from the given options.
  6. Read the knowledge, then tap Reset to continue.
  7. Tap Delete All to verify the action.

Method 2: the way to hard reset on Samsung Galaxy S10 using hardware buttons

If your case is that the phone isn’t booting up or boots, but the Settings menu is inaccessible, this method is often helpful. First, you would like else the device to Recovery Mode. Once you successfully access Recovery, that’s the time that you begin the proper master reset procedure. It’s going to take some tries for you before you access Recovery, so twiddling my thumbs and easily try again.

  1. Turn off the device. This is often important. If you can’t turn it off, you’ll never be ready to boot to Recovery Mode. If you’re unable to shut the device off regularly via the facility button, wait until the phone’s battery is drained. Then, charge the phone for a half-hour before booting to Recovery Mode.
  2. Press and hold the quantity Up key and, therefore, the Power key.
  3. When the Samsung Galaxy Tab A logo screen displays, release all of the keys.
  4. The Android Recovery screen should then show you many options like Reboot system now, Reboot to bootloader, Apply update from ADB, wipe data/factory reset, wipe cache partition, etc. To navigate to any of the choices, just use the quantity Up and Down buttons. 
  5. Highlight wipe data/factory reset.
  6. Press Power to start the factory reset.
  7. Follow the remainder of the instructions after a factory reset.

Galaxy Tab A won’t charge fix #13: Repair

There are some issues that a user might not be ready to fix. For example, if your Galaxy Tab A still doesn’t charge after a factory reset, there could also be a deeper hardware issue behind it. Visit your local Samsung store or Service Center to possess the device examined and glued.

User Questions:

1. Samsung galaxy tab 2 7.0 battery problem

I have a drag with my Samsung Galaxy tab 2 7.0 (Android)

When I plug it into the charger, a touch x goes through the battery symbol and says ‘not charging.’

What is wrong?

How am I able to fix this?

2. Galaxy Tab a ten .1 battery drain (idle)

3. Samsung galaxy tab three battery problem

the tablet that I even have been using has normally been working. Still, lately, I have noticed that every time I plug my charger into it (no matter what charger) after an extended time of usage, sometimes like 1 hour or more, it shuts down, and once I boot, it haves 0% battery. Should I buy a replacement battery, or what’s the problem? also, if I plug the charger for a short time enough, it doesn’t shut itself only after while it’s been used

Also See:  100% Fix: VPN Is Not Working on Windows 7 Computers

4. Samsung Tab S6 Battery Drain

 If you attend Settings > Device Maintenance > Battery > Battery Usage, does one see any apps or features using an abnormal amount of battery? If so, and it’s a downloaded, third-party app, please delete it to ascertain if you notice an improvement.

5. Why is my Samsung Galaxy Tab A battery draining so fast?

Google services aren’t the sole culprits; third-party apps also can grind to a halt and drain the battery. If your phone keeps killing the battery too fast even after a reboot, check the battery information in Settings. If an app is using the battery for an excessive amount, Android settings will show it clearly because of the offender.