If your PC stuck at motherboard screen, it could be due to a number of reasons. One possible reason is that your PC may not be detecting the hard drive. To troubleshoot this, try disconnecting the hard drive and connecting it to another PC to see if it is detected. If it is not detected, then you may need to replace the hard drive. Another possible reason is that your PC may not be detecting the RAM. To troubleshoot this, try disconnecting the RAM and connecting it to another PC to see if it is detected. If it is not detected, then you may need to replace the RAM.
If the issue persists after troubleshooting, then there may be a problem with the motherboard. In this case, you may need to replace the motherboard.
What to Do If Your Pc Gets Stuck at Motherboard Screen
There are a few things you can try to fix this issue:
-Check if the issue persists in safe mode. If it does, then there may be a problem with the motherboard.
-Try to reinstall the operating system.
-If all else fails, then you may need to replace the motherboard.
Solution 1: Boot Your Pc Without Peripherals
If your PC is stuck at the motherboard screen, you can try to boot it without peripherals. To do this, you’ll need to press and hold the power button until your PC turns off. Once it’s off, press and hold the power button again to turn it on. This will boot your PC without any peripherals connected.
Boot Into Safe Mode
If your PC is stuck at the motherboard screen, you can try to boot it into safe mode. To do this, you’ll need to press and hold the F8 key while your PC is booting. This will bring up the boot options menu. From there, select safe mode. This will boot your PC in safe mode.
Solution 2: Check the Ram
If you’ve ruled out the PSU and the motherboard, then the next step is to check the RAM. Remove the RAM from the motherboard and reseat it. If the problem persists, then the RAM is likely faulty and needs to be replaced.
Solution 3: Reset Bios Settings
If the previous solutions do not work, you may need to reset the BIOS settings.
To do this, you will need to enter the BIOS settings. The process for doing this will vary depending on your motherboard, but it will typically involve pressing a specific key on your keyboard while your computer is booting up.
Once you are in the BIOS settings, you will need to locate the reset or restore settings option. This option will vary depending on your motherboard, but it will typically be located in the menus near the top of the screen.
Once you have located the reset or restore settings option, you will need to select it and then confirm your selection. This will reset your BIOS settings to their defaults.
After resetting your BIOS settings, you will need to restart your computer and try again.
Solution 4: Restore Your System to the Previous State
If the problem persists, you can restore your system to the previous state.
1) On your keyboard, press the Windows logo key and R at the same time to invoke the Run box.
2) Type rstrui and click OK.
3) Follow the instructions on the screen to restore your system.
Solution 5: Repair Corrupted System Files
Sometimes, the system files on your computer may get corrupted, which can cause the PC stuck at motherboard screen. To repair the corrupted system files, you can try using the built-in Windows system file checker.
1) On your keyboard, press the Windows logo key and X at the same time.
2) Click Command Prompt (Admin).
3) Type sfc /scannow and press Enter.
4) Wait for the process to finish.
5) Restart your computer.
Solution 6: Perform a Fresh Install
If the above solutions don’t work for you, your last resort may be to perform a fresh install of Windows 10. This will erase all your data, so be sure to back it up first.
Conclusion
This problem is usually caused by a defective motherboard or graphics card. If you have recently replaced any of these components, you may need to return them and purchase new ones. If you have not replaced any of these components recently, you may need to have your computer serviced.
