Fix Error 0x802a0002: Shutdown Was Already Called on This Object

Here we can see, “Fix Error 0x802a0002: Shutdown Was Already Called on This Object”

Did the message “Shutdown was already called on this object or the object that owns it” appear on your screen? Do not be concerned; we will demonstrate how to resolve this issue.

When a hardware device, such as a mouse, keyboard, USB, flash drive, mobile device, etc., is connected to the system, Windows users frequently see this prompt.

The foreclosure from “Device Manager” that follows the error prompt shows that there is a hardware problem. But either the hardware or the hardware driver can be to blame for the issue.

The greatest workarounds for the “shutdown was already called on this object or the object that owns it” dilemma are mentioned below if you’re searching for them:

SOLVED: Shutdown was already called on this object

Solution 1: Use SFC Scan

The hardware driver may be overwritten by malware or virus infection, causing the error issue. SFC scans for and fixes corrupt system file violations as a workaround for the “shutdown was already called on this object or the object that owns it” problem.

Here’s how to perform an SFC scan on a version of Windows 10:

• • Select Start. Input the command prompt. “Command Prompt run as administrator” should be selected.
  • Type sfc /scannow onto the command line.
  • Watch for the procedure to be finished.
  • The Command Prompt should then be closed.

Alternatively, you can fix damaged system files in the Windows registry by using proactive tools like CCleaner or other PC cleaning applications.

You might wish to go on to the next method if, after attempting this method, you’re still seeing the message “shutdown was already called on this object or the object that owns it.”

Solution 2: Use the Hardware and Devices troubleshooter

Running Hardware and Devices troubleshooter is another easy technique to fix this error. This diagnostic tool searches for potential problems and resolves them. Additionally, it makes it simple to install new hardware.

The troubleshooter should be used as follows:

• • Select Control Panel by going to Start >.
  • Now pick “Large icons” from the drop-down menu under the “View by” option in the top right corner of the screen.
  • To view all options, select View all from the Troubleshooting menu in the left window.
  • Then select “Hardware and Devices.”
  • Run the troubleshooter by following the instructions.

Continue to the next method if the hardware issue with “shutdown was already called on this object or the object that owns it” still exists.

Solution 3: Update the device driver

Outdated or old device drivers could bring on error 0x802A0002. You should thus upgrade the device driver.

To update the driver, take the following actions:

• • Type “Device Manager” into the Start menu and press the “Enter” key.
  • To broaden the category, click on the concerned device (such as a USB mouse, a keyboard, a mouse, etc.).
  • Click “Update Driver Software” from the context menu of the problematic driver.
  • To upgrade the device driver, adhere to the instructions.

Alternatively, you can use a third-party utility to automatically update the out-of-date hardware drivers (and any other drivers) on your PC. This tool has been certified and tested by our staff.

Solution 4: Reinstall the driver

Error 0x802A0002: “shutdown was already called on this object or the object that owns it” can also be resolved by reinstalling the hardware.

How to do it is as follows:

• • Start by right-clicking it. The “Control Panel” option.
  • Click System twice > Select Device Manager after clicking the Hardware tab.
  • To extend the category, click on the affected device (such as USB, mice, keyboards, etc.).
  • Right-click the problematic driver, select “Uninstall,” and then follow the on-screen instructions.
  • Reboot your computer. Windows immediately detect the modification to your hardware.
  • From the manufacturer’s official website or Microsoft’s driver download center, download and install the hardware’s driver.

Solution 5: Run System Restore

This issue can occasionally occur after a recent program installation. The system restore tool allows you to roll back your system to a previous restore point, most likely one that occurred before the most recent software installation.

Using system restore on a Windows 10 computer is as follows:

1. 1. Until the Automatic Repair notification shows, hold down the power button.
   2. Access System Restore by going to Troubleshoot > Advanced Options.
   3. Select your username and type in your password right away.
   4. To restore your PC, click Next, choose the desired restore point, and then follow the on-screen directions.
   5. Check to see whether the issue persists after your PC has been restored.

You may need to go on to the next solution if you didn’t set a restore point previously or if “system restore” didn’t work to fix the problem.

Solution 6: Run Windows Updates

Windows Updates apparently repaired error 0x802A0002. It was already time for shutdown. This is due to automatically installing any missing or out-of-date hardware drivers. As a result, you might attempt launching a Windows update to fix the problem.

How to run Windows updates is as follows:

• • Enter “update” into the Start search box, then click “Windows Update” to continue.
  • Check for updates and install any that are available in the Windows Update window.
  • Restart your Windows computer after the update is finished.

Solution 7: Replace the affected Device

Due to technical limitations and their tiny condition, some external hardware devices cannot be easily fixed. For instance, some computer specialists find fixing a broken USB drive difficult.

The best course of action is to replace the problematic device, as new hardware is installed from scratch following the connection. Additionally, the impacted gadget can have minor problems that are difficult to resolve.

You can buy a new hardware item from Amazon or your neighborhood computer store if the one in question does not come with a warranty for replacement.

Error 0x802A0002: shutdown was already called on this object, or the object that owns it should be fixed as a result of these remedies.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions

 

1. Error communicating with device : r/Calibre – Reddit

Error communicating with device from Calibre

2. copy failed shutdown was already called on this object – Reddit

copy failed shutdown was already called on this object from musicbee

3. Origin error while shut down PC. Same after Windows clean 

Origin error while shut down PC. Same after Windows clean installation. Is that common issue ? from origin