KERNEL SECURITY CHECK ERROR – Fix for Windows XP, Vista, 7, 8, 8.1, 10

Here we can see, “KERNEL SECURITY CHECK ERROR – Fix for Windows XP, Vista, 7, 8, 8.1, 10”

Symptoms and description

This error is linked to the error messages, alerts, warnings, and symptoms listed below.

Symptom 1: KERNEL SECURITY CHECK ERROR error screen

The error is commonly triggered when the kernel detects data corruption, which can be caused by a USB-related issue or a defective driver or device in most circumstances.

The error screen in Windows 8, Windows 8.1, and Windows 10 looks like this:

:(

Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we’ll restart for you. (0%
complete)

If you'd like to know more, you can search online later for this error: KERNEL_SECURITY_CHECK_ERROR

This Error’s Causes

One or more of the following factors have been linked to this error:

Cause 1: Corrupt system files or drivers

Corrupt or missing system files or hardware drivers are the most prevalent error causes. This can happen as a result of read/write failures on the disk or malware attacks. If that’s the case, it’s a good idea to check for faults in the system files and restore them if necessary.

Fixing the Windows “KERNEL SECURITY CHECK ERROR”

Fix 1: Use Event Viewer to look at the error log

You can troubleshoot and pinpoint the reason for the error using the Event Viewer tool.

Follow these steps to get to Event Viewer:

1. Start by pressing the Start button.
2. In the search box, type Administrative Tools.
3. From the list of results, choose Administrative tools.
4. Select Computer Management as your option.
5. From the right side, expand the Event Viewer tree.
6. The Windows logs tree can be expanded.
7. Choose a system.
8. Look for error messages that can help you figure out which device or driver is causing the error.

If a device or driver from the error list can be identified, deactivate it and restart your computer to see if the error comes again.

Fix 2: Run Driver Verifier

The Driver Verifier program can check all of your installed drivers and may be able to detect damaged files and drivers. In addition, the Driver Verifier program can detect the malfunctioning driver if a corrupt driver causes the KERNEL SECURITY CHECK ERROR error.

Follow these steps to get to Driver Verifier:

1. To begin, open Windows.
2. Start by pressing the start button.
3. To open Command Prompt, type cmd into the search box.
4. From the search results list, right-click on the Command Prompt item.
5. Select Run as Administrator from the menu.
6. In the Command Prompt, type verifier.
7. Press Enter.
8. Then click Next after selecting the Create standard settings check box.
9. Select the option to select all installed drivers on this computer automatically.
10. Click the Finish button.

Follow these methods to test against specific drivers:

1. To begin, open Windows.
2. Start by pressing the start button.
3. In the search box, type verifier.
4. Next, choose the option to create custom settings.
5. Next should be selected.
6. Select everything from the complete list of individual options in the Select individual settings section. Leave the DDI compliance testing and randomized low resource simulation unchecked if you’re using Windows 8/8.1.
7. Choose from a selection of driver names.
8. Next should be selected.
9. Select all drivers that aren’t listed with Microsoft as a vendor from the new list.
10. Click the Finish button.

If the KERNEL SECURITY CHECK ERROR displays again, the Driver Verifier utility will run in the background and save any error reports. To troubleshoot the driver, examine the logs if the error occurs.

Fix 3: Run sfc

On Windows Vista and Windows 7, the built-in Windows SFC (system file checker) program can be used to scan and repair a computer’s system files automatically.

The steps to run SFC are as follows:

1. Start by booting from your Windows installation DVD.
2. After selecting the appropriate language, time, and keyboard input, click Repair your machine.
3. Click Next after selecting the Windows installation drive, commonly C:.
4. When the System Recovery Options box displays, select Command Prompt.
5. After that, type the following command and click Enter:

sfc /scannow /offbootdir=D:\ /offwindir=D:\Windows\

D:Windows is the location of the Windows folder, and D:Windows is the letter of the driver where Windows is installed.

Here’s an example of what the PC’s console output should look like when the sfc.exe scan is finished, and all missing files are correctly restored:

Fix 4: Clean boot

If the KERNEL SECURITY CHECK ERROR comes from a recently installed third-party device or driver, a clean boot of Windows will allow you to troubleshoot.

Follow these procedures to clean boot a Windows XP, Vista, or 7 system:

1. To begin, open Windows.
2. To find msconfig, go to Start and type it in the search box, or go running and type it in.
3. Press Enter.
4. Select the General option from the drop-down menu.
5. Select the radio button for Selective Startup.
6. Uncheck the box labelled Load startup items.
7. Go to the Services section of the menu.
8. Check the option labelled Hide all Microsoft services.
9. Disable everything by clicking Disable all.
10. Click the OK button.
11. Your computer should be restarted.

Follow these instructions to clean boot a Windows 8 or 8.1 system:

1. Next, follow the instructions outlined above for Windows XP/Vista/7.
2. Next, select the Startup option from the drop-down menu.
3. All startup stuff should be disabled.
4. After that, your computer should be restarted.

Fix 5: Install all pending updates

Ensure your Automatic Updates option is enabled, and your machine has the most recent updates installed.

Take the following steps:

1. Windows Vista and Windows 7 can open Windows Updates by typing update in the search bar.
2. Windows 8 can open the Charm Bar by pressing the Windows and C keys together, then going to Settings > Change PC Settings.
3. Select Update and Recovery from the menu.
4. Click You can control how updates are installed.
5. In the Important updates section, choose Install updates automatically.
6. Check Check the option under Recommended updates that says, “Give me recommended updates the same way I get crucial updates.”
7. Click the OK button.

Conclusion

I hope you found this information helpful. Please fill out the form below if you have any queries or comments.

User Questions

1. What should I do if a kernel security check fails?

• Examine your computer for memory issues.
• Errors on your hard drive should be checked and fixed.
• Safe Mode is the first option when starting Windows 10.
• Hardware drivers can be uninstalled, reinstalled, or updated.
• Run the System File Checker program.
• Perform a System Restore.
• Perform a clean Windows 10 installation.

2. How can I fix the blue screen of death in Windows 8 and 10 due to a kernel security check failure?

• Click Shutdown while holding down the SHIFT key on your keyboard and clicking the Power button.
• Turn on your computer once more.
• Examine whether the “BSOD KERNEL SECURITY CHECK FAILURE” issue has been resolved.
• If it does, permanently disable the rapid start-up feature.

3. What is a security check failure in the Windows kernel?

Kernel Security Check Failure is an error message that appears on the screen when specific data files are corrupted in Windows 10. It is not a virus in and of itself. However, malware and virus infections, incompatible settings, memory concerns, erroneous Registry modifications, and other factors could contribute to data corruption.

4. I keep getting the ‘Kernel security check failure’ BSoD

I keep getting the ‘Kernel security check failure’ BSoD from Windows10

5. Computer keeps blue screening randomly saying “Kernel Security Check Failure error “

Computer keeps blue screening randomly saying "Kernel Security Check Failure error " from windows