How to: Fix Windows 10 Update Error 0x80242ff

0
59
How to: Fix Windows 10 Update Error 0x80242ff

Here we can see, “How to: Fix Windows 10 Update Error 0x80242ff”

  • When Windows is attempting to install updates, the error 0x80242ff can occur.
  • Most of the time, it’s a matter of program settings, and we’ll show you how to accomplish it.

Windows Update is a critical component of Windows 10 that ensures you have the most up-to-date security and stability upgrades and the best possible Windows performance.

However, numerous mistakes can arise before to or during the updating process. The error code 0x80242ff is included in the extensive list of errors.

This usually happens when you upgrade from Windows 7/8.1 to Windows 10. The system updates will not finish downloading after the Windows 10 installation is completed.

If you run into this issue as well, we have a couple of remedies that should cure the problem.

Also See:  Next iPad delay tipped: Now likely best time to buy

How do I fix Windows 10 update error 0x80242ff?

1. Scan your system for malware

Antivirus software is the most prevalent cause of update error 0x80242ff. A third-party antivirus program can sometimes cause problems with Windows Update by interfering with your PC.

However, you may easily resolve this issue by deactivating specific antivirus capabilities or completely uninstalling the software.

If disabling it doesn’t cure the problem, you should try removing your antivirus and seeing if it helps.

Additionally, switching to a different antivirus solution can be a smart option.

Many excellent antivirus programs are available, but if you want an antivirus that will provide optimum protection without interfering with your system, VIPRE is an excellent choice.

It ensures total security by preventing processes from hijacking while the real-time online security feature is active.

2. Check the Proxy status

While malware is the most well-known cause of this and other issues, a proxy or VPN can impede or stop an update. Make sure they’re turned off while you’re updating.

You may also use Command Prompt to verify the status of your proxy:

    1. Run Command Prompt by right-clicking Start (Admin).
    2. Type in the command line
      • netsh winhttp show proxy
    3. Everything is fine if you are prompted with a Direct Access (no proxy server) notice.

To disable your proxy, perform these steps:

    1. To access the Settings app, press Windows Key + I.
    2. Go to the Network & Internet area now.
    3. Select Proxy from the left-hand menu. Disable all options in the right pane.

Your proxy should be disabled after that, and the update error 0x80242ff should be addressed. If you still want to preserve your online anonymity, we strongly advise you to use a VPN rather than a proxy.

3. Check the integrity of your system files

    1. Select Command Prompt (Admin) from the list by pressing Windows Key + X. (or PowerShell for older systems).
    2. Press Enter after typing sfc /scannow.
    3. The SFC scan will begin now. Do not interrupt the scanning process, which can take up to 15 minutes.

If there are any corrupt files, this method discovers them and fixes them. Check if the problem persists after the SFC scan is completed.

If this is the case, you should run a DISM scan. Follow these steps to accomplish this:

    1. As an administrator, open Command Prompt.
    2. Press Enter to run the following command:
      • DISM /Online /Cleanup-Image /RestoreHealth
    3. Again, the scanning process should take around 20 minutes, so don’t get in the way.

Check if the problem has been resolved after the DISM scan has been completed. You may also run the SFC scan again to see if it resolves the issue.

4. Start system in Clean Boot

    1. Enter msconfig and press Enter by pressing Windows Key + R.
    2. Select Hide all Microsoft services from the Services tab.
    3. Then click Disable All and then Apply to confirm.
    4. Select Open Task Manager from the Startup tab.
    5. Press OK to disable each startup program individually.
    6. Restart your computer and try again.

5. Reset Windows Update services

    1. As an administrator, open Command Prompt.
    2. Disconnect from the internet.
    3. Now, one by one, perform the following commands:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
ren C:WindowsSoftwareDistribution SoftwareDistribution.old
ren C:WindowsSystem32catroot2 catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
exit

After performing these commands, reconnect to the Internet and restart your computer. Check if the problem has been resolved when your computer has restarted.

6. Turn off the Windows Firewall

    1. Type firewall in the Windows Key + S box.
    2. Select Windows Defender Firewall from the drop-down menu.
    3. Turn on or off Windows Defender Firewall.
    4. Select Turn off Windows Defender Firewall for both private and public networks (not recommended).
    5. After that, click OK to save your changes.

Check if the problem persists after disabling Windows Firewall. If the problem has been resolved, update Windows and then re-enable the firewall.

7. Download the update from the Microsoft Update Catalog

If you are experiencing update error 0x80242ff, you may be able to resolve the issue by downloading the update straight from Microsoft’s online Update Catalog.

Before you do so, go to your device’s Windows Update section and look for the update code for the update you’re trying to install.

The update will include KB and a number array. Once you’ve located the update code, follow these steps:

    1. Enter the update code in the search box on the Microsoft Update Catalog website.
    2. Select the update that is compatible with your PC’s architecture and click the Download button.
    3. Double-click the setup file once it has finished downloading to begin the installation.

Your Windows will be upgraded to the newest version after the update is installed.

Keep in mind that while this solution may not solve the underlying issue, it will allow you to bypass the error notice and install the update.

8. Perform an in-place upgrade

    1. Run the Media Creation Tool after downloading it.
    2. Upgrade this PC right now.
    3. Wait for the setup to finish preparing the necessary files.
    4. Choose the option to download and install updates (recommended).
    5. Now press the Next key.
    6. The setup will now download the updates. Be patient, as this may take some time.
    7. After the updates have been downloaded, follow the on-screen instructions.
    8. Change what to keep when you get to the Ready to install screen.
    9. Click Next after selecting Keep personal files and apps.
    10. Complete the setup by following the instructions.

You’ll have a fresh, up-to-date version of Windows after you finish the in-place upgrade. Naturally, all of your files and programs will be saved, allowing you to pick up where you left off.

These were some suggested solutions to the update issue. We sincerely hope you find it helpful and can quickly resolve the 0x80242ff error.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.