Windows 10 Update Error 0x800703ed

76
Windows 10 Update Error 0x800703ed

Here we can see, “Windows 10 Update Error 0x800703ed”

  • Start by turning off specific antivirus features if you’re experiencing problem 0x800703ed because antivirus software is frequently the root of update difficulties. You might need to completely deactivate or uninstall your antivirus if that doesn’t work.
  • Next, you might wish to check your machine for file damage if you can’t upgrade to Windows. You only need to perform an SFC scan to accomplish it. Observe the directions in our guide.

With several stability updates and timely support, Windows 10 significantly advances in many areas.

However, despite the high expectations we have for Windows 10, there are still a ton of problems that require fixing.

Yes, we are referring to planned update failures and update errors.

The code for the error that we’ll try to fix today is 0x800703ed. System file corruption or defective drivers are the main causes of this issue.

So, if you’ve run into a problem with this code, just follow these instructions.

Also See:  feature update to windows 10, version 1903 - error 0x80070020

How can I fix Windows 10 update error 0x800703ed?

Problematic update error 0x800703ed can prohibit you from installing the most recent updates. Speaking of update faults, the following problems were mentioned by users:

    • Windows 10 update failed dual boot – Users claim that running dual boot on your PC can cause this problem. Make your system partition active to solve the issue and see if that works.
    • 0x800703ed Windows 10 upgrade – Your drivers may be the cause of this issue if you’re experiencing it. However, you can resolve the issue by installing the most recent drivers.

Solution 1 – Use SFC and DISM scans

You might wish to check your system for file damage if error 0x800703ed prevents you from updating Windows to the most recent version. Perform an SFC scan to accomplish it. You can accomplish this rather easily by doing the following:

    1. To access the Win + X menu, press Windows Key + X. Select Command Prompt (Admin) from the menu at this point. You can also use PowerShell if Command Prompt isn’t available (Admin).
    2. Enter sfc /scannow and hit Enter to launch it from the Command Prompt.
    3. SFC scan is about to begin. Do not interrupt the scan because it may last up to 15 minutes.

Check to see if the issue is still present when the scan is finished. Next, you should do a DISM scan if you cannot run an SFC scan or if the problem persists. Follow these steps to do that:

    1. As an administrator, launch Command Prompt.
    2. Now issue the command DISM /Online /Cleanup-Image /RestoreHealth.
    3. Watch for the DISM scan to be completed. Be patient; this process typically takes up to 20 minutes.

Check to see if the problem is still present once the DISM scan is finished. If you previously were unable to execute the SFC scan, give it another go and see if it fixes the issue.

Solution 2 – Use batch file to reset Windows Update components

We know that sometimes troubleshooting may be irksome, especially with complicated problems. Furthermore, if you lack the necessary experience, you might create new issues that are far more difficult to fix.

The script that can perform any task instead of you was written by tech enthusiasts, which is a good thing. All you have to do is download and launch it. Use this useful tool by following these guidelines:

    1. Click here to get the script.
    2. File saving.
    3. Click, then select Run as administrator.
    4. Check for updates when the procedure has been completed.

This script can also be used to debug any update-related issue.

Solution 3 – Update BIOS

Updated BIOS is one item that is crucial for the overall performance of the system. Some of the users could not even install Windows 10, and others ran into several problems once it was done.

As a result, we encourage you to swap out your old BIOS drivers with new ones.

However, the procedure is dangerous and necessitates a certain level of expertise. If you’re unsure of what you’re doing, we advise you to seek further clarification before proceeding with the flashing operation and changing the BIOS firmware.

Solution 4 – Update GPU and Network drivers

According to users, your PC may experience this problem due to outdated drivers. It would be necessary for us to advise you to update your drivers if you’re experiencing error 0x800703ed.

Your GPU and network drivers are probably out of date, which is why upgrading them is recommended to resolve the issue.

Visit the website of the manufacturer of your hardware to download the most recent drivers, then update your drivers. If you know the model of your hardware and how to get your drivers, this process is rather straightforward.

You can always use an automated program to get the required drivers automatically if you don’t want to download them manually.

Solution 5 – Use Windows boot

According to users, if you are running Windows and Linux simultaneously in dual boot mode, you may have error 0x800703ed. To solve the issue, you must configure your computer to use Windows boot rather than Linux boot.

You will require a third-party program, such as easyBCD, to accomplish that. The problem should be totally fixed if you simply configure your computer to boot from Windows.

Solution 6 – Check your antivirus

Update issues are frequently caused by antivirus software; therefore, if you have error 0x800703ed, be sure to turn off specific antivirus capabilities. You might need to completely deactivate or uninstall your antivirus if that doesn’t work.

If uninstalling the antivirus fixes your issue, now might be the ideal moment to think about switching to a different antivirus program.

Why not get an antivirus that won’t prevent Windows from functioning properly? Alternatively, it won’t obstruct any Windows Updates.

Solution 7 – Make sure that your system partition is set to Active

Users claim that this problem may arise if your system partition isn’t set to Active. You only need to alter your partition settings to solve the issue. You can accomplish this relatively easily by doing the following:

    1. To access the Win + X menu, press Windows Key + X. Select Disk Management from the list at this point.
    2. To mark a partition as active, right-click it and select Mark Partition as Active from the menu.

Try again to install the update after you’ve done that. You can use any other third-party disk management program if you don’t want to use Disk Management.

Solution 8 – Disconnect all unnecessary devices

Your USB devices may be the source of the issue 0x800703ed that prevents you from updating Windows 10. Other gadgets can occasionally interfere with your PC, which can cause this problem and many others.

Users advise disconnecting all gadgets from your computer, except for your keyboard and mouse, to solve the issue.

Make sure to unplug your second monitor if you have one, and then see if it fixes the issue. You might also want to try setting your resolution to 1024 x 768, as some users have suggested doing before attempting to install the update.

Solution 9 – Change update settings

According to users, your update settings may occasionally be the root of update problem 0x800703ed. Your settings may conflict with your system, resulting in this and other issues.

However, you can easily resolve the problem by making a few configuration changes. Just do the following actions to do that:

    1. For the Settings app to launch, press Windows + I.
    2. Navigate to the Update & Security section in the Settings app.
    3. Select Advanced options now.
    4. Select Delivery Optimization by going all the way down the page.
    5. Disable the ability to accept downloads from other PCs.

Try again to install the update after you’ve done that.

Solution 10 – Repair system with USB/DVD system installation media

In addition to the clean installation, we have one more option for you. If the earlier workarounds weren’t successful, you could fix the update problems by installing the system from a USB or DVD drive.

Although the procedure takes a while, it is unquestionably worthwhile. Pay great attention to these instructions:

    1. When installing Windows 10, insert a DVD or USB (the same architecture and version you have running on your PC).
    2. Open the drive, then select Setup twice.
    3. Hold off until the setup is ready.
    4. Making the decision to download and install updates.
    5. Please accept the license terms after updating.
    6. Select the items you want to keep.
    7. You will now just have to wait for the procedure to be completed.
    8. Your only option if the update troubles persist is a clean reinstallation.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions

1. What does error code 0xC1900101 mean?

The generic rollback code 0xC1900101 typically denotes the presence of an incompatible driver. An incompatible driver can lead to blue screens, system hangs, and unforeseen reboots.

2. How can I fix Windows 10 error 0x80240fff?

    1. Launch the Windows Update Troubleshooter. Restart your computer. Disable any VPN connections and antivirus software. Run the Windows Update Troubleshooter.
    2. Windows Update Services should be restarted.
    3. Activate the System File Checker.
    4. Install the most recent version of Windows manually.

3. Why can’t I use a USB to install Windows 10?

You cannot install Windows 10 using a USB stick if there is insufficient free space on your PC’s hard drive or solid-state drive. The 32-bit version of the operating system, which is popular for tablets and less expensive laptop machines, requires at least 16GB of free space to be installed. It will need at least 20GB of space for the 64-bit version.

Also See:  How to: Fix the Mouse Lag in Doom Eternal

4. Getting error 0x800703ed when trying to update to newest … – Reddit

Getting error 0x800703ed when trying to update to newest build on Lumia 640 from windowsphone

5. Error 0x800703ed while updating to the AU : r/Windows10

Error 0x800703ed while updating to the AU from Windows10