Here we can see, “Why Rebooting Your Router Fixes So Many Problems”
The internet is down, but you recognize what to do: unplug your Router or modem, wait ten seconds, then plug it back in. It’s habitat now, but why does it work? And is there some magic to the ten-second number?
And the even bigger question: is there how you’ll stop doing this?
Routers can feel mysterious, but they’re not. And if you recognize what’s going wrong, you’ll usually solve the matter.
Your Router Is a Computer
You might not consider it this manner, but your Router may be a computer. Inside that plastic box may be a CPU, memory, and native storage, all running an OS. And sort of a computer, things can fail from time to time. Maybe a bug is causing a memory leak, the CPU is overheating, or even a full-blown kernel panic has taken down the whole system.
What’s the only fix for these kinds of computer problems? Turning it on and off again.
Your Router is the same: every reason rebooting a computer can solve problems apply. a bit like on your computer, you’re not solving whatever is causing the Router to crash. Still, you’re allowing it to run properly again.
Sure, this doesn’t fix systematic problems, but it generally solves things within the short term.
Do You Really Need to Wait 10 Seconds?
That answers why unplug bits of help, but why does one have to unplug for 10 or 30 seconds? Well, have you ever unplugged a gadget only to ascertain the facility indicator light stays for a couple of seconds? There’s a reason that happens, and it’s connected to our answer here.
Most electronics make liberal use of capacitors, which are tiny batteries. You’ve seen these before if you’ve ever taken apart a computer or gadget.
They don’t store tons of energy but can sometimes have only enough to stay a chip running for a couple of seconds. Waiting 10 seconds ensures that each capacitor is fully drained, and thus equally of memory is cleared. In addition, this ensures that each one of the settings on your Router are reset, including anything which may have caused the crash in the first place.
As we’ve established, there are multiple reasons your Router might get to be reset. Not all of those problems would require a ten-second discharge, which is why some problems are often solved without the wait. However, if you’re troubleshooting a replacement problem, the ten-second wait could be the difference between working and not working.
What Causes Routers to Crash?
As with any piece of hardware, there are all kinds of potential reasons your Router might crash and need a restart. Here are a couple of potential reasons:
- Run-of-the-mill crashes. As a computer, your Router can crash due to bugs within the firmware eating up an excessive amount of memory or causing a kernel panic.
- IP Address conflicts. Your Router manages both private and public IP addresses, and sometimes it messes up. For example, if two devices on your network have an equivalent IP address, or your Router doesn’t have an up-to-date public IP address, your connection might break. Restarting the Router resets these IP assignments so things can start working again.
- Overheating. Like all computers, your Router can overheat—especially if you retain it in an indoor space to cover it from view—causing it to crash.
There are more potential reasons, but these are the foremost common. And there are a couple of relatively simple solutions for them.
One Solution: Update Your Firmware
When your computer has persistent bugs, a software solution is usually the fix. But, unfortunately, an equivalent goes for your Router: it needs updates too.
We’ve outlined how to update your Router within the past so that we won’t rehash that here. But the method isn’t as hard as you think: you sometimes just got to open your browser, type your Router’s IP address, and find the Update button.
If there’s a documented reason your Router keeps crashing, a firmware update should hopefully fix it. Provides it an attempt.
Another Solution: Check for Overheating
Computers crash once they overheat, and your Router is that the same way. So if it feels hot once you unplug, consider trying to unravel for warmth.
Your Router likely has vents; make sure that they aren’t covered up, a bit like you are doing for your computer. If your Router is filled with dust, consider cleaning it out with some compressed gas.
It’s also a simple idea to sure your Router is a call at the open, not during a small cabinet surrounded by other electronics. I know routers are ugly, but they need to be called at the open—it’ll help with heat management and provides you better signal range, so it’s a win-win.
A Temporary Solution: Automatically Reboot Your Router
In the meantime, while you’re trying to troubleshoot the matter, you’ll solve a number of your rebooting woes by rebooting your Router on a schedule—that way. Then, hopefully, you’ll get to roll in the hay manually less often.
You have a couple of options here. First, you’ll stick your Router on a run-of-the-mill outlet timer, which can cut the facility at a time you specify and let the facility flow again at a time you specify. That way, you’ll set the Router to reboot once or twice each day to keep things moving.
If you’re a touch more of an intrepid geek, you’ll set a script to run on your Router that reboots it occasionally, accomplishing an equal thing.
Again, this isn’t a real solution, but it’s a nice hacky workaround that’ll keep you from having to reboot it manually all the time…at least until you discover a true solution.
If All Else Fails, Get a New Router
If none of this helps, it’s going to be time to bite the bullet and upgrade to a replacement router. A bit like a computer that won’t’ stop having problems, sometimes it’s just time to maneuver on. You’ll remove a bit of hardware that’s constantly breaking from your life, and you’ll get access to all or any sorts of new features. Seriously: wireless technology has come an extended way within the past few years, so if you’re using something a touch older, you’ll get your money’s worth by upgrading to something more modern anyway.
And you won’t get to do the unplug-wait-replug ritual anymore.
I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.
- Why does reboot a router fix problems?
Restarting it clears its memory and resets tasks that might’ve stalled. one of its most important jobs is handing out unique IP addresses for every device connected to that. If you’ve got tons of devices requesting addresses or devices frequently jumping on and off the network, the Router sometimes can’t continue.
- Why do routers got to be reset?
Your Router manages both private and public IP addresses, and sometimes it messes up. For example, if two devices on your network have an equivalent IP address, or your Router doesn’t have an up-to-date public IP address, your connection might break. Restarting the Router resets these IP assignments so things can start working again.
- Why does home WIFI keep disconnecting?
Your internet keeps ablation for a variety of reasons. Your Router could also be out of date, you’ll have too many wireless devices crowding your network, cabling could also be faulty, or there could also be traffic jams between you and, therefore, the services that you use. Some slowdowns are out of your control, while others are easily fixed.
4.ELI5 Why I want to reset my router/modem periodically because it simply stops working
- I have to restart my home Wifi router about twice every week. Am I doing something wrong?