How to: Fix Pc Won’t Exit Sleep Mode

0
27
How to: Fix Pc Won’t Exit Sleep Mode

Here we can see, “How to: Fix Pc Won’t Exit Sleep Mode”

The ability of Microsoft-based platforms to keep their power consumption low when they are not in use is one of their oldest features. Sleep and Hibernate are the two main low-power modes on your Windows PC. The third is called Hybrid Sleep, and it was first introduced with Windows Vista. Hybrid Sleep combines the advantages of both approaches.

While the sleep mode is incredibly important for conserving energy and keeping PC hardware in good working order, it appears to have several flaws. Several customers reported having problems restarting their computers once they were set to sleep.’ The problem is most common on laptops with the automatic sleep option set, while it can also occur on desktop configurations.

If you’re having trouble with this, we’ve compiled a list of potential remedies that are worth a go.

Also See:  How to Install Custom Themes and Visual Styles in Windows

What to do if PC won’t exit from Sleep Mode

Fix – Unable to exit Sleep Mode in Windows 10

Solution 1 – Change Sleep options for mouse and keyboard

Your PC’s interface can only be accessed via mouse and keyboard. They are sometimes the cause of Sleep mode not working properly. Follow these steps to check sure your mouse and keyboard aren’t the sources of the problem (this only applies to USB devices; PS/2 devices aren’t included):

    1. Type Device Manager Select into Windows Search, and then look for your mouse and keyboard in the list of devices.
    2. Bring up the drop-down menu and choose the appropriate properties for each.
    3. Check the Power Management card box that says, “Allow the computer to turn off the device to save power.”
    4. Then check the box that says, “Allow the device to wake the computer.”

If a mouse or keyboard causes the problem, this will remedy the problem. If the mouse and keyboard aren’t the problems, try one of the suggestions below.

Solution 2 – Change your Power Settings from Sleep to Hibernate

In rare circumstances, the Hibernate option can be a wonderful replacement for a broken Sleep. As a result, we’ll show you how to disable the Sleep option fully and instead use Hibernate. We walked you through it step by step.

    1. Type Power into the Search Windows bar.
    2. Power & Sleep are both open.
    3. Select Never in the Sleep section.
    4. After that, go ahead and open Additional Power Settings.
    5. Change plan settings by selecting your active Power plan.
    6. Then select Change advanced power settings from the drop-down menu.
    7. Expand the Sleep option in the list.
    8. Make sure Sleep is set to never and Hibernate is set to your favorite time.
    9. To save your settings, select OK.

Instead of sleeping, your computer should go into hibernation mode.

If the Hibernate option is absent from the Start Power Button and you wish to place it manually, do as follows.

    1. Type Power into the Search Windows bar.
    2. Power & Sleep are both open.
    3. Select Additional Power Options.
    4. Choose what the power buttons do on the left.
    5. Change the Sleep to Hibernate option on the Sleep button.
    6. Change any options that are presently unavailable by clicking Change.
    7. Check Hibernate instead of Sleep.
    8. Changes should be saved.

The Hibernate option will be added to the Start Power Button as a result of this.

Solution 3 – Update graphics card driver

This problem has been reported by some users to be caused by an outdated graphics card driver. As a result, check sure your drivers are up to date. Follow these instructions if you’re not sure how to update your drivers:

    1. Open Device Manager by going to Search and typing devicm.
    2. Display Adapters should be expanded.
    3. Select Update driver from the context menu when you right-click your graphics card.
    4. Follow the on-screen directions and wait for the wizard to locate the driver update.
    5. Restart your computer when you’ve completed the process.

Update drivers automatically

If you don’t want to look for drivers on your own, you can utilize a tool that will do it for you. Of course, you won’t be able to utilize this tool because you can’t access the internet right now. However, once you have access to the internet, you will be able to maintain all of your drivers up to date, and you will no longer be in this scenario.

A dedicated third-party tool will assist you in automatically updating drivers and preventing PC harm caused by incorrect driver versions. Our team determined that this is the best-automated option after doing multiple testing.

Solution 4 – Enable the Balanced power plan

Your power plan mostly determines the manner your computer turns off and goes to sleep. As a result, the Balanced option is recommended for the best outcomes. Here’s how to get started with the Balanced Power Plan:

    1. Open Command Prompt as Administrator by going to Search and typing cmd.
    2. Enter the command powercfg -restoredefaultschemes at the command prompt.
    3. Restart your computer.
    4. Open the Control Panel when your machine starts up.
    5. Select “Small icons” from the drop-down menu next to “View by:” in the upper right corner of the window.
    6. Go to the Power menu.
    7. Double-check that the Balanced option is selected in the new window.

Solution 5 – Turn off Hibernation

You may have trouble waking up your computer if it is set to hibernate rather than sleep. As a result, ensure sure the Hibernation mode is turned off:

    1. Open Command Prompt as Administrator by going to Search and typing cmd.
    2. Type “powercfg /h off” to switch off the Hibernation feature on your PC – keep in mind that if you’re using a laptop, this means you’ll lose any available work when the battery dies, so keep that in mind.
    3. Simply restart your PC after running the command – it should give you no output if it worked.

Solution 6 – Run the Power Troubleshooter

We would use Windows 10’s built-in troubleshooting tool if none of the other alternatives worked. This tool can be used to solve a variety of difficulties, including electricity challenges. As a result, it might be useful in this situation.

Here’s how to use the built-in troubleshooter in Windows 10:

    1. Go to the Settings menu.
    2. Go to Updates & Security > Troubleshoot to get started.
    3. Go running the Troubleshooter after selecting Power.
    4. Continue following the on-screen instructions and wait for the process to complete.
    5. Your computer should be restarted.

Solution 7 – Enable Hybrid Sleep

Some users have also claimed that the Hybrid Sleep option can make it difficult to wake up. As a result, we’re going to turn it off. Here’s how to do it:

    1. Open Power settings by right-clicking the Battery icon in the notification box.
    2. On your active power plan, click “Change plan settings.”
    3. Change advanced power settings by clicking the Change advanced power settings button.
    4. Allow Hybrid Sleep after Expanding Sleep.
    5. Hybrid sleep should be enabled for both the battery and the air conditioner, and the adjustments should be confirmed.

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions

1. In BIOS, how do I disable sleep states?

Go to Power Management, and Suspend Mode once you’re in the BIOS. There’s an option to switch the default suspend mode from S3 to S1 there. To quit the BIOS, change it and press Esc (be sure to select the Save option when it prompts you to save the settings).

2. How can I use the keyboard in Windows 10 to wake up my computer?

It’s simple to wake up your computer from sleep mode. To wake the computer, simply press any key on the keyboard or move the mouse (on a laptop, move fingers on the trackpad).

3. How do you wake up a pc that is stuck in sleep mode?

    1. Allow your PC to be awakened by your keyboard and mouse.
    2. Drivers for your devices need to be updated.
    3. Turn off the rapid starting option.
    4. Hibernation should be enabled again.
    5. Make adjustments to the power settings.
Also See:  How to Stop Siri from Popping Up on Your Apple Watch

4. (Please help me) computer won’t leave sleep mode – Reddit

(Please help me) computer won’t leave sleep mode from buildapc

5. My computer won’t wake up from sleep mode : r/pcmasterrace

My computer won’t wake up from sleep mode from pcmasterrace