How to: Fix Netlogon Folder Doesn’t Replicate

Here we can see, “How to: Fix Netlogon Folder Doesn’t Replicate”

Using an Active Directory is one of the most effective ways for an IT Administrator to organize your company’s users, computers, and other resources. It coordinates the entire hierarchy of your firm, including which machines belong on which networks.

This might range from insignificant details like your profile image to more complex issues like users’ access to a specific file.

However, using Active Directories, things don’t always proceed as anticipated, as some customers have noticed problems with particular folder replications:

In my company’s AD, we have three DC’s (two in 2008R2 standard, one in 2012R2 standard core).
I’ve found that NETLOGON folder content is not replicated correctly across them

Thankfully, consumers received greater information about how the problem expressed itself, and a remedy was found soon. If you’re experiencing similar problems, keep reading for a step-by-step explanation of how to resolve the problem.

How do I make the NETLOGON folder replicate properly?

You must first determine which folder contains the most recent contents or which folder contains programs that run without errors.

The Master Domain Component is then declared, while the other Domain Components are declared as Slaves. A replication from Master to Slave is then programmed.

1. Perform a non-authoritative synchronization

1. 1. ADSIEDIT.msc is a utility that you can download and install.
   2. In the ADSIEDIT.MSC tool modify the following distinguished name (DN) value and attribute on each of the domain controllers that you want to make non-authoritative:
      • CN=SYSVOL Subscription
      • CN=Domain System Volume
      • CN=DFSR-LocalSettings
      • CN=<the server name>
      • OU=Domain Controllers
      • DC=<domain>
      • msDFSR-Enabled=FALSE

1.1 Force Active Directory replication throughout the domain.

1. 1. On the same servers that you marked as non-authoritative, run the following command from an elevated command prompt:
      • DFSRDIAG POLLAD
   2. The DFSR event log will show Event ID 4114, indicating that SYSVOL is no longer replicated.
   3. Set the following DN on the same DN as in Step 1:
      • msDFSR-Enabled=TRUE

1.2 Force Active Directory replication throughout the domain.

1. 1. On the same servers that you marked as non-authoritative, run the following command from an elevated command prompt:
      • POLLAD DFSRDIAG

The DFSR event log will show Event ID 4614 and 4604, indicating that SYSVOL has been initialized. That domain controller has now completed a SYSVOL “D2” procedure.

2. Perform an authoritative synchronization

1. 1. Modify the following DN and two properties on the domain controller you want to declare authoritative in the ADSIEDIT.MSC tool:
      • CN=SYSVOL Subscription
      • CN=Domain System Volume
      • CN=DFSR-LocalSettings
      • CN=<the server name>
      • OU=Domain Controllers
      • DC=<domain>
      • msDFSR-Enabled=FALSE
      • msDFSR-options=1
   2. On all other domain controllers in that domain, change the following DN and single attribute:
      • CN=SYSVOL Subscription
      • CN=Domain System Volume
      • CN=DFSR-LocalSettings
      • CN=<each other server name>
      • OU=Domain Controllers,DC=<domain>
      • msDFSR-Enabled=FALSE

2.1 Force Active Directory replication throughout the domain and validate its success on all DCs

1. 1. Set the DFSR service to authoritative and start it.
   2. The DFSR event log will show Event ID 4114, indicating that SYSVOL is no longer replicated.
   3. Set the following DN on the same DN as in Step 1:
   4. msDFSR-Enabled=TRUE

2.2 Force Active Directory replication throughout the domain and validate its success on all DCs

1. 1. On the same server that you set as authoritative, run the following command from an elevated command prompt:
      • DFSRDIAG POLLAD
   2. The DFSR event log will show Event ID 4602, indicating that SYSVOL has been initialized.
      • That domain controller has completed a SYSVOL “D4”.
   3. On the other non-authoritative DCs, start the DFSR service.
   4. The DFSR event log will show Event ID 4114, indicating that SYSVOL is no longer replicated on each of them.
   5. On all other domain controllers in that domain, change the following DN and single attribute:
      • CN=SYSVOL Subscription
      • CN=Domain System Volume
      • CN=DFSR-LocalSettings
      • CN=<each other server name>
      • OU=Domain Controllers,DC=<domain>
      • msDFSR-Enabled=TRUE
   6. Run the following command on all non-authoritative DCs from an elevated command prompt:
      • DFSRDIAG POLLAD

Conclusion

I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions

1. How do you make websites replicate each other?

1. 1. The Active Directory Sites and Services snap-in should now be open.
   2. Navigate to the NTDS Setting object for the domain controller to which you wish to replicate.
   3. Right-click the connection object to the domain controller you wish to replicate from in the right pane and select Replicate Now.

2. What happened to netlogon?

The Net Halt and Net Pause commands can be used by server administrators to stop or pause the service. The netlogon service can also be stopped by problems, such as errors in Windows programs that prevent the netlogon service from working with wireless Internet. Netlogon services are also hampered by registry problems.

3. In Active Directory, how do you force replication?

To do so, launch the console and navigate to the domain controller you want to replicate. Changes will be requested from this domain controller’s replication partners. Next, locate the connection you wish to force replication over, right-click it, and choose to Replicate Now from the menu.

4. DCs Not Replicating? : r/sysadmin – Reddit

DCs Not Replicating? from sysadmin

5. server 2016 Not creating Sysvol or netlogon shares and thus 

server 2016 Not creating Sysvol or netlogon shares and thus not replicating with a 2012 (not R2) Only DC on domain from activedirectory