how to fix slow ssd command prompt windows 10

how to fix slow ssd command prompt windows 10

Here we can see, “how to fix slow ssd command prompt windows 10”

How to Fix Slow SSD Performance in Windows 10

A Solid State Drive (SSD) can greatly hamper many reasons, as is clear with every robot. However, sometimes the SSD doesn’t hamper itself, but a problem associated with an external factor is causing this to happen. Let’s glance at the explanations and solutions that cause a clear slowdown within the SSD’s Windows 10.

Recommended Act

ST Cleaner is one of the simplest system optimizers and system cleaners in town. It helps:

  1. Optimize also as pack up the System Cache
  2. Clean up plenty of Junk Data
  3. Clean up Internet junk to optimize its speed
  4. Sweep clean Software junks to optimize their performance

Solution 1: Disable Onboard VGA

Many users have reported that the painfully slow performance of the SSD vanished once they disabled the onboard VGA feature of their computer. This resulted in a decrease of the system bootup time up to 15 seconds. So here is what you would like to try to do.

  1. Reboot your computer and open BIOS.
  2. Navigate to the Advanced BIOS section.
  3. Search for Onboard VGA.
  4. Now select the Disable option.

Note the specific titles for the choices, and therefore the procedure to navigate also as disable will vary from one motherboard to a different. However, with a touch little bit of intelligent exploration, you’ll easily make your way through and do the trick. Don’t worry, nothing wrong will happen goodbye, as you don’t change a critical worth. And albeit you think that you’ve made a change that you shouldn’t have, there’s always a choice to restore BIOS to its default values to bail you out on such occasions.

Solution 2: Configure Boot Sequence

Another reason the SSD drive is slow is that the bootup sequence is incorrectly configured as a tough drive on top priority means it’ll take tons longer for it to fetch and loads the OS.

  1. Restart your computer and boot into BIOS.
  2. Change the boot sequence of HDD and SSD. (Priority should tend to SSD).

Solution 3: Update BIOS

Another more common reason for the poor performance of an SSD in Windows is thanks to an outdated BIOS. to repair this issue, update BIOS. You’ll download the newest version of BIOS from the website of your computer’s manufacturer. The updated BIOS will include compatibility for brand spanking new hardware, improved cache functions, and other user-friendly hardware tweaks.

Also See:  Touchpad Driver Missing in Device Manager

Solution 4: Check the SATA Port

Most motherboards lately have SATA 3Gbps/ SATA 6Gbps ports. The speed of the port bears heavily on the SSD’s performance. Unfortunately, it isn’t that straightforward to spot the SATA Port. Hence you ought to ask the motherboard’s manual to determine it properly. Usually, motherboards built on Intel chipsets contain an Intel SATA controller. This controller specifically has the very best speed. Therefore the boot device should be connected to the present one. Also, note that the primary SATA port has the best speed, as claimed by most technical blogs.

Solution 5: Check the SATA Cable

Another reason the SSD performance isn’t meeting you expect that the SATA cable is either defective or of a poor quality make. Therefore, make certain always to purchase a SATA cable from a well-known manufacturer.

Solution 6: AHCI Mode is Disabled

The AHCI mode helps bring the simplest out of the SSD. If this mode is disabled, the pc can encounter crashes or see the notorious blue screen of death.

To fix it, attend BIOS Settings, search for the OnChip SATA Type and set it to AHCI.

Solution 7: Update Firmware of the SSD

Like the other piece of software that acts because of the eyes and, therefore, the minds of the hardware, the firmware of the SSD is unquestionably not an exception. That’s why manufacturers release patches and updates periodically. So remember to stay checking for a firmware update. Alternatively, you’ll be toying with an eventuality as extreme as a complete performance disaster. 

Solution 8: TRIM Command Doesn’t Exist or is Disabled

The TRIM command is absolute for the stable performance of SSD. First, confirm the SSD supports TRIM, and it’s enabled on your Windows 10 computer.

  1. Open prompt as an administrator.
  2. Type in fsutil behavior query DisableDeleteNotify and press Enter.
  3. If you get 0. As a result, it means TRIM is already enabled, but it isn’t if you get a 1.
  4. Enable TRIM by executing the subsequent command:

fsutil behavior set DisableDeleteNotify 0

Also See:  Apple could launch a larger iPad Pro than the 12.9 model

Solution 9: SSD Needs Optimization

The SSD accumulates junk a bit like the remainder of the pc. So you would like to optimize it from time to time to revive it to its original spick and span shape. Windows 10 enables you to try to do so very easily.

  1. Search for Disk Cleanup within the Start menu.
  2. Perform the Disk Cleanup process for the SSD to rid it of all the junk.
  3. Now look for defragging and open Defragment and Optimize Drives.
  4. Perform defragmentation for the SSD drive by selecting it and clicking the Optimize button.

Solution 10: The SSD Is Almost Full

As a rule of thumb, the SSD must be a minimum of 20 percent empty so on perform at optimal speeds. Unfortunately, most users don’t realize this fact and keep it up piling their personal data (in addition to the OS) on an equivalent SSD, which accurately bogs it down to success. So make certain to always create a separate partition for the OS and don’t save anything thereon come what may.

Solution 11: Go For the High Power Plan

Most folks keep our computer/ laptop at Balanced Power. The setting is straightforward to vary and may be adjusted by typing in Power within the Search area of the Windows 10 taskbar. Though the SSD doesn’t run fast thanks to the High Power plan, it’s strongly suggested to pick this plan if other devices share Power like the GPUs.

Solution 12: Format the SSD

If you’re employing a pre-used SSD for installing the OS, it’ll perform tons slower than what you’d expect from it. In such a case, Format the SSD before you start the installation.

Right-click the Solid State Drive (SSD), choose Format, or type in format /q to prompt and execute this command.

Solution 13: RAM is Low

Quite possibly, it’s the RAM instead of the SSD which is causing the difficulty. The RAM may need ‘fallen’ to a really low level, leading to a decrease within the cache size and adversely impacting the SSD’s performance.

Remember to feature a minimum of 4GB of RAM for the decent performance of the system if you propose to use Windows 10. And if you’ll be using heavy-duty software programs, then 8GB may be a must-have!

Solution 14: Erase the SSD Contents

After excessive usage of the SSD, it’ll get slow regardless of what you are trying. Therefore secure erase everything saved thereon from time to time by backing up your data to a different disk. If you do not have a ‘secure erase’ feature enabled on the disk, use third-party software to realize equivalent results.

User Questions:

  1. Slow boot on SSD

As the title says, I have had slow Windows 10 boot on an SSD for a month. I went through the only common solutions to the matter described online, but none worked. I’m wondering if the matter is thanks to the newest Windows updates as I see there are too many for the last month (February). I can not even uninstall all of them directly, and that they take an excessive amount of time to get rid of one by one.

Also See:  The Walking Dead: Empires Brings Blockchain Into The Zombie Franchise
  1. SSD running very slowly …

Good p.m. I even have an Intel NUC mini-computer with an HP SSD S700 500GB solid-state drive running.

Windows 10. once I check the “Driver Fine Details,” it shows the SSD driver provider to be Microsoft. 

I recently installed the version 20H2 update. I’m streaming video, buffering it in RAM, and saving the video files like AVI to the SSD. 

  1. Windows 10 Slow Performance on PCIe SSD

I had an equivalent upgrade problem reported elsewhere on my machine (ASUS X99-Pro/USB3.1 motherboard, i7 5820K CPU, 16GB RAM) with a Kingston HyperX Predator M.2 240GB SSD during this forum. Still, a clean install of Win 10 was successful. I noticed random ‘stutters’ (short system freezes lasting from a couple of seconds to 10s). This was particularly noticeable when using Visual Studio 2015. The system event log had several errors concerning problems reading from this disk:

  1. [Help] Windows 10 is suddenly stupid-slow

[Help] Windows 10 is suddenly stupid-slow from Windows10

  1. Fixed a slow booting PC.

Fixed a slow booting PC. from Windows10