How to: Fix BUGCODE USB3 DRIVER Errors in Windows 10

How to: Fix BUGCODE USB3 DRIVER Errors in Windows 10

Here we can see, “How to: Fix BUGCODE USB3 DRIVER Errors in Windows 10”

  • Malfunctioning drivers or a faulty USB port create the BUGCODE USB3 driver error message.
  • The USB 3 hub.sys blue screen can be easily removed by using a third-party system restoration utility.
  • Another easy solution is to use our approach to update your drivers.
  • You can alternatively utilize the Windows BSoD troubleshooter method listed below to resolve the error.

The Blue Screen of Death is one of the most dangerous issues that you might run into on Windows 10.

Because these issues cause your computer to restart every time they arise, we’ll teach you how to cure the BUGCODE USB3 DRIVER error today.

Also See:  Twitter Ticketed Spaces is now rolling out to some iOS users

How can I solve the BSoD error BUGCODE USB3 DRIVER? 

1. Use a third-party BSoD fixer

Using a third-party tool designed to handle it for you, you can repair your system files and get rid of any BSoD errors.

The software keeps you secure and your computer clean by removing unnecessary files and enhancing your system’s health. It’s also simple to use because of its user-friendly interface.

2. Use the BSOD Troubleshooter to find out what’s causing the BSOD

  1. Open the Settings app on your phone.
  2. To troubleshoot, go to Update & Security > Troubleshoot.
  3. From the right pane, select BSOD and then click Run the Troubleshooter.
  4. To finish the troubleshooter, follow the directions on the screen.

The built-in troubleshooting tool in Windows 10 is the next thing we’ll attempt. This utility can be used to troubleshoot various system issues, including BSODs.

As a result, the MSDN BUGCHECK bugcode usb3 driver error is likely to be resolved. To understand how to troubleshoot your computer, follow the same basic procedures outlined above.

3. Get the most recent drivers

Drivers are an essential component of any operating system, and if your drivers are faulty or obsolete, Windows 10 will be unable to identify or use your hardware.

Suppose you use third-party software to update your drivers. In fact, the software will automatically download all of the required drivers. All you have to do is click a couple of times to automate the procedure.

Install this handy and excellent software as soon as possible and never worry about drivers or driver-related issues again.

4. Keep Windows 10 up to date

  1. Type “Settings” into the Windows search bar.
  2. Select Update & Security from the drop-down menu.
  3. After that, choose Windows Update.
  4. Press the Check for Updates button on the right.
  5. Allow Windows to look for an updated version.
  6. Follow the steps if it finds one.

Hardware and software difficulties plague almost every operating system, and Windows 10 is no exception.

These flaws can sometimes result in BSoD errors, such as BUGCODE USB3 DRIVER, and to correct these errors, you must get the most recent updates.

Some upgrades include security enhancements and new features, but many of them also include hardware and software problem patches, making it critical to update to avoid BSOD failures.

5. Perform an SFC scan

  1. Open Command Prompt by right-clicking on the Start Menu button (Admin).
    • sfc/scannow
  2. Wait till the procedure is completed (it may take a while).
  3. If a solution is found, it will be applied automatically.
  4. Restart your computer after closing the Command Prompt.

The System File Checker is the following troubleshooting tool we’ll test. This program checks your computer for any problems and automatically fixes them (if possible).

If a corrupt system file is causing the BUGCODE USB3 DRIVER issue, the SFC scan will fix it.

6. Execute DISM

  1. Open Command Prompt by right-clicking Start (Admin).
  2. Press Enter after pasting the following command:
    • DISM/Online/Cleanup-Image/RestoreHealth
  3. Wait for the scan to complete.
  4. Restart your computer and try again with the update.

DISM is the third troubleshooter we’re going to test. This program re-deploys the system image while also resolving any difficulties that may arise.

As a result, executing DISM will probably fix the BUGCODE USB3 DRIVER problem as well.

With the installation media for Windows

  1. Place your Windows installation media in the drive.
  2. The Windows Media Creation Tool can help you make one.
  3. Right-click the Start menu and select Command Prompt from the menu (Admin).
  4. Type the following commands in the command line, pressing Enter after each one:
    • dism/online/cleanup-image/scanhealth
    • dism/online/cleanup-image/restorehealth
  5. Now type and hit Enter the following command:
    • DISM/Online/Cleanup-Image/RestoreHealth/source:WIM:X:SourcesInstall.wim:1 /LimitAccess
  6. When installing Windows 10, make careful to replace an X value with the mounted drive letter.
  7. Restart your computer once the procedure is completed.

7. Examine the hard disk drive

  1. Go to the Advanced Startup page (Restart your computer while holding the Shift key).
  2. Select Troubleshoot > Advanced Options from the drop-down menu.
  3. Choose Command Prompt from the drop-down menu.
  4. To launch it, open Command Prompt and type the following lines, pressing Enter after each line:
    • bootrec.exe/rebuildbcd
    • bootrec.exe/fixmbr
    • bootrec.exe/fixboot
  5. Some users have suggested that you execute additional chkdsk commands as well.
  6. To run these commands, you’ll need to know the drive letters for all of your hard disk partitions.
  7. You should type the following in Command Prompt (remember to use the letters that correspond to your PC’s hard disk partitions):
    • chkdsk/r c:
    • chkdsk/r d:
    • This is only an example; remember that you must run the chkdsk command for each hard disk partition you have.
  8. Check to see if the problem has been resolved by restarting your computer.

BUGCODE USB3 DRIVER Because your hard drive can generate a BSoD problem, a chkdsk scan is suggested.

8. Locate and uninstall any applications that are causing problems

  1. To initiate the Automatic Repair, restart your computer a few times during the boot process.
  2. Alternatively, you may just hold Shift and hit the Restart button on your keyboard.
  3. Click the Restart button after selecting Troubleshoot > Advanced options > Startup Settings.
  4. Press 5 or F5 when your computer restarts to enter Safe Mode with Networking.

Specific software may not be compatible with your PC, resulting in the BUGCODE USB3 DRIVER or any other Blue Screen of Death issue.

Because your antivirus software is a common cause of these types of issues, we recommend that you uninstall all third-party antivirus products from your computer.

9. Make a BIOS update

Users claim that changing your BIOS will fix the BUGCODE USB3 DRIVER issue. Updating your BIOS allows you to take advantage of new capabilities on your motherboard, using other hardware.

10. During the Windows 10 installation, use a USB 2.0 port

During the installation of Windows 10, a few users reported the BUGCODE USB3 DRIVER BSoD error. According to them, the installation of Windows 10 causes problems with USB 3.0 ports.

To avoid this problem when installing Windows 10 from a USB flash drive, make sure the flash drive is connected to a USB 2.0 port.

If your computer has a DVD reader, you can also use the Windows 10 DVD to install the operating system.

11. Reset your Windows 10 computer

  1. Restart your computer a few times throughout the boot phase to initiate Automatic Repair.
  2. Select Troubleshoot > Reset this PC from the drop-down menu.
  3. Then choose to Remove everything from the menu.
  4. You may be prompted to insert Windows 10 installation disk at this point, so be prepared.
  5. Select Only the drive on which Windows is installed > Remove all of my files.
  6. To begin, click the Reset button.
  7. To complete the reset, follow the on-screen prompts.

If this error is caused by software, Windows 10 reset is a similar method to a clean install, and it should be able to cure it.

We strongly advise you to build a backup because this method will destroy all files from your C disk. You may also require a bootable USB flash drive containing Windows 10 and creating a backup.

Do not install any drivers or software after the Windows 10 reset is complete. Check your computer for a moment to see if the error returns.

If the error does arise, it signifies that your hardware is to blame, so conduct a thorough hardware inspection and replace any broken components.


I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.

User Questions:

1. What should I do if I get a driver issue on Windows 10?

  1. Drivers can be updated using the Device Manager menu. Windows 10 updates your drivers automatically as new versions are released.
  2. Reinstall the drivers if necessary.
  3. Run the Windows Troubleshooter programme.
  4. Use Windows Security to scan your computer for viruses.
  5. Windows 10 should be updated.

2. What is the procedure for reinstalling USB 3.0 drivers?

  1. Locate anything identified with 3.0 or 3.1 (i.e., USB Root Hub 3.0) within Universal Serial Bus controllers in Device Manager.
  2. Select Uninstall from the context menu when you right-click the driver.
  3. Restart your computer. The driver is automatically reinstalled when the computer is restarted.

3. On Windows 10, how do I install USB 3.0 drivers?

Open Device Manager > Universal Serial Bus controllers > right-click USB Root Hub (USB 3.0) > Uninstall Device > reboot PC to complete the installation. To reinstall a specific device, go to the same place as before, but this time pick Properties > Driver > Update Driver to install from your computer.

Also See:  Convert Black and White Photos to Color Online

4. BUGCODE_USB_DRIVER Blue Screen Error – Reddit

Latest Windows update may have corrupted your USB drivers and may be the cause of recent BSOD and freezing issues from Windows10

5. BUGCODE USB3 DRIVER, using windows on external ssd

BUGCODE USB3 DRIVER, using windows on external ssd from Windows10