Here we can see, “Disable Fast Startup on Windows 10 With These Simple Steps”
- Some customers cannot stop Windows 10’s Fast Startup function because they cannot locate it in the Shutdown settings.
- We took care to provide some clarification and demonstrate three distinct ways for you to ignore the missing UI choice and either get it back or, even better, disable it.
There are certain advantages to The Fast Startup. However, since its release, many customers have upgraded to SSD storage or have dual-boot setups.
Especially if you want to turn off your computer rather than put it in sleep mode (which Fast Startup does).
Even though consumers choose to disable it, Microsoft brazenly re-enables it with a new, significant upgrade.
Even worse, the Fast Startup feature may not be available for some users in the Shutdown settings. As a result, Windows 10’s Fast Startup cannot be disabled.
We took care to provide some clarification and demonstrate three distinct ways for you to ignore the missing UI choice and either get it back or, even better, disable it.
If you cannot disable Fast Startup, look at the remedies we have provided below.
How to definitely disable Fast Startup on Windows 10?
1. Try with the standard approach
We should give it another shot even though you’ve undoubtedly already tried it. Restart your computer first because a momentary bug could be the source of the issue.
If you just recently installed the system, this wouldn’t be the first instance of a system functionality becoming missing. The same may also occur if you’ve updated to the most recent version of Windows 10.
Those often restore Fast Startup by default, although Windows 10 optimization is subject to change.
On the other hand, proceed to the following steps if the Fast Startup option is still absent from the Shutdown settings area.
2. Check BIOS
Examining relevant BIOS/UEFI settings comes next. There may be a problem with Fast Startup, which is, by default, disabled. The Fast Startup option is definitely deactivated if you can’t see it.
We must begin in BIOS, though, if you want to modify your boot settings using the system UI.
Observe these procedures if you’re unsure how to boot into BIOS/UEFI settings:
- To open Settings, press Windows key + I.
- To update and secure, select.
- Choose Recovery in the left-hand window.
- Click Restart now under the Advanced startup section.
- To troubleshoot, select.
- Choose Advanced choices.
- Click Restart after selecting UEFI Firmware Settings.
- After that, switch on Fast Boot and save your modifications.
- Restart your PC after quitting.
3. Try with Local Group Policy Editor
In addition to BIOS (available only on Windows 10 Pro and Enterprise editions), the second approach involves modifying specific Local Group Policy settings.
To limit permissions, you can fully control practically anything on your PC using the Local Group Policy Editor.
Users must, of course, have administrative access to make changes to this.
The Local Group Policy Editor can be used to disable Fast Startup in the following ways:
- Type “Group Policy” into the Windows search box to get Edit group policy.
- To shutdown the computer, go to Computer Configuration > Administrative Templates > System.
- Require usage of the rapid startup is selected by a right-click, then click Edit.
- For Fast Startup to be available in local settings, be sure you select either Disabled or Not configured.
- Verify adjustments and go to Power Options. Decide what the power buttons do. Unavailable settings can be changed, and Fast Startup can be turned off.
- The Fast Boot will be activated by default if you set it to Enabled, and you won’t be able to turn it off under the System settings.
4. Check whether Hibernation is enabled
You may already know that if Hibernation is disabled, Fast Startup won’t function. Windows 10 won’t be able to use the Fast Startup feature if it can’t hibernate.
There is a quick and easy technique to determine whether Hibernation is actually activated on your computer. Run Command Prompt as administrator is necessary.
To restore Hibernation if it has been disabled, follow these steps:
- Type “Command” into the Windows search box.
- To launch it as administrator, perform a right-click on the Command Prompt.
- Enter the following command into the command line:
- powercfg.exe /hibernate on
- Fast Startup should be disabled using the Windows UI after closing the Command Prompt.
Go to Power Options > Hibernation once you’ve enabled it. Decide what the power buttons do. Unavailable settings can be changed, and Fast Startup can be turned off. To proceed, simply uncheck the box next to it.
5. Run SFC and DISM
This remedy is more of a safety measure. Even specific crucial power settings may become unavailable in the event of system damage. And something might always go wrong, especially after a significant update.
System File Checker and Deployment Image Servicing and Management tools are a well-known pair in such cases. Both programs look for system file corruption.
SFC will provide you with a more comprehensive understanding of the issue, whereas DISM is more dependable when applying remedies.
Here’s how to sequentially run SFC and DISM:
- To run the Command Prompt as an administrator, right-click on it and type cmd in the Windows search box.
- Type sfc /scannow in the command line and hit Enter.
- Then, after pasting these lines one at a time, hit Enter:
- DISM /online /Cleanup-Image / ScanHealth
- DISM /Online /Cleanup-Image /RestoreHealth
- Wait till the process is complete (it might take up to 10 minutes).
- Reboot your computer.
6. Use the BAT file
Even though the option is not there in the Shutdown settings, we have now reached two distinct ways to disable Fast Startup. Running a pre-set BAT file that takes care of everything for you is the first and probably simplest method.
To disable it, you won’t have to tinker with the Registry on your own.
Here’s how to use the BAT file to disable Fast Startup:
- Download the BAT script file, here.
- Run the file as an administrator by selecting it with the right click.
- Restart your PC after the changes have been made.
7. Disable Fast Startup via Registry Editor
The final approach we can recommend involves modifying the Registry to disable Fast Startup. Before making any changes to your Registry, we strongly advise backing it up.
Additionally, avoid unintentionally tampering with the Registry and only make approved modifications.
Use Registry Editor to disable Fast Startup by following these steps:
- Type “Registry” into the Windows search box to launch Registry Editor.
- Browse to
- Create a new DWORD by doing a right-click in the right pane.
- Give it the name HiberbootEnabled and set 0 as the value.
- Once you exit Registry, everything should be OK.
I hope you found this guide useful. If you’ve got any questions or comments, don’t hesitate to use the shape below.
1. Can Rapid Startup be turned off?
Click Select the function of the power buttons. Select the Change unavailable settings link. The checkmark will vanish if you choose Turn on fast startup (recommended). To save changes, click.
2. How can I stop programmes from starting up?
You may enter the Task Manager by hitting Ctrl+Shift+Esc and selecting the Startup tab on most Windows machines. If you don’t want a specific program to start up with Windows, choose it from the list and click the Disable option.
3. How can I turn off the quick startup registry?
To launch the Windows 10 Registry Editor, press Windows Key + R, type “regedit” in the run dialogue box, and press Enter. After choosing Power, click twice on “HiberbootEnabled” in the right window pane. To disable Fast startup, set the Value data field’s value to 0 in the pop-up Edit DWORD window.
4. What methods do you use to disable fast startup across your …
What methods do you use to disable fast startup across your domain? from sysadmin
5. Leave fast startup ON or OFF ? : r/windows – Reddit